Arctic Cooling Enhances the Arctic RC with Turbo Module

Thursday, June 26th 2008

The Swiss low noise cooling solution provider Arctic Cooling launched their latest RAM cooler Arctic RC earlier, providing a revolutionary RAM cooling solution for enthusiasts. To reinforce the cooling capacity of the ARCTIC RC, the company today launched the RC Turbo Module, a dual-fan cooler that reduces the RAM temperature even further.

Same as other ARCTIC COOLING products, the RC Turbo Module’s dual 56mm fans are installed with low noise impeller. As a result, the fans are extremely quiet which generate only 0.1 Sone of noise even spinning at full load. Gamers can enjoy the both, the coolness and quietness brought by this RAM fan cooler. The RC Turbo Module is suitable for one to four RAMs with two pieces of ARCTIC RC attached to it. The RC Turbo Module offers a 6-year limited warranty. It will be available in July 2008. The MSRP is US$13.95 and 8.95€ (excl VAT).

Source: Arctic Cooling

posted by btarunr - 10:18 AM | Related News |

User comments

by Cold Storm (11:03 AM) - Reply

That looks pretty neat. I'll have to see what the review state on this one! Maybe my next ram cooler. :rockout:

by btarunr (11:27 AM) - Reply

Here's what it's all about : AC sells the Arctic RC RAM-sinks:

You install these over each of your bare modules. Then use this Turbo Module over it (like the Corsair Dominator block). This kit is way more silent than the Dominator block if you were to go by AC's claims.

by Cold Storm (11:31 AM) - Reply

Thanks for showing us that Bta. I'll have to wait on this product... I'll wait and see if Nflesher, or T_ski can get this for review before I ever think about grabbing it. Because some ram, like my Tracers, have the dang heat spreader just glued to it! Dang them!

by Gallatin (12:35 PM) - Reply

Because some ram, like my Tracers, have the dang heat spreader just glued to it! Dang them!

that go for all tracers? i know there is two versions.

by Cold Storm (12:44 PM) - Reply

by: Gallatin
that go for all tracers? i know there is two versions.

If there is a clip on the heatspreader then you can take it off...I have two different kinds of the Ballistix Tracers. The 1st gen with the heat spreader that you can take off, and the 2nd gen where its no way you can take one off unless taking a chip with it.. It just all depends on the if there is two metal clips on the heat spreader...

by Gallatin (1:02 PM) - Reply

that is what i want to know. thank you. i have those [IMG]http://images.crucial.com/images/resources/large/package/BallistixTracer240-pinDIMM(withLEDs)kit_2.gif[/IMG] not those

by Cold Storm (1:27 PM) - Reply

Yeah, the top ones are the first gen, the second one can be ether 2nd or 3rd. 3rd gen are the ones with just one line of data lights.. I don't think you could use the AC ramsinks on the 2nd and 3rd gen.

by PVTCaboose1337 (1:33 PM) - Reply

I like the look of this ram cooler, but my AF64pro blocks access to 2 ram slots.

by AsRock (1:54 PM) - Reply

looks pretty cool, will have to keep a eye open for this. As for those ram coolers i could put them on my G.Skill just wondering if it be worth it.

by Cold Storm (1:58 PM) - Reply

by: PVTCaboose1337
I like the look of this ram cooler, but my AF64pro blocks access to 2 ram slots.

I know that feeling.. my Xig takes up so much room! The OCZ Ram cooler is good since I can just slide it right onto the clamps..

by mab1376 (8:57 PM) - Reply

it looks tall enough to work with the OCZ reaper or AXEram 1200MHz kit. :)

by WarEagleAU (10:38 PM) - Reply

yeah with the xig, I could use the far two open ram slots with these heatsinks and all the way probably for the cooler. I just dont know if its worth getting this. Do ram coolers really work? Price is very nice though.

by panchoman (10:43 PM) - Reply

preety sick cooler, wonder how it'll perform compared to the corsair ram coolers that everyone loves so much.

by Cold Storm (11:15 PM) - Reply

by: WarEagleAU
yeah with the xig, I could use the far two open ram slots with these heatsinks and all the way probably for the cooler. I just dont know if its worth getting this. Do ram coolers really work? Price is very nice though.

