4ghz Club

[Chicken Patty]

haha no, it does it everytime i run that program, dont know what is wrong, but i dont mind,

even did a 3d06 run

wich i think was pretty good

http://img.techpowerup.org/100110/rekord967.jpg

What background is that, it looks sick.

[MetalRacer]

do you think with the hardware in my specs i could pull it off? As for cooling i'm thinking of water or a Prolimatech Megahalems or possibly a xiggy THOR'S HAMMER

You shouldn't have much trouble running 4GHz with that setup, my little Gene II crunches 24/7 @4GHz without fail. As far as coolers I would recommend either of these two.

http://www.svc.com/u120e-rt-775.html
http://www.svc.com/megahalems.html

[(FIH) The Don]

here it is cp

http://img.techpowerup.org/100110/IMG_1130001.jpg

[p_o_s_pc]

Bro from experience I can tell you the Megahalem bro. Water is great but for an i7 you need a heck of a good water setup which is lotta $$$$$ even if you buy parts used. THe cooler is like $60 or something.

My max temp was 90ºc benching wPrime @ 4687 MHz 1.494v. Good enough for me, daily I was able to run up to 4.3 GHz @ 1.240v with temps only at 70-72ºc If I recall correctly.

thanks for your input. You have anything to say about the Asus RII gene?

[TheMailMan78]

I just want everyone to know thats at 4ghz stable that I hate your fucking guts.

[(FIH) The Don]

uh^^

[HammerON]

thanks for your input. You have anything to say about the Asus RII gene?

The only problem I have had with mine crunching at 100% is that the Northbridge gets very hot at high overclocks. Needs extra cooling.

[p_o_s_pc]

The only problem I have had with mine crunching at 100% is that the Northbridge gets very hot at high overclocks. Needs extra cooling.

if that all that is an easy fix. I'm sure i have a spare fan i could put on the heatsink if that doesn't work i will think of something :toast:

[3volvedcombat]

@3volvedcombat, whats your next chip gonna be man? Looking forward to something new.

Its going to be a core i7, 920 from microcenter, already hopeing to scroung 100 bucks from sales and i have alot more to sell.

199.99, ill keep my i7 then itll take me a while to get everything else but ill always have the main part :roll:

[(FIH) The Don]

what motherboard are you planning on then?

have you seen the new rampage III extreme :respect:

[Chicken Patty]

here it is cp

http://img.techpowerup.org/100110/IMG_1130001.jpg

Thanks bro, that's one sexy shot :toast:

thanks for your input. You have anything to say about the Asus RII gene?

Have no experience with it bro, sorry :(

[(FIH) The Don]

yay i know, love the simplicity of it, to bad its low res

[Chicken Patty]

yay i know, love the simplicity of it, to bad its low res

I agree :(

[afw]

Am I late for the party :laugh: ... so here's mine

AFW | Q9550 | 4.165GHz | Prolimatech Megahalems|

http://i336.photobucket.com/albums/n338/afwsl2003/CPU-Zvalidation.jpg

[3dsage]

Better late than never, nice run.

[SummerDays]

I got up to 4.2 Ghz on air, it would start but Windows wouldn't load. Haven't played around with the settings yet though.

[3dsage]

I got up to 4.2 Ghz on air, it would start but Windows wouldn't load. Haven't played around with the settings yet though.

Whats your setup bro?

[SummerDays]

4.2 Ghz on Air. i7 Rampage II Extreme.

Any opinions on the minimum voltage for > 4.0 Ghz?

Sandra Si is pretty tough on processors.

I'm think that a methodical approach to benchmarking is needed. It would take a day or two to complete. Start at 133 Mhz and continue up to 200 Mhz, benchmarking at 1 Mhz intervals and measuring perfomance each time.

[Chicken Patty]

4.2 Ghz on Air. i7 Rampage II Extreme.

Any opinions on the minimum voltage for > 4.0 Ghz?

Sandra Si is pretty tough on processors.

I'm think that a methodical approach to benchmarking is needed. It would take a day or two to complete. Start at 133 Mhz and continue up to 200 Mhz, benchmarking at 1 Mhz intervals and measuring perfomance each time.

Very good job man :toast:

[Zenith]

Zenith | Wolfdale E0 E8400 | 4392 | Noctua |

http://img263.imageshack.us/img263/1788/4400s.th.jpg (http://img263.imageshack.us/i/4400s.jpg/)

[Fitseries3]

voltage isnt correct...
http://img.techpowerup.org/100115/Capture001337.jpg

[(FIH) The Don]

that is very good for a 550, what board are you using?

[Fitseries3]

ecs 785g

xigmatek dk

http://img.techpowerup.org/100115/Capture002352.jpg

[Fitseries3]

http://img.techpowerup.org/100115/Capture002417.jpg

[JrRacinFan]

That's way tooo slow fits. :p

how you liking the 550BE btw? Would you recommend the cpu to someone like myself? How does it compare to your previous setups?

[Fitseries3]

its a good chip but im more fond of intel.

id say this chip feels about like a e6400 even when OCed. nothing special really.


on the OC....

i've been toying with this chip for about 40mins now off and on. havent really tried to OC anything yet. VERY LOOSE on the OC so far.

[JrRacinFan]

Oh ok, so coming from a 9850BE it wouldn't be a good choice then, 2 vs 4 threads. Would probably have to loook at a 810 or 925 to classify something as an upgrade then to be more worth my while.

