Thursday, March 1st 2012

ASRock Readies a Pair of Z77 Fatal1ty Motherboards

ASRock is working on not one, but two motherboard models based on the Intel Z77 chipset, under its Fatal1ty Professional series. The first of the lot is a standard-ATX Z77 Fatal1ty Professional, followed by the micro-ATX Z77 Fatal1ty Professional-M. The latter is ASRock's first micro-ATX Fatal1ty motherboard. The ATX Z77 Fatal1ty Professional could go on to be ASRock's flagship Z77 motherboard. The LGA1155 socket is powered by a 20+ phase digital-PWM power circuitry, and memory by a 5-phase VRM, which make this board as much an overclockers' choice as gamers'.

Expansion slots include two each of PCI-Express 3.0 x16 (x8/x8 when both populated), PCIe 2.0 x1, and legacy PCI; and one PCI-Express 2.0 x16 (electrical x4, wired to the PCH). There are plenty of SATA ports, including six SATA 6 Gb/s (two from the PCH, four from additional controllers), four internal SATA 3 Gb/s, and eSATA. ASRock seems to have deployed a PCIe bridge chip to yield more PCIe lanes. USB 3.0 connectivity includes two ports via front-panel header, and possibly four ports (if not more) on the rear-panel. Since users of this board will almost certainly be using discrete graphics, display connectivity is reduced to smaller ports (such as HDMI or DisplayPort).

The Z77 Fatal1ty Professional-M, on the other hand, has a compacted layout. The CPU is powered by a simpler 11-phase VRM, and memory with 2+1 phase. Expansion slots include two PCI-Express 3.0 x16 (x8/x8 when both populated), one PCI-Express 2.0 x16 (electrical x4), and a PCIe x1. SATA connectivity includes four each of SATA 6 Gb/s, SATA 3 Gb/s, and eSATA 6 Gb/s. It doesn't look like the board is using any third-party USB 3.0 controllers, and instead relying on the four ports the Z77 PCH provides (two via front-panel header, two on the rear-panel). Display connectivity on this board includes DVI and D-Sub, apart from HDMI (probably).

Both models feature ASRock-exclusives such as XFastUSB (higher bandwidth, polling rate), XFastLAN (lower latencies), XFastRAM (quicker troubleshooting of stubborn RAM), and graphics technologies such as NVIDIA SLI, AMD CrossFire, and Lucid VirtuMVP. The two are expected to be a part of the first wave of Z77 motherboards. The two will be shown to the public at CeBIT.Sources: PCReport Korea, VR-Zone
Add your own comment

8 Comments on ASRock Readies a Pair of Z77 Fatal1ty Motherboards

#1
AlienIsGOD
the M-ATX board si looking mighty sweet :D crossfire action :D :D
Posted on Reply
#2
cavemanthreeonesix
It looks like there are 8 sata connectors in the pic not 6 on the matx, difficult to tell though
Posted on Reply
#3
jalex3
They seem nice. Wish the bios was not all red. It hurts my eyes :o.
Posted on Reply
#4
[H]@RD5TUFF
Oh joy, more looser branded stuff that would otherwise have been appealing to a far larger majority.
Posted on Reply
#5
FreedomEclipse
Crazy Dogmatic Bullsh!t!
Mmmm 20+ power phases...

Posted on Reply
#6
TurdFergasun
i would pay extra not to have failure pile branding sharted all over my mobo.
Posted on Reply
#7
Xiphos
I wish companies would drop that Fatal1ty brand.
Posted on Reply
#8
Anusha
by: btarunr
XFastRAM (quicker troubleshooting of stubborn RAM),
i don't know where you (or they) caught phrase this from,
but XFastRAM on my Z68 board means ability to setup a RAM drive without needing a 3rd party app.
Posted on Reply