Friday, October 19th 2012

EK Releases the EK-RES X3 Series Tube Reservoirs

EK Water Blocks, Ljubljana based premium performance PC water cooling gear manufacturer, is proud to present the latest revision of EK-RES X3 series reservoirs. There are four different versions avaiable: EK-RES X3 110, -150, -250 and -400.

The EK-RES X3 reservoir from EK CSQ design line is an improved version of renown EK-Multioption RES X2 reservoirs released three years ago. Compared to EK-Multioption RES X2 product line the EK-RES X3 reservoirs featire improved inlet/outlet port configuration for easier and more straightforward fitting configuration and tube routing. Improvements have been made on the reservoir's bottom terminal which has been optimized for best flow. Vortex ouccurance has also been diminished by the use of enclosed anti-cyclone as well as additional PE foam.

All these new features result in easier-than-ever mounting, filling and quickest bleeding of air.

Reservoir is manufactured of premium quality 60 mm acrylic tube and POM Acetal end caps. The sealing is performed by quality EPDM rubber washers.

New EK-RES X3 series reservoir comes with a pair of EK design reservoir holders using adjustable fastening force controlled by enclosed Allen key.

Technical data:

- Installation height: from 110- to 400 mm (depending on the model)
- Diameter: 60 mm
- Capacity: from ~150- to ~820 mL (depending on the model)
- Weight (netto): from ~225g to 525g (depending on the model)

Enclosed within delivery:

- EK-RES X3 series reservoir
- Pair of EK reservoir holders with mounting screws
- 3 x G1/4 extenders
- 3 x G1/4 Plugs
- 1 x 6 mm Allen key for plugs
- 1 x 2,5 mm allen key for reservoir holders
- 1 x polyether anti-cyclon foam

The EK-RES X3 series reservoirs are readily available for purchase through EK Webshop and our Partner Reseller Network. More add-ons (such as multi-port top end caps) will be available for purchase in the upcoming month.
Add your own comment

7 Comments on EK Releases the EK-RES X3 Series Tube Reservoirs

Velvet Wafer
yeah, of course we will have to wait for the caps...:rolleyes:..hopefully, if the threading on them is the same as on the older EK, maybe it would be a good upgrade for the nasty top on my ek res ;)
Posted on Reply
improved inlet/outlet
yeah great improvement... :laugh:
we can't use the top port as inlet anymore.. (only fillport)
and the price is higher
Posted on Reply
Velvet Wafer
by: theoneandonlymrk
get a used laing for a good price or a phobya 600 if you cant find a laing;)

TT pump is weak as fuck :D
Posted on Reply
by: Velvet Wafer
get a used laing for a good price or a phobya 600 if you cant find a laing

TT pump is weak as fuck
Ty, it is i had to use the tap to get it going , (submerged res untill all air was out via high pressure tap) and its struggling still , very low flowrate :shadedshu
Posted on Reply
No circles? Not buying.
Posted on Reply
Well, the whole freaking thing is a huge circle :D
Posted on Reply