[skylamer]

http://store.picbg.net/pubpic/73/B8/977bb45d60c173b8.png


http://store.picbg.net/pubpic/73/B8/977bb45d60c173b8.png

[skylamer]

my pentium d goes to this up, when i am trying w7 under virtualbox axaxaxaxa ^^

[SystemViper]

Entry For Single Core

done with almost stock air cooling, this cele got a lot to go

SystemViper | Celeron 360 (single core) | 4.8099 GHZ| AIR |


http://img.techpowerup.org/100116/4-8tpu.jpg

[(FIH) The Don]

air or whater?

whatever it is its nice oc'ing haha:roll:

[road-runner]

Can I play? :D


http://valid.canardpc.com/show_oc.php?id=954517


http://i135.photobucket.com/albums/q121/road-runnerOCC/6958.jpg

[(FIH) The Don]

no way dud, you're in the mile high club:roll:

LN2?

[3volvedcombat]

I think road runner was using His Phaze, Its godly to run a Super PI at 6Ghz. And get under 7 seconds under your belt :D

[TheMailMan78]

Can I play? :D


http://valid.canardpc.com/show_oc.php?id=954517


http://i135.photobucket.com/albums/q121/road-runnerOCC/6958.jpg

Wow man. All I can say is WTF WOW! How do you keep that cool?

[KieX]

http://store.picbg.net/pubpic/73/B8/977bb45d60c173b8.png


http://store.picbg.net/pubpic/73/B8/977bb45d60c173b8.png

4.4V VID? That can't be right

[exodusprime1337]

here we go.. got another one for 4Ghz plus, this is stable.. i'll try and post a max clock in a sec

http://img.techpowerup.org/100116/cpuz oc.png

[road-runner]

That is on the cascade, I am going to put it under LN2 Monday... :D

[MetalRacer]

Can I play? :D


http://valid.canardpc.com/show_oc.php?id=954517


http://i135.photobucket.com/albums/q121/road-runnerOCC/6958.jpg

That is awesome RR.:rockout:

[SystemViper]

That is on the cascade, I am going to put it under LN2 Monday... :D

yea i heard that those new i5 clock like crazy

very nice

[Chicken Patty]

WhenAShen I get home I'll post my stable 4GHZ clock with my Phenom II 965

[imperialreign]

WhenAShen I get home I'll post my stable 4GHZ clock with my Phenom II 965


For some reason - that reminds me I need to get one of my single-cores back out and re-claim the top single-core intel slot here. :p

[Chicken Patty]

For some reason - that reminds me I need to get one of my single-cores back out and re-claim the top single-core intel slot here. :p

Do it, do it! :nutkick:

[SystemViper]

Do it, do it! :nutkick:

For some reason - that reminds me I need to get one of my single-cores back out and re-claim the top single-core intel slot here. :p

BAm looks like i better not stop till i get the 26*192 multi firing, it's so close.... :roll:
make you work for that top spot :toast:

[3dsage]

Great stuff guys, we need so more AMD X2 runs up on the board.
:toast:
Can I play? :D


http://valid.canardpc.com/show_oc.php?id=954517


http://i135.photobucket.com/albums/q121/road-runnerOCC/6958.jpg

I think im gonna rummage thru the thread and make an ELITE members list, for 5GHZ+ overclocks, I think theres enuff for a top 10:rockout:

[SystemViper]

Great stuff guys, we need so more AMD X2 runs up on the board.
:toast:


I think im gonna rummage thru the thread and make an ELITE members list, for 5GHZ+ overclocks, I think theres enuff for a top 10:rockout:

so you want us to start posting our 5+ clocks, i have been clocking down to get on this list :toast:
I thought the goal was to get as close to 5ghz but not go over?

[3dsage]

so you want us to start posting our 5+ clocks, i have been clocking down to get on this list :toast:
I thought the goal was to get as close to 5ghz but not go over?

I was just saying:p, I think theres a 5GHZ club around here somewhere.

BTW you have the top spots for Single core and Dual core:rockout:

[SystemViper]

I was just saying:p, I think theres a 5GHZ club around here somewhere.

BTW you have the top spots for Single core and Dual core:rockout:

yea this was a fun topic to play in. Appriciate your effort! :toast:

[SystemViper]

post this


post in single core, thanks...

SystemViper | Celeron 360 (single core) | 4.992 GHZ| AIR |

link here (http://valid.canardpc.com/show_oc.php?id=956947) :pimp:

I decided to do some winter benching and so i am starting with the celeron,
This is my first in a while and also a good start to 2010. I like using the celeron
because of its very low cost and I have a great board for pushing the 775 chips.
- My Gig UD3p -


I saw that Imperialreign was gonna take a shot at the single core title, so i figured
that i better get to the highest multi possible with the 360 without breakin 5k
So that is 192*26 (this chip has a locked multi of 26)

I did all this will a cheap old air cooler, so it will be fun to push it with some extreem cooling!

http://img.techpowerup.org/100117/4-9.jpg

[imperialreign]

BAm looks like i better not stop till i get the 26*192 multi firing, it's so close.... :roll:
make you work for that top spot :toast:

Well, if I'd get off my tail and quit being lazy, I can put up a good fight . . . considering I clocked that P4 on air, and am now using liquid cooling :D

But, again, I need to quit being lazy, first. :p

[3volvedcombat]

VIPER, try to get 6Ghz+ Man, try to get 7.5Ghz and take the world record!!!!! :D

[SystemViper]

VIPER, try to get 6Ghz+ Man, try to get 7.5Ghz and take the world record!!!!! :D

For some reason i can only go up to 1.4v on the core voltage on my current mobo for this chip, i need to figure out how to go higher or it will be a waste, i think i will try a newer bios for the UD3P and see but i might need a different mobo to go higer... time to google a bit! :toast:


I also have a E5200, i see you kicked it's butt, how was that to OC?
some nice stuff you got there 3volvedcombat -topnotch-

Damn the closer i look you also rocked a Q9550, i have one of them tooo to beat on....
plus you are usign he UD3P, man we shoudl compare notes....

