| Monday, November 23 2009 |
PC cooling products specialist Evercool introduced its Armor case-mounted HDD cooler. The cooler acts as a drive-cage, converting 5.25" drive bays into 3.5" bays, and directs air onto three 3.5" hard drives, while occupying two 5.25" bays. It comes with a metal front bezel with perforated metal for the intake. Bezel colors include black and silver. Internally, the drive cage is made entirely of steel. Air is blown onto the drives by a 2 ball-bearing 80mm fan running at 1200 RPM. The perforated front air intake is detachable without dissembling the cage, it lets you clean the dust-filter and the fan. Its pricing and availability are not known.
Source: VR-Zone
Source: VR-Zone
User comments
That looks more like and internal toaster for me, despite that 80mm fan. There is hardly any gap between the drives.
Dual low noise fans and loose the front logo please.
I don't understand the point of some hdd clooign cages for desktop case because most towers already have front intake fans for the hdd's
This in a Lancool PC-K58 case with a taken out HDD cage = win.
I have one of these from like 8 years ago - not a new idea methinks. and bump on the toast your drives thing - far too close together...
Aren't hard drives supposed to run warm to function properly?
by: hatI think I read somewhere that the ideal temps for HDs are around 40 degrees Celsius. And yes, a HD that runs too cold is more likely to fail and has a shorter lifespan. This is why I don't understand people who watercool their hard drives.
Aren't hard drives supposed to run warm to function properly?
However, if you have many harddrives so close together, some airflow is good, because it gets very hot very quickly. And in this thing, the gap is so narrow, that 80mm fan will only have a marginal cooling effect.
shame its an 80mm fan,
by: FreedomEclipseI don't mind that as much as this:
shame its an 80mm fan,
1200 RPM
unnecessarily high RPM
by: Kaleidthats my point - it should by 120mm@1200rpm
I don't mind that as much as this:
1200 RPM
unnecessarily high RPM
yea i'd personally never buy something like this cause i only roll with 1 hd, but besides that as others stated i too have read that HDD's are more likely to fail at low temps and if they don't they still perform more poorly than without cooling. Watercooling a drive? maybe SSD but those put out much heat?
Use one here but made by iStar and basically the same. 3 HDD is a no no even if the fan could do 5000RPM lol..
The fronts pretty much the same with same ideas how the filter fit on it and i took the whole front part of mine so i could just use the cases filters.
http://www.newegg.com/Product/Product.aspx?Item=N82E16856999209&cm_re=istar-_-56-999-209-_-Product
Then it would have to take 3 5 1/4 bays ;).
The fronts pretty much the same with same ideas how the filter fit on it and i took the whole front part of mine so i could just use the cases filters.
http://www.newegg.com/Product/Product.aspx?Item=N82E16856999209&cm_re=istar-_-56-999-209-_-Product
by: FreedomEclipse
shame its an 80mm fan,
Then it would have to take 3 5 1/4 bays ;).
it's cool but better if there is cage take more HDD with 12cm fan
i'm surprised you people didn't mention the IBM Deathstar drives in the pictures.
by: FreedomEclipseOverkill. That is enough for highly overclocked CPU's and GPU's.
thats my point - it should by 120mm@1200rpm
by: breakfromyouAh, the famous ones for dying?
i'm surprised you people didn't mention the IBM Deathstar drives in the pictures.
Looks realy funny in 2009, all hdds on IDE.
by: MRCL
That looks more like and internal toaster for me, despite that 80mm fan. There is hardly any gap between the drives.
i've used many that use 120mm fans and pack the drives extremely close, the air blowing over the sides cools them exceptionally well.
hard drives only produce 5-15W of heat, so they only need minimal cooling
lol to IBM deathstars... I've got a hitachi one around here and its terrible (slow, noisy, hot)
edit: actually they're very honest, the name of the last Jpeg gives away the temps of those deathstars :D
by: Kaleidnot really - Its really more about the sound, 80mm's tend to create quite a racket at higher RPM, Im not saying that 120mm dont do the same but they are less noiser at the same RPM
Overkill. That is enough for highly overclocked CPU's and GPU's.
I have the 2 standard hard drive caddys which come with my Antec 902 - they are both 120mm & have a RPM controller which I can use to crank up the fan but it gets noisey as hell so i just leave it on the lowest setting. which is around 800rpm i think, Ive no idea what it is
by: MusselsLOL that would be enough to cook an egg.
edit: actually they're very honest, the name of the last Jpeg gives away the temps of those deathstars :D
I'm not too worried about the drives and fan - could just use 2 drives, or 3 slim drives.
But I do perfer like my Lian-Li EX-H34B. 3.5" x 4 in 5.25" x 3 with a rear 120mm fan. There's nearly a 1/4" between the drives, and the rear fan doubles as my CPU/RAM cooler.
But I do perfer like my Lian-Li EX-H34B. 3.5" x 4 in 5.25" x 3 with a rear 120mm fan. There's nearly a 1/4" between the drives, and the rear fan doubles as my CPU/RAM cooler.