3.59

• Add RV730 support

3.58

• fix pa paramter, synchronize the same behaviour as ATIWinFlash

3.57

• Add R700 Support
• Reduce size

3.56

• fix corrupted zip file. Same release as 3.55

3.55

• add option (excl_memtrain_dtable) to keep memory training information while flashing new bios
• add partial check for -pavbpn

3.54

• Add "nw" in help

3.53

• Add unique identifier for Ry7xx

3.52

• Add RV770 device ID support

3.51

• add -AMD flag to allow searching for devices with AMD vendor ID

3.50

• update SPI write sequence to check for both WREN and BUSY bits to be deasserted before verifying the write (solves issues seen with intermittent write failures)  

3.49

• update description for RV670 slave devices to identify uniquely on Gemini boards

3.48

• correctly print Old and New P/N when flashing with newer bioses

3.47

• explicitly identify RV635 ASICs

3.46

• fix problems with GPIO19 asserting the CTF signal on RV670 boards

3.45

• fix problems with crashes on some systems when flashing onto blank ROMs

3.43

• added -pavbpn (allows the use of -pa with VBIOS PN)
  added support for new ROM used by multimedia cards (Quito and Lima)

3.42

• fix -mb command for Ry6xx

3.41

• fix Ry6xx SST support

3.40

• fix RV610 + Rialto hang issue

3.39

• fix RV610 write issue

3.38

• Add Quito support  

3.35

• resolved -i/-ai corruption issue

3.34

• -ai now displays full PCI ID information
• ATMEL flash procedurce redesigned for stability/reduced overall flash time
• -ai -scansii combination will report SST/ATMEL firmware revision

3.33

• internal release

3.32

• add flashing over 128KB

3.31

• resolved pak issues with SST/ATMEL

3.30

• update device ID support for RV630/M76 & 0x000 for Ry6xx

3.29

• add new option -pak to build flash package

3.28 11/02/06

• add new option -fa to force flashing if the ROM is already programmed
• add new option -fm to force flashing if legacy memory config mismatch
• add new option -fs to force flashing if SSID mismatch
• add new option -fp to force flashing if BIOS P/N mismatch
• add new command -pa to search and program multiple adapters according to BIOS P/N
• add new option -padevid to search for adapters of a specific PCI device ID when used with -pa command
• add new option -passid to search for adapters of a specific subsystem ID when used with -pa command
• add new option -pasvid to search for adapters of a specific subsystem vendor ID when used with -pa command

3.00 09/08/04

• initial release

3.01 09/16/04

• adjust bus scanning sequence

3.02 09/30/04

• add Rialto support

3.03 10/19/04

• fix issues for Rialto

3.04 12/01/04

• remove 32K limit for Rialto

3.05 12/09/04

• add RN50 support

3.06 03/03/05

• fix issue in flashing secondary adapters

3.07 03/15/05

• fix SST support with -sst option
• fix infinite looping on write failure

3.08 04/05/05

• display BIOS P/N in -i option

3.09 04/29/05

• add -mi command to modify SSID in ROM image
• add support R530

3.10 09/30/05

• support write-protected sector on 128k serial flash ROMs
• add RIO support

3.11 11/11/05

• mask out GENERICD pad output register clear to avoid setting VDDC on A520xx-20 PCB

3.12 11/14/05

• add verified LIMA support

3.13 02/03/06

• add new option -mb for modifying BIOS SSID, SVID, BIOS P/N and bootup message

3.14 02/13/06

• add update SiImage firmware

3.15 02/24/06

• add support for Warhol (RV570/M68/RV560/M67) device IDs
• mask out GPIO[6..3] clear to avoid overwriting MVP settings on RV570/RV560

3.16 04/24/06

• allow autodetect and/or pin specification for SiImage firmware updating

3.17 05/23/06

• fix issues with sst ROMs

3.18 05/26/06

• fix SiImage Firmware update issue

3.19 06/02/06

• improve SiImage Firmware process

3.20 06/09/06

• Add new options, -reboot, -pci, -pcie, -agp, -noagp, -nopcie
• Fix SiI1930 Mobile FW Update issues

3.21

• add new command -ai, advanced information
• add new options -log, -logappend
• reformat help menu, help menu appears with use of -h, /h, -? or /?

3.22

• add display more BIOS information when flashing
• add reboot message when flashing completed successfully

3.23

• fix minor message issue

3.24

• Update Lima Support

3.25

• Add RV550/M71 Support