[jlewis02]

Cooled by air Thermalright True Black.

http://valid.canardpc.com/cache/banner/486203.png (http://valid.canardpc.com/show_oc.php?id=486203)

[MetalRacer]

Well I decided to play with my daily driver a little today. ASUS P6T Deluxe H2O cooled.

http://img.techpowerup.org/100117/Capture062411.jpg

[Chicken Patty]

Chicken Patty | Phenom II 965 C3 | 4128 MHz GHZ| AIR |

http://img.techpowerup.org/100118/Capture314.jpg

[Cold Storm]

Chicken Patty | Phenom II 965 C3 | 4128 MHz GHZ| AIR |

http://img.techpowerup.org/100118/Capture314.jpg



Good job CP! Now, did you have to have the "fireworks" wally due to getting 4.1ghz on a 965?

:laugh:

[Chicken Patty]

Good job CP! Now, did you have to have the "fireworks" wally due to getting 4.1ghz on a 965?

:laugh:

It was one of the reasons :p

[sinar]

http://img138.imageshack.us/img138/152/screenshot525.jpg

http://img195.imageshack.us/img195/2663/screenshot529.jpg

[Velvet Wafer]

i wont try to get even one mhz more from this proc, as long as my rad isnt utilized with enough fans... it would be futile:o

i need a better OC-Proc, damn!:p

[DirectorC]

O HAI!

http://valid.canardpc.com/show_oc.php?id=959979

http://img188.imageshack.us/img188/9532/e8400oc2.png

[jjFarking]

I don't have anything to prove the stability (other than having run F@H, as well as GTA IV for many hours), nor will I waste CPU time on that when I should be crunching :p
Mainly because I already did the stability testing and .. forgot to take a screenie :o

jjFarking | Phenom II 965 C3 | 4020 | Air
http://img685.imageshack.us/img685/1886/system4020mhz.jpg

Validation:
http://img685.imageshack.us/img685/1971/4020cpuzvalidation.jpg

Having a better cooler makes a big difference for sure.
Just gotta wait for the AS5 to cure properly, before going a bit higher again.
Running @ 1.507 atm for complete stability.

[Kei]

Kei | Phenom II 955 C2 stepping | 4.0Ghz | Cooler Master V8 (lapped w/original fan)

I believe I can now officially say I'm in this club! :rockout:
I've been doing 4-4.1Ghz benches for a little while now, but they've never been stable for more than a few benches and needed serious volts to make it happen.

Well I'm good to go now, and all thanks to a somehow magical Gigabyte MA770T-UD3P budget $80 board and a $20 Enzotech mosfet cooler lol. I've had much higher specced boards before this one, but somehow this is the one that gets it stable for normal use as well as benching.

wPrime 32M & 1024M screenshot as proof of stablity for normal use all tests run back to back to back with no break between runs. I'll think about running a 4hr stabilty run a bit later on...once I get over staring at the wattage meter under full load (my daily clock is 3.2Ghz @ 1.168v...).

Kei


CPU-Z Validation
http://valid.canardpc.com/show_oc.php?id=965853

[3dsage]

Nice Stuff guys, thanks for throwing your runs up in the proper format:respect:

Congrats Kei:toast:

[Kei]

Nice Stuff guys, thanks for throwing your runs up in the proper format:respect:

Congrats Kei:toast:

Thanks sage :D I giggled when I saw my name finally on that list...and right after none other than 'rx-7'. :rockout:

Kei ----> knows that rx-7's (and 8's) are the greatest cars ever created :p

[Chicken Patty]

Can my i7 get bumped up, just for e-peen status :roll:


Chicken Patty | Intel Core i7 920 | 4.734 GHZ| AIR |


http://img.techpowerup.org/100122/Capture346.jpg

[3dsage]

Thanks sage :D I giggled when I saw my name finally on that list...and right after none other than 'rx-7'. :rockout:

Kei ----> knows that rx-7's (and 8's) are the greatest cars ever created :p

NP, I love Rx-7's man I wish I could afford a mint 95 rx for under 10K.

Can my i7 get bumped up, just for e-peen status :roll:


Chicken Patty | Intel Core i7 920 | 4.734 GHZ| AIR |


http://img.techpowerup.org/100122/Capture346.jpg


Nice:toast: You only need a little more to get into the TOP 10 bro, go for it.
You'll have Ron Jeremy E-Peen status :laugh:

[Chicken Patty]

Nice:toast: You only need a little more to get into the TOP 10 bro, go for it.
You'll have Ron Jeremy E-Peen status :laugh:

one problem with doing that, look at my specs. Notice what the issue is?


