ATIFlash 3.84

atiflash_384.zip (552.5 KB)
MD5 Checksum: FB00B00958A04D414234C799F54675ED ...
Download Now
File size: 552.5 KB
Publisher: ATI Technologies
Downloads: 2,102 (1.1 GB)
Posted: Mar 14, 2011
Updated: Mar 14, 2011
Operating System: DOS
Newer version available: ATIFlash 4.17

Exact changes unknown, supports HD 6990 and earlier.

Version History

3.79

  • Fix issue with flashing Atmel AT25F512B ROMs

3.78

  • Fix issue with flashing SST ROMs

3.77

  • Fix -mb flag for Evergreen series asics when modifying SSID and SSVID

3.76

  • Add support winbond W25X80A

3.75

  • Add "-lockrom" and "-unlockrom" in Atiflash to lock rom for protection

3.70

  • FIX: correctly report flash error code under linux
  • FIX: correctly detect PCI devices under linux
  • FIX: Fixed segumentation fault when doing -pa -pavbpn on a gfx card with an invalid vbios part number

3.67

  • update RV790 DID

3.66

  • update BN number to 128

3.65

  • Add RV740

3.64

  • Fix Flash on AT25FS010N

3.63

  • Add New ROM support for Atmel AT25FS010N

3.62

  • Fix the save function to save bios > 64K
  • Fix the RV710 flash BIOS configuration to ensure it didn't triggle CTF

3.61

  • Fix mb option to save the entire rom size if rom size is bigger than bios size

3.60s

  • Add support for RV710

3.60

  • Use SCLK to flash BIOS on RV730 only (SCLK will be scaled down while flashing the BIOS)

3.59

  • Add RV730 support

3.58

  • fix pa paramter, synchronize the same behaviour as ATIWinFlash

3.57

  • Add R700 Support
  • Reduce size

3.56

  • fix corrupted zip file. Same release as 3.55

3.55

  • add option (excl_memtrain_dtable) to keep memory training information while flashing new bios
  • add partial check for -pavbpn

3.54

  • Add "nw" in help

3.53

  • Add unique identifier for Ry7xx

3.52

  • Add RV770 device ID support

3.51

  • add -AMD flag to allow searching for devices with AMD vendor ID

3.50

  • update SPI write sequence to check for both WREN and BUSY bits to be deasserted before verifying the write (solves issues seen with intermittent write failures)  

3.49

  • update description for RV670 slave devices to identify uniquely on Gemini boards

3.48

  • correctly print Old and New P/N when flashing with newer bioses

3.47

  • explicitly identify RV635 ASICs

3.46

  • fix problems with GPIO19 asserting the CTF signal on RV670 boards

3.45

  • fix problems with crashes on some systems when flashing onto blank ROMs

3.43

  • added -pavbpn (allows the use of -pa with VBIOS PN)
    added support for new ROM used by multimedia cards (Quito and Lima)

3.42

  • fix -mb command for Ry6xx

3.41

  • fix Ry6xx SST support

3.40

  • fix RV610 + Rialto hang issue

3.39

  • fix RV610 write issue

3.38

  • Add Quito support  

3.35

  • resolved -i/-ai corruption issue

3.34

  • -ai now displays full PCI ID information
  • ATMEL flash procedurce redesigned for stability/reduced overall flash time
  • -ai -scansii combination will report SST/ATMEL firmware revision

3.33

  • internal release

3.32

  • add flashing over 128KB

3.31

  • resolved pak issues with SST/ATMEL

3.30

  • update device ID support for RV630/M76 & 0x000 for Ry6xx

3.29

  • add new option -pak to build flash package

3.28 11/02/06

  • add new option -fa to force flashing if the ROM is already programmed
  • add new option -fm to force flashing if legacy memory config mismatch
  • add new option -fs to force flashing if SSID mismatch
  • add new option -fp to force flashing if BIOS P/N mismatch
  • add new command -pa to search and program multiple adapters according to BIOS P/N
  • add new option -padevid to search for adapters of a specific PCI device ID when used with -pa command
  • add new option -passid to search for adapters of a specific subsystem ID when used with -pa command
  • add new option -pasvid to search for adapters of a specific subsystem vendor ID when used with -pa command

3.00 09/08/04

  • initial release

3.01 09/16/04

  • adjust bus scanning sequence

3.02 09/30/04

  • add Rialto support

3.03 10/19/04

  • fix issues for Rialto

3.04 12/01/04

  • remove 32K limit for Rialto

3.05 12/09/04

  • add RN50 support

3.06 03/03/05

  • fix issue in flashing secondary adapters

3.07 03/15/05

  • fix SST support with -sst option
  • fix infinite looping on write failure

3.08 04/05/05

  • display BIOS P/N in -i option

3.09 04/29/05

  • add -mi command to modify SSID in ROM image
  • add support R530

3.10 09/30/05

  • support write-protected sector on 128k serial flash ROMs
  • add RIO support

3.11 11/11/05

  • mask out GENERICD pad output register clear to avoid setting VDDC on A520xx-20 PCB

3.12 11/14/05

  • add verified LIMA support

3.13 02/03/06

  • add new option -mb for modifying BIOS SSID, SVID, BIOS P/N and bootup message

3.14 02/13/06

  • add update SiImage firmware

3.15 02/24/06

  • add support for Warhol (RV570/M68/RV560/M67) device IDs
  • mask out GPIO[6..3] clear to avoid overwriting MVP settings on RV570/RV560

3.16 04/24/06

  • allow autodetect and/or pin specification for SiImage firmware updating

3.17 05/23/06

  • fix issues with sst ROMs

3.18 05/26/06

  • fix SiImage Firmware update issue

3.19 06/02/06

  • improve SiImage Firmware process

3.20 06/09/06

  • Add new options, -reboot, -pci, -pcie, -agp, -noagp, -nopcie
  • Fix SiI1930 Mobile FW Update issues

3.21

  • add new command -ai, advanced information
  • add new options -log, -logappend
  • reformat help menu, help menu appears with use of -h, /h, -? or /?

3.22

  • add display more BIOS information when flashing
  • add reboot message when flashing completed successfully

3.23

  • fix minor message issue

3.24

  • Update Lima Support

3.25

  • Add RV550/M71 Support