GeForce GTX 285 Voltmods
Author: W1zzard
Date: 2009-03-12 14:48:25

GPU Voltage Mod (soldering)



  1. Remove the little 0 Ohm resistor before soldering on the wires.
  2. Solder wires.
  3. Make sure the trimmer is set to 0 Ohms of resistance between the pads where the 0 Ohm resistor was.
  4. Slowly turn up the resistance to increase the voltage.
A pencil VDDC mod is not available at this time.

GPU Overvoltage Protection Mod (soldering)

Page:
Discuss this article in our forums