Dammit, this is my 67th post since I woke up today. I need to go to bed :(

[3dsage]

one problem with doing that, look at my specs. Notice what the issue is?


Dammit, this is my 67th post since I woke up today. I need to go to bed :(

Photoshop man:laugh:

Damn 67 posts in a day:rockout:

[Chicken Patty]

Photoshop man:laugh:

Damn 67 posts in a day:rockout:

More like 70 now. Naw, I don't like cheating bro, it is what it is. Thats a damn impressive clock for basic non extreme air cooling, and in Miami! No excuse here, cold weather is not typical here.

[3dsage]

More like 70 now. Naw, I don't like cheating bro, it is what it is. Thats a damn impressive clock for basic non extreme air cooling, and in Miami! No excuse here, cold weather is not typical here.

I know man, that is impressive as hell:toast:

[Chicken Patty]

I know man, that is impressive as hell:toast:

Sure is, I got rid of the setup, I had my fun with it. Maybe I build something even better in the near future, you never know.

[haha216]

haha216 | Intel i7 975 | 4.22Ghz | Liquid

STABLE

http://img684.imageshack.us/img684/2923/cpuz422ghz.jpg

[Chicken Patty]

haha216 | Intel i7 975 | 4.22Ghz | Liquid

STABLE

http://img684.imageshack.us/img684/2923/cpuz422ghz.jpg

Welcome to the 4GHz club, and welcome to TPU. :toast:

[JrRacinFan]

Well so far I havent seen any single core posts ....

Enjoy! This is at +.02 volts from stock on an Abit AW9D-Max!!! :)

http://forums.techpowerup.com/attachment.php?attachmentid=24899&stc=1&d=1239538544

Posted that a lil while ago for you SV! :p

[smashed_99cbr]

q9550 e0 @ 4.25GHz @ 1.36v under LinX load STABLE

http://valid.canardpc.com/show_oc.php?id=979511

this was just a quick pic... 20 passes on LinX

I have ran 500 passes on LinX at these settings... I can prove it if I have to... lol (I will just have to do it again...) I have ran a run OCCT pass and 48hours Prime

I am currently trying to get everything stable @ 4.5GHz 533 x 8.5(so far I can get it to the win7 logo screen then it freezes... 533FSB just might be too much on a quad...)... its not looking like its going to happen though... the volts are way to high at that speed...

http://i222.photobucket.com/albums/dd259/smashed_99cbr/Untitled-1.png

[p_o_s_pc]

can this get me in with the i7
http://img.techpowerup.org/100127/wprime_4.jpg

[Chicken Patty]

^^^duh!!! :laugh:

[Cold Storm]

^^^duh!!! :laugh:



Nah, it needs to be at lease 4.2ghz :p

[Chicken Patty]

haha216 | Intel i7 975 | 4.22Ghz | Liquid

STABLE

http://img684.imageshack.us/img684/2923/cpuz422ghz.jpg

Nah, it needs to be at lease 4.2ghz :p

yeah, it has to be 4.2Ghz to compensate for clock flunctuation. :roll:

[Duffman]

I guess I'll join seeing as how this is my first setup over 4ghz.

Duffman | Intel Xenon W3520 | 4.2Ghz | Mega Shadow Air

http://forums.techpowerup.com/attachment.php?attachmentid=32787&stc=1&d=1265260657

[OnBoard]

OnBoard | Core i5-750 | 4.220 GHz | AIR Alpenföhn Brocken

http://valid.canardpc.com/show_oc.php?id=1005714

My first Quad submission, this chip is a monster :)

[brandonwh64]

brandonwh64 | I7-920 D0 | 4.1ghz | Custom Water

http://i32.photobucket.com/albums/d31/brandonwh64/all.jpg

[(FIH) The Don]

tried a loose overclock, just raised multi and cpu volt

http://valid.canardpc.com/cache/banner/1006134.png (http://valid.canardpc.com/show_oc.php?id=1006134)
and cpu-z is stil fuckin with my volts

http://img.techpowerup.org/100208/oc.jpg

[Chicken Patty]

So 1.475? Not bad. Good clocking :D

[(FIH) The Don]

yeah 1.475:D

and it passed intelburntest, will put it to 25 runs in a minute just to make sure,
but first i gotte get some food:toast:

[Chicken Patty]

Me too, but lunch is an hour away :(

[(FIH) The Don]

i'm going for dinner atm haha:D

an poor you;)

[Chicken Patty]

Shhhhhh!! :slap: :laugh:

[MetalRacer]

http://img.techpowerup.org/100212/Capture024.jpg

[(FIH) The Don]

:respect:

[Velvet Wafer]

http://img.techpowerup.org/100212/Capture024.jpg

*cough* Damn you, Intel People!:D

to boldly go, where AMD still has to go;)

[3volvedcombat]

I give props to the 4.6Ghz bench using less then 1.4 volts. Beats my 4.3Ghz benching at 1.31 volts. Just cause its a i7 hahahaahaha :D

[overclocking101]

heres my i7

[Chicken Patty]

heres my i7

Good job bro and welcome aboard :toast:

[jlewis02]

I think this is about the best I can do.
http://valid.canardpc.com/cache/banner/1025665.png (http://valid.canardpc.com/show_oc.php?id=1025665)
http://i175.photobucket.com/albums/w156/jlewis02/502FSB.jpg