With my Tracers, the ram cooler is a good thing to buy.. I don't have to worry about them getting hot anymore.. I mean, I got a these tracers sitting at a good temp. With the OCZ cooler the Xig cooler doesn't hurt me at all. I still have all the ram covered.. Even with a 38mm fan hooked up to it.. Pancho: I really haven't seen people on TPU with the Corsair cooler... I see more people with the OCZ ram cooler then that one...

by MKmods (11:36 PM) - Reply

very nice post btarunr, it is about time someone makes a good cooler for memory. No silly perforations to restrict flow, BIGGER fans mounted on rubber suspension to reduce vibration.

by Duffman (11:45 PM) - Reply

too bad i already have the Corsair kit. It does work very well. This should also. The corsair dominator fans don't make much noise. These are probably silent. I know the fans on my AC Accelero Extreme are near silent.

by niko084 (11:55 PM) - Reply

by: btarunr
Here's what it's all about : AC sells the Arctic RC RAM-sinks: You install these over each of your bare modules. Then use this Turbo Module over it (like the Corsair Dominator block). This kit is way more silent than the Dominator block if you were to go by AC's claims.

Those look like better sinks, but I have the dominator fan block on my ram and its dead silent, the fans are too small to make noise... :laugh: But for sure those sinks look nice, might have to get some, lucky for me I have a 120mm fan right next to my ram blowing straight across it :)

by MKmods (11:59 PM) - Reply

by: Duffman
too bad i already have the Corsair kit. It does work very well. This should also. The corsair dominator fans don't make much noise. These are probably silent. I know the fans on my AC Accelero Extreme are near silent.

The Corsair is also a good kit, I think its the OCZ one that has the little holes (restricts about 60% of the air)

by niko084 (12:00 AM) - Reply

by: MKmods
The Corsair is also a good kit, I think its the OCZ one that has the little holes (restricts about 60% of the air)

Ya but they also make the water cooling kits :cool:

by MKmods (12:19 AM) - Reply

by: niko084
Ya but they also make the water cooling kits :cool:

I have nothing against water cooling kits (sometimes I use H20 myself) BUT the amount of people using H20 to cool memory is like .0001%, the AC kit would work for probably 98% of the world and be affordable as well.

by niko084 (12:37 AM) - Reply

by: MKmods
I have nothing against water cooling kits (sometimes I use H20 myself) BUT the amount of people using H20 to cool memory is like .0001%, the AC kit would work for probably 98% of the world and be affordable as well.

Ya I agree cooling ram with water is next to pointless for almost everyone. I just had to throw out that ocz makes those kits.

by MKmods (1:02 AM) - Reply

I wouldnt say pointless (it looks cool) and if done right probably works good too. As you get older "Value" becomes more important so getting the best product for the money matters a lot. Thats one thing about AC stuff, you usually get your monies worth.

by btarunr (1:17 AM) - Reply

Best part of Arctic Cooling is that all their stuff is extremely affordable. I mean all it takes is ~$25 in all to drop your DDR3 1600 kit's temperature from 70 to 37 C, something only water cooling is expected to deliver.

by MKmods (1:26 AM) - Reply

I posted this in the Bad Boys modding thread but its a good place to fine odd ball AC parts http://stores.ebay.com/Arctic-Cooling-RMA-parts_W0QQcolZ4QQdirZ1QQfsubZQ2d33QQftidZ2QQtZkm (shipping is not the best deal but its a cool resource for parts)

by Kursah (1:44 AM) - Reply

That may be the replacement for my Corsair Airflow memory cooler, which many scoff at, but does actually work, and quite well from my findings...those 3 little fans push a pretty decent ammount of air and do a great job with their design...I just don't like most 2-fan solutions due to their "flimsy-ness" appearance...nothing can top the "tough as a brick" design of the Corsair, but AC makes good products...we'll just have to see. I may have to dig up a link where I had a temp diode mounted between my memory and it's heatsink with before and no memory cooler and Corsair Airflow...the difference was pretty damn good in a case that had barely decent airflow to my Antec 900. Memory coolers are a great investment no matter what you choose. :toast:

Post your own comment

Username:
Password:
Register Here!