Friday, October 21st 2011
EVGA SR3 Super Record 3 Motherboard Pictured
Just as its detractors thought they were done with it, and just as people started to think that attrition among some of its "popular" designers cost EVGA dearly, the company hit back with teaser pictures of the Super Record 3 or SR3, it promised back in June, it would deliver to the enthusiast community. And yes, it matches its description! The SR3 is a dual socket LGA2011 2P enthusiast desktop/workstation motherboard in the E-ATX form factor. Socket 0 is wired to eight DDR3 DIMM slots (two DIMMs/channel), while socket 1 to four slots (1 DIMM/channel).
In LGA2011 2P systems, the processor sitting on socket 0 is wired to the PCH (SR3 looks to have Patsburg-T), while the processor on socket 1 is wired to the one on socket 0 using two QPI links, closing the daisy-chain. Socket 0, apart from its 4 GB/s DMI link, has a PCI-Express 2.0 x4 (another 4 GB/s) link to supplement the DMI link, so the storage controllers don't get bottlenecked with just DMI. Both processors contribute to the PCI-Express lane budget of the motherboard. There are seven PCI-Express x16 slots, among which four are PCI-Express 3.0 x16 capable, every slot is PCI-Express 3.0 x8 capable. NVIDIA 4-way SLI is supported. This board will support Sandy Bridge-EP Xeon processors, though we don't know at this juncture if Core i7 Sandy Bridge-E is 2P capable.
The CPU sockets are each powered by a 6+1 phase digital PWM circuit driven by CPL+Volterra components, the memory is powered by 8-phase (1 phase per channel) digital PWM. Apart from the 24-pin ATX connector, power is drawn in by two 8-pin EPS connectors (one per socket), and three 6-pin PCIe connectors (one per socket, and one for PCIe slot electrical stability). Each PCIe slot can be individually toggled (disabled/enabled), by gating its power lane using DIP switches on the board. There are consolidated voltage measurement points, and one can expect the UEFI firmware to pack every option an overclocker could possibly tinker with.
In terms of storage connectivity, there are as many as 14 SATA ports (data rates aren't known yet), and a couple of eSATA ports. General connectivity includes 8+2 channel HD audio, two gigabit Ethernet connections, USB 3.0, Bluetooth, and EVBot support (the gadget could even come bundled). There's no word on the availability, but one thing for sure is that EVGA is ready to dominate LGA2011 enthusiast board market.
Source:
EVGA
In LGA2011 2P systems, the processor sitting on socket 0 is wired to the PCH (SR3 looks to have Patsburg-T), while the processor on socket 1 is wired to the one on socket 0 using two QPI links, closing the daisy-chain. Socket 0, apart from its 4 GB/s DMI link, has a PCI-Express 2.0 x4 (another 4 GB/s) link to supplement the DMI link, so the storage controllers don't get bottlenecked with just DMI. Both processors contribute to the PCI-Express lane budget of the motherboard. There are seven PCI-Express x16 slots, among which four are PCI-Express 3.0 x16 capable, every slot is PCI-Express 3.0 x8 capable. NVIDIA 4-way SLI is supported. This board will support Sandy Bridge-EP Xeon processors, though we don't know at this juncture if Core i7 Sandy Bridge-E is 2P capable.
In terms of storage connectivity, there are as many as 14 SATA ports (data rates aren't known yet), and a couple of eSATA ports. General connectivity includes 8+2 channel HD audio, two gigabit Ethernet connections, USB 3.0, Bluetooth, and EVBot support (the gadget could even come bundled). There's no word on the availability, but one thing for sure is that EVGA is ready to dominate LGA2011 enthusiast board market.
62 Comments on EVGA SR3 Super Record 3 Motherboard Pictured
I am not saying its not a practical idea, i am just saying i don't see you being able to OC that CPU. How do you know how much power each of those VRms can push? From what i remember volterra PWMs use special coiltronics inductors made for volterra, allowing upto 40-50A per phase with the Volterra power stages each outputting 40-45. 6+1 is enough to run the Xeons, that is actually above the spec for them in the VRD12 spec found here:
wenku.baidu.com/view/1fb00667f5335a8102d220a5.html , but the difference in memory slots make it more puzzling, so maybe we will see on release, what that board is all about. Would be sick if you can OC the LGA2011 Xeons, and have two of them, that would be great.
if anything that board would be great for the memory OC part of SB-E, but the difference in the memory slots is just weird.
but looks to me that the second CPU might be different than the first. Maybe they found a way to put an OCing SB-E with a Xeon.
The 2670 is a bit pricey especially for 2x $1684, there is more power for less money with other methods.
$3300 for 16/32cores is pathetic.
www.aztekcomputers.com/CM8062101082713-INTEL-2486010.html
www.cpu-world.com/CPUs/Xeon/Intel-Xeon%20E5-2690.html
What would be a good xeon e5 for this board seeing 2x 130w/150w is not the best choice for overclock ?
Whats the deal with 1 DIMM per channel for the second socket?
If its a space thing I'm sure the enthusiasts who buy this board aren't gonna mind spending a bit more for a case than hold a SSI-EEB/CEB XL-ATX.
Nicely spaced too! Leaves a pair of x16 (at x8) for PCIe SSDs. Or an SSD and one of those SAS 12Gb controllers for several terabytes of storage.