[(FIH) The Don]

that is very nice imo,

[fatguy1992]

Playing around with W3570 on IFX-14 (air).

http://img85.imageshack.us/img85/9606/maxsp1m.png (http://img85.imageshack.us/i/maxsp1m.png/)

[Chicken Patty]

Nice clocks Daniel :toast:

[bogmali]

Nah, it needs to be at lease 4.2ghz :p


I won't post all of mine until I beat that current i5-750 record holder :p You know it's coming right:D

[fatguy1992]

Nice clocks Daniel :toast:

Thanks, not as good as my 920's air result (benched 4.8GHz no HT and 4.5GHz HT). But that chip was no good under sob zero :mad:

All I can find atm :(

http://www.hwbot.org/community/submission/871984_fatguy1992_pifast_core_i7_920_17.55_sec

[hoss331]

Right now this is the closest to 5ghz ss I have for the Q9650 without going over.

http://i131.photobucket.com/albums/p293/hoss281/4993.png

[fatguy1992]

Use setfsb, move it up one place, should be just under 5GHz.

[hoss331]

Yea I know, thats just the closest one I had on hand. :)

[fatguy1992]

Alright, anyway still a dam good clock.

What cooling is that done on?

[hoss331]

Thats on water, next time I bench it ill try to remember to get one a little closer.

[fatguy1992]

Thats really good for water, I was expecting you to say single stage phase change. You need to test it under sub zero.

[hoss331]

I want to badly, ive been trying to make up my mind on getting a SS or a pot.

[fatguy1992]

I would personally get a SS, because you can turn it on and off when you want. Where as dice and LN2, if you run out half way, too bad your done. Plus it can be hard to watch the LN2/dice temps while trying to overclock at the same time (speaking from experience). I'v used LN2, SS and cascade, and personally the SS and cascade are way more fun.

But in the end its your choice.

As for cost, SS should cost as much as a dewar + pot + some LN2. The LN2 is colder, but way harder to manage and harder to insulate for.

[brandonwh64]

OK guys! heres my 4's

This is my I7 build under water

http://i32.photobucket.com/albums/d31/brandonwh64/all.jpg

This is my HTPC on crappy air.

http://img.techpowerup.org/100218/PD8304ghz.jpg

[Chicken Patty]

Great job Brandon :toast:

[fatguy1992]

I you overclock that GPU you should get a much better score.

[brandonwh64]

already tried to overclock it and the nvidia driver crashes when i start stress testing so im just stuck with what i got :(

[fatguy1992]

Hmm thats strange, I only get that at really high clocks. That sucks.

[brandonwh64]

yea i can overclock it alittle but when i goto do a 3dmark06 or something it will say nvidia driver has encountered an error sometime during it

[fatguy1992]

Maybe try new drivers?

All I can think of, anyway not a big problem I guess.

[Goodman]

Goodman | AthlonII x2 240 | 4.130Ghz | Vanquisher air cooling

http://valid.canardpc.com/show_oc.php?id=1023360

[fatguy1992]

Says it was rejected?

[Goodman]

Says it was rejected?

I didn't notice this before , thanks! to let me know about it

I really did this clock any idea why it bean rejected?:confused:

[fatguy1992]

Np, I don't know whats wrong with it, maybe just a glitch. Doesn't matter.

[Goodman]

Np, I don't know whats wrong with it, maybe just a glitch. Doesn't matter.

It matters to me... make me look like a cheat...:mad:

Anyhow i send an email to CPU-z will see what they have to say...
If i have to i will overclock again & make a video of it with time frame in it & send it back in CPU-z email...

[bogmali]

http://img.techpowerup.org/100219/i7-860_OC.jpg

http://img.techpowerup.org/100219/i7-860_CPU-Z.jpg

[Cold Storm]

http://img.techpowerup.org/100219/i7-860_OC.jpg

http://img.techpowerup.org/100219/i7-860_CPU-Z.jpg

Hey Bog... I'm with ya. :roll:

Cold Storm | i7 860 @ 4011mhz


http://img.techpowerup.org/100219/i7 860 4-8 4ghz.jpg

[Goodman]

Goodman | AthlonII x2 240 | 4.018Ghz | Vanquisher air cooling

http://valid.canardpc.com/show_oc.php?id=1029550


EDIT: I still can get over 4.1 GHz but CPU-z always rejected for some kind of reason don't know why?:confused:

[bogmali]

CS-that is a rather high voltage bro, you running air or water? I can still push my multiplier to 21 and BCLK to 210 and get 4.4Ghz:D

[Cold Storm]

CS-that is a rather high voltage bro, you running air or water? I can still push my multiplier to 21 and BCLK to 210 and get 4.4Ghz:D



That was just pop it in and see if it boots there.. I did the same with the i5 750.. then took it down to 1.2625v. Just wanted to see what it can do in the first 15m of being in my system... :roll:

This weekend will be tuning it for love.

4.4ghz here I come! great stuff Bog.

