Winflash 2.0.0.7

[2.0.0.7]

- fixed pak option to have popup error when infile is missing
- add option (excl_memtrain_dtable) to keep memory training information while flashing new bios
- add partial check for -pavbpn
- fixed part number display on screen

[2.0.0.6]

- update help menu 

[2.0.0.5]

- add quite mode for saving Rom & display error message when error during saving/flashing bios.

[2.0.0.4]

- add quite mode for flashing ROM

[2.0.0.2]
  - fixed -padevid -passid -pasvid flags when used with the -pak option

[2.0.0.1]
  - fixed labelling on second cards to use correct description
  - add -quiet flag to eliminate all message boxes while flashing

[2.0]
  - fixed errors with reboot prompts when multiple products
  - fixed errors when reporting engine and memory clocks

[1.2.6.1]
  - fixed 'Error reading ROM' errors on Ry6xx products

[1.2.6]
  - added -pavbpn so you can use -pa and supply the VBIOS PN

[1.2.5]
  - resolved -pa issue with -padevid specified
  - removed old/new memory information when displayed after programming (only     applies to legacy Bios) and replaced with old/new device id

[1.2.4]
  - resolved PCI rom access for M66

[1.2.3]
  - Added support for FireGL V3350
  - -ai now displays full PCI ID information
  - asic revision now displays 'N/A' by default

[1.2.2]
  -added support for fireMV

[1.2.1]
  -resolved corrupted -ai output

[1.2.0]
  - resolved command line issues
  - removal of help button

[1.1.9]
  - resolved spaces in file path issues
  - added support for /h /?

[1.1.8]
 -ported custom packaging functionality from ATIFlash:
 -pak              Package an executable for BIOS update according to
                         the commands in .
                         Config file example:
                            outfile = update.exe
                            banner = "Update v1.0"
                            infile = a123.bin
                            command = -pa infile
 - now -h for help + improved command line handling
 - cleaned up help message box

[1.1.7]
-added following functionality
 -fa             Force flashing bypassing already-programmed check.
 -fm             Force flashing bypassing BIOS memory config check.
 -fs             Force flashing bypassing BIOS SSID check.
 -fp             Force flashing bypassing BIOS P/N check.
 -pa               Write BIOS image to all appropriate adapters.
 -padevid=   Use with -pa command to update adapters of specific device ID.
 -passid=    Use with -pa command to update adapters of specific SSID.
 -pasvid=    Use with -pa command to update adapters of specific SVID.

[1.1.6]
  -added SiI1930 support for new architecture

[1.1.5]
  -added SiI1930 support
  -now supports all command line options available in ATIFlash V1.26

[1.1.4]
  -Include the Support for RV550/M71

[1.1.3]
  -fix sst ROM flash issues

[1.1.2]
  -changing displayed value for New VBOIS Image Size
  -from ROM executable size to ROM file size

[1.1.1]
  -add support for 96k BIOS images

[1.1.0]
  - removing the 'force' option

[1.0.9]
  -add support for EMT 64 bit machines

[1.0.8]
  -fix display of total/free system memory on 1Gig+ machines
  -update calculation of total video memory

[1.0.7]
  -fix issue with backlight blanking on certain LVDS designs.

[1.0.6]
  -support write-protected sector on 128k serial flash ROMs
  -improved localization support
  -IA64 support
 
[1.0.5]
  -disable dynamic clock gating during flash
  -force gfx link to L0 during flash
  -change loading for flash library
[1.0.4]
 -corrected RV200 ROM detection
 -add support for RV530/RV515
 -add VMSIZE flag for Dell branch

[1.0.3]
  -re-enable P/N for Dell branch
  -add support for Windows XP64
  -corrected issues found during QA

[1.0.2]
  -enable advanced page
  -complete localization
  -add SSID/SVID moidication support

[1.0.1]
  -add support for Intel HT CPU
  -add additional info on main interface(VBIOS P/N, lenght, CRC)
  -display marketing name for active videocard
  -partial localization
  -remove P/N for Dell branch

[1.0.0]
 -initial release