Still no CODWAW Crossfire fixes. :cry: No fix for flashing in Battlefield Bad Company 2 Beta. :cry: Oh well. So where do we download the new gaming profile .exe's? Are they included in the driver?

Anyone see if this fixed their gray stripe lockups? I'm at work now and I'm eager to try these. I hope they fixed the issue where my 5970 does not go to sleep (screen goes black but monitor does not go to standby).

by: t_ski

---

Anyone see if this fixed their gray stripe lockups? I'm at work now and I'm eager to try these. I hope they fixed the issue where my 5970 does not go to sleep (screen goes black but monitor does not go to standby).

---

Mine does the same thing. Hoping to fix teh issue as well.

+1 fps in GPU test 2 9.10 vs 10.2 why 9.10? - latest normal forcing AF driver (yep im Dragon Age fan) E8500 (4333mhz) Radeon4870 (820/1030)

by: t_ski

---

Anyone see if this fixed their gray stripe lockups? I'm at work now and I'm eager to try these.

---

IIRC, AMD fixed that with 10.1 hotfix. So this should include it.

Has anyone bothered to download the ATI CrossFireX Application Profiles. That is a separate download.

I cant access CCC now with these drivers. says currently active card is not supported. If I disable my gtx260 I can use the CCC but only when its disabled. is ati cockblocking physx now?

So it doesn't fix the problems with Palit/XpertVision...

working fine here

by: sapetto

---

So it doesn't fix the problems with Palit/XpertVision...

---

its working fine for me, I couldn't use 10.1 tho

by: ShRoOmAlIsTiC

---

I cant access CCC now with these drivers. says currently active card is not supported. If I disable my gtx260 I can use the CCC but only when its disabled. is ati cockblocking physx now?

---

Gah, hopefully we won't have to wait for another hack/patch. Have you tried redoing the patch?

Do they have a list for what's inside the "Application Profile" ?

by: erocker

---

Gah, hopefully we won't have to wait for another hack/patch. Have you tried redoing the patch?

---

physx still works and CCC still takes the changes after I re-enable the nvidia card. Just more of a hassel then anything. I havent tried the patch again. Probly gonna need an ati patch now.

by: t_ski

---

Anyone see if this fixed their gray stripe lockups? I

---

Lol from the release notes:

Intermittent grey screen or vertical line corruption may randomly appear on the screen

:slap:

by far the best working CCC to date for my gpu. Thank's Tpu for putting the release up on the home page. And thank you ATI for a great but still flawed driver. I cant wait to see how the 10.3's work for my 5970 :pimp:

I wonder if They will have a Legacy set soon as it has been 3 months since the last set. (They work fine for me Other than Cat 7.7-7.9 at the time but users of X2K and higher Hardware may want them)

Ugh... i cant install this drivers, everything seems to work fine then at the very end i get a ? that says there were errors and that i should open the Report, everything has a success but the ATI Display Driver: ATI Display Driver Final Status: Fail Version of Item: 8.702.0.0000 Size: 90 Mbytes Anyone else with this problem, i tried jumping from 9-11 to 10-2, also tried cleaning everything and then installing just the 10-2, same problem. Win 7 and HD 5870 Thanks

System Restore everything, remove the drivers like you would normally without using any cleaning utilities, them remove the ATI folder out of the Programs. Then try to install drivers. This is what Wile E has been doing and it has worked fine for him some time now. Also delete the drivers you have just downloaded and get them again from AMD site. Disable any Overclocking programs while you are at it. If you have any more troubles see us or Make a Catalyst Feedback report and perhaps make a report about it on the AMD forums, in a professional manner.

by: eidairaman1

---

System Restore everything, remove the drivers like you would normally without using any cleaning utilities, them remove the ATI folder out of the Programs. Then try to install drivers. This is what Wile E has been doing and it has worked fine for him some time now. Also delete the drivers you have just downloaded and get them again from AMD site. Disable any Overclocking programs while you are at it. If you have any more troubles see us or Make a Catalyst Feedback report and perhaps make a report about it on the AMD forums, in a professional manner.

---

Thanks for your help but it was a no go, tried cleaning everything etc and i keep getting the same results, FAIL. It might be because i have Eyefinity or because i have a 4870 in my second PCI e to feed a 4th monitor, these drivers might not be prepared for that. 10.1 seem to work fine though.

LAME! pissed off about that crossfire application thing, i thought it was meant to be user customizable?

by: eidairaman1

---

I wonder if They will have a Legacy set soon as it has been 3 months since the last set. (They work fine for me Other than Cat 7.7-7.9 at the time but users of X2K and higher Hardware may want them)

---

You do know I hope that all they did with the Legacy release was re-package the 9.3's with a new installer so that they would install correctly under Vista/Win7 right?

So what you saying is for instance if I am playing Left 4 Dead 2, this ATI utility will auto enable the CrossfireX profile for that particular game? What’s this suppose to do, increase performance in CrossfireX setups? If so, good for ATI/AMD. Finally they are doing something right(er) :D

In testing stages of 7 they did, but they release driver sets every 3 months now. Only diff between AGP and PCI E sets is the way the units access Direct X, the Issue was Discovered back in 2007 with Cat 7.7s-7.9s. I had grabbed 8.1s at the time and they worked like a charm then 8.5s etc im up to 9.11s but we should see 10.2s

by: nt300

---

So what you saying is for instance if I am playing Left 4 Dead 2, this ATI utility will auto enable the CrossfireX profile for that particular game? What’s this suppose to do, increase performance in CrossfireX setups? If so, good for ATI/AMD. Finally they are doing something right(er) :D

---

its just an update. when ATI release drivers, they're already a month or two old - meaning crossfire doesnt work on the latest games out. Install this, and you get next months crossfire profiles, this month.

by: Mussels

---

LAME! pissed off about that crossfire application thing, i thought it was meant to be user customizable?

---

I never got the entire "user customized" thing with the NVIDIA drivers except that they could get you into some serious do-do if you did not know what you were doing. It's what makes troubleshooting various SLI issues an absolute nightmare when some n00b reads a bunch of settings that worked for one guy, gets them locked in, then hoses his game where they then go QQ on a forum that it's the game's fault for not working right. :twitch: Not that I'm saying that happens here I just find that the more widgets you give to someone to play with, sooner or later, they'll wind up in a bigger mess than is possible to repair. My only real concern is the speed of the profile updates and not supporting some games for whatever reason.