Plus I had a Msconfig problem that Paulieg helped me with since I forgot all about msconfig.. :roll:

[fatguy1992]

I was bored this afternoon so I played with my W3570, still only air cooling, can't wait for my cascade to come back, so boring without it.

http://img99.imageshack.us/img99/413/maxmhz.png (http://img99.imageshack.us/i/maxmhz.png/)

[belitsky]

Belitsky| i5 750 | 4000 | Scythe Mugen II

http://forums.techpowerup.com/attachment.php?attachmentid=33599&stc=1&d=1266817709

[(FIH) The Don]

been awhile since anyone posted something here ;)

http://img.techpowerup.org/100306/oc1.jpg

[rickss69]

Something to gander at...:)


http://i434.photobucket.com/albums/qq69/rickss69/ScreenHunter_01Mar061449.jpg

[(FIH) The Don]

nice bro, what cooling?

[rickss69]

nice bro, what cooling?

Coolit Boreas atm, but it can be done on regular water cooled loop or a good air cooler as well.

[aCid888*]

Easy 4GHz.

http://img.techpowerup.org/100304/Capture062192.jpg

[rickss69]

Here is a screen with RealTemp...


http://i434.photobucket.com/albums/qq69/rickss69/ScreenHunter_01Feb021342.jpg

[Lionheart]

Hey guys, do you's think I have too much voltage on the 920?:confused:


http://img.techpowerup.org/100306/My Overclock.jpg

[HammerON]

It does seem a little high, however each 920 is differnet. I believe Paulieg and Binge have made several posts about how 920's really vary in VCore.
Run LinX and see what temps you get.

[(FIH) The Don]

thats is quite high for a DO

have a friend who does 4.1 on 1.125+-

is it unstable under that voltage or is it first try?

http://img.techpowerup.org/100306/super pi 4.2.jpg

[Lionheart]

thats is quite high for a DO

have a friend who does 4.1 on 1.125+-

is it unstable under that voltage or is it first try?

http://img.techpowerup.org/100306/super pi 4.2.jpg

Actually I started at around 1.36v @ 4GHZ, ran some test and it wasnt stable so I increased the voltage to 1.375, booted the system again, ran some test again, wasnt stable:banghead: so I increased the voltage to 1.388v or something like that, it ran the tests longer and I was started to get happy but it BSOD so I tried one more time and set it too 1.41v and it was finally stable, MAX load CPU temps were 75C - 79C, cores were slightly higher.

Just wish I didnt have to use so much voltage, increashed temps more than I thought!:cry:

[(FIH) The Don]

do you use XMP on the memory?

[Lionheart]

do you use XMP on the memory?

Nah man, I dont have it on that setting.

My RAM is running at 1524mhz, XMP runs at 1866mhz and apparently this MB wont wrk at that speed!:cry:

PS. how the hell did ur friend manage those voltages at that speed?

[(FIH) The Don]

hmm okay, just got another friend with RIIE board, dominators and a i7 920 do, and when he turns on XMP on that board all hell breaks loose

you remember to turn off eist, C1E, spread spectrum etc?

and my friend got one of the cpus from the best batch in the world, or one of them:D

[rickss69]

Nah man, I dont have it on that setting.

My RAM is running at 1524mhz, XMP runs at 1866mhz and apparently this MB wont wrk at that speed!:cry:

PS. how the hell did ur friend manage those voltages at that speed?

Can you post a RealTemp screen? It looks like your hsf is not seated properly or is not up to snuff.

[Lionheart]

hmm okay, just got another friend with RIIE board, dominators and a i7 920 do, and when he turns on XMP on that board all hell breaks loose

you remember to turn off eist, C1E, spread spectrum etc?

and my friend got one of the cpus from the best batch in the world, or one of them:D

Not sure what eist is, couldnt find it in the BIOS settings unless Im blind but C1E & speed spectrum are both disabled.

Yeah your friend sure has some luck, would be nice to have that!:toast:

PS. thanx for the help too!:rockout:


Can you post a RealTemp screen? It looks like your hsf is not seated properly or is not up to snuff.


I will double check it and post some screenies soon.:rolleyes:

[(FIH) The Don]

NP man, glad to help with what i can :laugh;

take a look here if you havent already http://forums.techpowerup.com/showthread.php?t=108526

i use it from time to time to refresh the basics for i7 oc'ing;)

[Chicken Patty]

Hey guys, do you's think I have too much voltage on the 920?:confused:


http://img.techpowerup.org/100306/My Overclock.jpg

You should post a BIOS template with your settings, something is off there. I know they can vary a lot, especially later batches need more vcore, but I think that's just too much.

hmm okay, just got another friend with RIIE board, dominators and a i7 920 do, and when he turns on XMP on that board all hell breaks loose

you remember to turn off eist, C1E, spread spectrum etc?

and my friend got one of the cpus from the best batch in the world, or one of them:D

On XS there is a member by the username of "IMO". He has a i7 that does 4.2 GHz @ about that voltage, it's insane!

[Lionheart]

You should post a BIOS template with your settings, something is off there. I know they can vary a lot, especially later batches need more vcore, but I think that's just too much.



On XS there is a member by the username of "IMO". He has a i7 that does 4.2 GHz @ about that voltage, it's insane!



How do I get a BIOS Template?:confused:

[Chicken Patty]

How do I get a BIOS Template?:confused:

This should be it. Fill it out and post it. This way we can see exactly what you are doing. :toast:

http://i4memory.com/f54/asus-rampage-extreme-bios-template-15803/

[Lionheart]

This should be it. Fill it out and post it. This way we can see exactly what you are doing. :toast:

http://i4memory.com/f54/asus-rampage-extreme-bios-template-15803/

Im using the Rampage II Extreme, not the first one, would it make any difference?:confused:

[Chicken Patty]

Im using the Rampage II Extreme, not the first one, would it make any difference?:confused:

You can try posting as much info as possible, sure lot of the BIOS settings are shared. IF not google for a template for your board.

