Tuesday, June 16th 2009

Sapphire Intros Radeon HD 4730 Accelerator

Sapphire today announced its Radeon HD 4730 accelerator. The new GPU surfaced along with Radeon HD 4790. Together these GPUs fill the Radeon HD 4700 series, bringing relief to the demand Radeon HD 4770 created, but is apparently unable to meet due to technical problems with the 40 nm manufacturing node of foundry partner TSMC.

The Sapphire Radeon HD 4730 uses a PCB that is pin-compatible with Radeon HD 4870, as it is based on the same RV770 core with a different configuration. The company used a simple cooler with radially-projecting aluminum fins, which it has been using on inexpensive models of the Radeon HD 4850, and HD 4830. The memory is subjected to its air-flow, while the VRM area has a heatsink of its own. The GPU has 640 stream processors enabled, with a 128-bit wide GDDR5 memory interface, holding 512 MB of memory. Sapphire cut down on the number of memory chips used, thanks to the narrower memory bus, while maintaining the memory bandwidth of similarly clocked 256-bit GDDR3. The core is clocked at 750 MHz, while the memory is at 900 MHz (3.6 GT/s effective). The outputs provided on the card are DVI-D, D-Sub, and HDMI. The card takes its power input from two 6-pin power connectors. The card uses a 3+2 phase power circuit. The Sapphire HD 4730 is expected to be priced at 80€.

Source: Expreview
Add your own comment

26 Comments on Sapphire Intros Radeon HD 4730 Accelerator

#1
CH@NO
so this card is a HD 4830 in a HD 4870 PCB????

The only diff. is it only have the 750MHz core instead of 625MHz??, and the penalty for this is that the card needs 2xPCI-E connectors...

I think this card will be a piece of JUNK, well, hope TPU make a review of it and see if It's worth it...
Posted on Reply