Thursday, May 6th 2010

Galaxy GTX 470 GC Version Graphics Card Unveiled

Galaxy is ready with its 100% non-reference design graphics card based on the NVIDIA GeForce GTX 470 GPU, the Galaxy GTX 470 GC Version. The card makes use of Galaxy engineering with both the PCB and cooler designs. The card features a blue PCB, which is 0.5 inch shorter than the reference design (at 9 inches), and pushes the two 6-pin power connectors to the rear-end of the card. The cooling assembly uses a large aluminum fin array cooling all vital parts, covered with a silvery plastic found on action figures. Galaxy innovated a little with the fan, which can be partly detached from the rest of the cooler to help clean it and the heatsink under it.

The card is overclocked out of the box, with speeds of 625 MHz / 1250 MHz / 837 or 3348 MHz (effective), for the core, shader, and memory, respectively. Like every other GTX 470 based card, it is DirectX 11 compliant, and has 448 CUDA cores, 1280 MB of GDDR5 memory across a 320-bit wide interface, and is 2/3/4-way SLI capable. Display connectivity includes two DVI-D, and HDMI with integrated audio. A test by the source shows that with this cooling solution, the GTX 470 GC Version manages to keep the GPU at around 88 degrees Celsius with Furmark load. It is expected that the card will be available in the US as early as by tomorrow.
Source: VR-Zone
Add your own comment

51 Comments on Galaxy GTX 470 GC Version Graphics Card Unveiled

#2
shevanel
would look good on a gigabyte board
Posted on Reply
#3
Roph
I was going to say, that looked like a toy.

I almost expected to see a mighty max underneath the fan lid thing.
Posted on Reply
#4
xrealm20
nice how the heatsink is easly cleaned --

Not too bad looking either.
Posted on Reply
#5
caleb
Looks like a pretty decent cooler. It doesnt waste any space it occupies not like most of gfx collers nowdays.
Posted on Reply
#6
entropy13
RophI was going to say, that looked like a toy.

I almost expected to see a mighty max underneath the fan lid thing.
Agreed. The gray made it look more so.
Posted on Reply
#7
Arrakis9
the shroud design reminds me of halo
Posted on Reply
#8
entropy13
Arrakis+9the shroud design reminds me of halo
Reminds me more of the gray rubber parts in Gundam model kits. :p
Posted on Reply
#9
RejZoR
If you're a Star Wars freak, this is the artifact for you! Or if you're building a Death Star themed PC case :D
Posted on Reply
#10
OnBoard
RophI was going to say, that looked like a toy.

I almost expected to see a mighty max underneath the fan lid thing.
entropy13Reminds me more of the gray rubber parts in Gundam model kits. :p
RejZoRIf you're a Star Wars freak, this is the artifact for you! Or if you're building a Death Star themed PC case :D
I think they did that on purpose, to look like all those plastic glue-it-together kits, airplanes, starships and what not.

The fan hinge goes together with it, like s space ship hatch opening :) Don't know if I like it, but it's different that's for sure!

But the cooler under looks like it means business, so you could just rip the top part of (and give it to your kid, if you have one to play around) and put a proper fan on top of it.

Dad gets a toy, kid get a toy, fun for whole family! :laugh:
Posted on Reply
#11
Mescalamba
I find that kinda nice, and can imagine few ways to easy mod it to other colors and looks. Plus, if it cools that good as it looks, hell, than it should be great.

Btw. anyone else think about getting some damaged Vapor-X graphic card and use that cooler on GTX 470/480? :D
Posted on Reply
#12
OnBoard
MescalambaBtw. anyone else think about getting some damaged Vapor-X graphic card and use that cooler on GTX 470/480? :D
Surely the hole spacing isn't the same?
shevanelwould look good on a gigabyte board
Now I kinda want this thing as GTX 465. It's growing on me and already have the blue motherboard :)
Posted on Reply
#13
pjladyfox
Okay, now THAT is a really nifty idea for a video card HSF. If a company made aftermarket coolers with that feature built-in I'd overcome my nervousness of replacing one in a moment. Heck, they could even go one step further and make different color modular covers to allow users to coordinate their interiors.
Posted on Reply
#14
EastCoasthandle
I don't see how a brush is going to remove all the dust. A can of air would be better IMO. Unless the intent is to remove the top layer of dust.
Posted on Reply
#15
erixx
NICEEEEEEEEEEEEEEEEEEEEE

sorry I mean : SEXYYYYYYYYYYYYYYYYYYYYYY

No really, seems as if form and function make sense sometimes! Clever and beautiful in other words, or as the poet said: NICEEEEEEEEEEE AND SEXYYYYYYYYYYYYYYYYYYYY HAHA
Posted on Reply
#16
Breathless
EastCoasthandleI don't see how a brush is going to remove all the dust. A can of air would be better IMO. Unless the intent is to remove the top layer of dust.
The brush is for basting, because you could barbecue on cow on these things :rockout:
Posted on Reply
#17
(FIH) The Don
that is one of THE MOST UGLY gfx i have EVER seen :shadedshu
Posted on Reply
#18
OnBoard
EastCoasthandleI don't see how a brush is going to remove all the dust. A can of air would be better IMO. Unless the intent is to remove the top layer of dust.
It's easier to get a close-up pictures of. Put canned air there and all you'd see was a red straw :) But the fins entrance is the area that could get blocked and a brush will fix that. As long as there is air flowing through, even if fins are dusty it still cools.
Posted on Reply
#19
xaira
What About The Dust That Gets Further In?
Posted on Reply
#20
erixx
yep, i can tell you, after 2 years or so i removed the cover of my 9600's and know what? the dust was not in the visible close to the fan area, but there was a heavy WALL of dust at the very end of the cooling fins.....
Posted on Reply
#21
HalfAHertz
I guess beauty is in the eye of the beholder...
Posted on Reply
#22
arnoo1
(FIH) The Donthat is one of THE MOST UGLY gfx i have EVER seen :shadedshu
damn right mate

and still to hot
and galaxy is crap
evga/sus/gigabyte/xfx ftw
Posted on Reply
#23
erixx
sus? (what is that?)
gigabyte?

crap!

lol

point of view ftw
Posted on Reply
#24
arnoo1
whahah point of view lol
that company has the most rma's
xd i saw once an rma statistic of all brands (ati/nvidia)

lol and sus must be asus xd my stupid keyboard(I hate INSERT key)
Posted on Reply
#25
roast
arnoo1i saw once an rma statistic of all brands (ati/nvidia)
Link? I cant imagine PoV would have any more RMA's than any other nVidia partner...

On-topic... that shroud is FUGLY! It really does look like a Mighty Max toy. I generally like blue PCBs, but for some reason, I just dont think the color scheme is great. However, ingenious design for cleaning the HS, and good to see some non-reference designs being released for Fermi.... wonder how the temps would be for this...?
Posted on Reply
Add your own comment
Apr 18th, 2024 08:36 EDT change timezone

New Forum Posts

Popular Reviews

Controversial News Posts