[FilipM]

Hey guys, do you's think I have too much voltage on the 920?:confused:


http://img.techpowerup.org/100306/My Overclock.jpg


How do you get 190.5 BCLK?

[mastrdrver]

Im using the Rampage II Extreme, not the first one, would it make any difference?:confused:

Here is the template for you. Just leave the "code" tags around it. Don't forget to list what Bios your using if different.

Asus RAMPAGE 2 EXTREME
1639 Bios Template

****************************
AI Tweaker
****************************
AI Overclock Tuner: Manual
CPU Ratio Setting: 20
BCLK Frequency: 133
PCIE Frequency: 100
DRAM Frequency: DDR3-1066Mhz
UCLK Frequency: 2133Mhz
QPI Link Data Rate: AUTO

*******************
DRAM Timing Control
*******************
DRAM CAS Latency: 7 DRAM Clock
DRAM RAS# to CAS# Delay : 7 DRAM Clock
DRAM RAS# PRE Time: 7 DRAM Clock
DRAM RAS# ACT Time: 24 DRAM Clock
DRAM RAS# to RAS# Delay: AUTO
DRAM REF Cycle Time: AUTO
DRAM WRITE Recovery Time: AUTO
DRAM READ to PRE Time: AUTO
DRAM FOUR ACT WIN Time: AUTO
DRAM Back-To-Back CAS# Delay: AUTO

DRAM Timing Mode: AUTO
DRAM Round Trip Latency on CHA: AUTO
DRAM Round Trip Latency on CHB: AUTO
DRAM Round Trip Latency on CHC: AUTO

DRAM WRITE To READ Delay(DD): AUTO
DRAM WRITE To READ Delay(DR): AUTO
DRAM WRITE To READ Delay(SR): AUTO
DRAM READ To WRITE Delay (DD): AUTO
DRAM READ To WRITE Delay (DR): AUTO
DRAM READ To WRITE Delay (SR): AUTO
DRAM READ To READ Delay(DD): AUTO
DRAM READ To READ Delay(DR): AUTO
DRAM READ To READ Delay(SR): AUTO
DRAM WRITE To WRITE Delay(DD): AUTO
DRAM WRITE To WRITE Delay(DR): AUTO
DRAM WRITE To WRITE Delay(SR): AUTO

****************************
CPU Voltage: AUTO
CPU PLL Voltage: 1.80
QPI/DRAM Core Voltage: 1.20
IOH Voltage: 1.10
IOH PCIE Voltage: 1.50
ICH Voltage: 1.10
ICH PCIE Voltage: 1.50
DRAM Bus Voltage: 1.60
DRAM DATA REF Voltage on CHA: AUTO
DRAM CTRL REF Voltage on CHA: AUTO
DRAM DATA REF Voltage on CHB: AUTO
DRAM CTRL REF Voltage on CHB: AUTO
DRAM DATA REF Voltage on CHC: AUTO
DRAM CTRL REF Voltage on CHC: AUTO
****************************
Load-Line Calibration: AUTO
CPU Differential Amplitude: AUTO
CPU Clock Skew: AUTO
CPU Spread Spectrum: Disabled
IOH Clock Skew: AUTO
PCIE Spread Spectrum: Disabled

CPU Advance Settings
C1E Support: Disabled
Hardware Prefetcher: Enabled
Adjacent Cache Line Prefetcher: Enabled
Intel (R) Virtualization Tech: Disabled
CPU TM Function: Disabled
Execute Disable Bit: Disabled
Intel (R) HT Technology: Enabled
Active Processor Cores: ALL
A20M: Disabled
Intel (R) C-State Tech: Disabled
****************************

[Lionheart]

How do you get 190.5 BCLK?

Well you have to spend $600 on a overpriced motherboard lmao:laugh: jks.

Simple, all I did was just up the BCLK from 133 to 190, and its runnin fine!:toast:

[(FIH) The Don]

i think he meant how you got the last 0.5;)

anyways, imma torture my SLI LE tonight and see if i can hit 4.3ghz on air with the thermalright IFX 14.
all doors and windows are open so it can get really cold in here :D

stay tuned

[Lionheart]

Ah I thought so, dont no man, its like that when its at default settings as well, for eg 133.05, I remember seeing it in CPU'Z.

[LagunaX]

This is my last LGA 775 build.
My next one will be 1156/DDR3.

E8400 E0, batch Q826A399, week 08/13/08
Air cooling with TRUE and Enermax Magma fan.
http://i246.photobucket.com/albums/gg84/jhchang69/YMAAe840045ghzair.jpg
http://i246.photobucket.com/albums/gg84/jhchang69/YMAAEverest.jpg

[ERazer]

Heres my 4ghz 24/7 WCG cruncher :D

http://img.techpowerup.org/100320/4ghz.jpg

http://img.techpowerup.org/100320/CIMG0150.jpg

[MetalRacer]

Might as well add the X980 to the club.

http://img.techpowerup.org/100404/WPrime 3.787617.jpg

[WOG-BOY]

WOG-BOY | i7-860 | 4.000 GHZ| THERMALTAKE ISGC-200 |


http://valid.canardpc.com/show_oc.php?id=1110262

[p_o_s_pc]

EDIT:sorry wrong thread :o

[theJesus]

theJesus | C2D E7200 | 4.33 GHZ| modded CoolIT Eliminator

http://img.techpowerup.org/100413/theJesus4.33GHZ.jpg

Prime95 stable for 2 seconds :laugh: I couldn't get into windows without instant BSOD any higher than that even with 1.6v :ohwell:

[Hayder_Master]

add me
http://forums.techpowerup.com/attachment.php?attachmentid=34926&stc=1&d=1271233486

[theJesus]

You should do the 1M test for better comparison with others. lol I tried it at 4.33ghz and blue-screened immediately

[Optimouse Prime]

hey guys ive got a Q9550 @3.9Ghz with 1.36875 core voltage and no matter how hard i try and push i cant get that 4GHz im just wondering if someone could help get that last .1 :) ive got an Asus Striker II Formula motherboard and my NB : 1.44, HT 1.25, i did lower my RAM clocks to 800 and at one point got into Windows but about 4minutes later it just froze, wondering if anyone could help me as it would be much appreciated :)

[sNiPeRbOb]

Can I Haz Spot in Club??

sNiPeRbOb | Phenom II 965 | 4.017Ghz | Watercooled (Swiftech MCR220, MCP350, Koolance CPU 340, 1/2-3/4 tubing) |
http://valid.canardpc.com/show_oc.php?id=1142217

[HammerON]

Bump for an awesome thread:toast:

HammerON|i7 920 DO|4.523GHz|Cooler Master V8|
http://img.techpowerup.org/100528/Capture009351.jpg

http://img.techpowerup.org/100528/Capture010012.jpg

[roast]

W00t... I'll grab a CPU-Z screenie and post back later. :)

[KieX]

Et voila! My 24/7 Cruncher. Been running for while, finally got round to putting it on this club. It's screenshot through VNC as it runs without monitor/keyboard.

KieX | i7 920 D0 | 4.0 GHz | Prolimatech Megahalems |

http://img.techpowerup.org/100528/4GHz.jpg

[rickss69]

rickss69 | 1090T BE | 6409.06 GHZ| LN2|

[sneekypeet]

rickss69 | 1090T BE | 6409.06 GHZ| LN2|

you sir, need to look for Damulta's 5Ghz+ club:roll:

Nice clock!

[Zubasa]

Zubasa | 1055T | 4060Mhz | PCCooler "Oceaner 5" (HP-1216V) |
http://img.techpowerup.org/100615/Capture002-20100616-040636.jpg

[3volvedcombat]

Could i ask a question on the 4 Ghz club.

Most don't have experience in ln2. but in DEC 09, i was doing suicide runs and such with my golden q9550.

Came to the conclusion that the motherboard i was using just ran out of extra FSB room, and cooling on my processor was scary, a little H50 water cooler.

I got my processor on high end air basically to go to 4.655Ghz, q9550 overclock.

you think I could do better with this q9550 later on?

Would Dry ice/ Liquid Nitro, Better Ram sticks, bump up higher clocks with my q9550.

Of-course im probably gonna see if there are any hard-mods for my ep45-ud3p but i belive i tried looking and had no luck.

I work as a computer tech at a shop 40 minutes away from my house, but if i ever find a hard mod guide for the EP45-UD3P i will approach it and try to do it, Have the tools necessary.

Can i get a little advice and help :)!

[mdbrotha03]

http://img.photobucket.com/albums/v307/burgess_dbz/OC.jpg

[overclocking101]

oops im back in!

OC101|i5-655K|5077mhz|air cooled|

http://valid.canardpc.com/show_oc.php?id=1381723

[JrRacinFan]

oops im back in!

OC101|i5-655K|5077mhz|air cooled|

http://valid.canardpc.com/show_oc.php?id=1381723

Nahhh, you need to move out and go to the 5Ghz Epic Goodness club. :p

This is my new 24.7:
http://valid.canardpc.com/show_oc.php?id=1373707

[overclocking101]

where is the 5gh club?? i cant find it in search

[JrRacinFan]

where is the 5gh club?? i cant find it in search

Lol I was kidding around with you. Make up a club. :)

[HammerON]

There was a 5GHz club started by (I think) Damulta...

[(FIH) The Don]

got the Q9550 on 4ghz with aircooler

(FIH) The Don|C2Q 9550|4.012GHz|Cooler Master Hyper212 Plus|

http://img.techpowerup.org/100911/06 4.0.jpg

[HammerON]

Bumpage:

http://img.techpowerup.org/101026/Capture617.jpg

[rickss69]

http://i434.photobucket.com/albums/qq69/rickss69/ScreenHunter_01Oct090720.jpg

[HammerON]

This Sabertooth board with the Noctua is a beast!

http://img.techpowerup.org/101027/CPUZ1.jpg

[aCid888*]

I'll join..again... :laugh:

http://img.techpowerup.org/100322/Capture065 4-25.jpg

[HammerON]

I'll join..again... :laugh:

http://img.techpowerup.org/100322/Capture065 4-25.jpg

Nice volts on that Q9950:toast:

[aCid888*]

They are pretty sexeh eh? lol


Thanks. :toast:

[mastrdrver]

This Sabertooth board with the Noctua is a beast!

http://img.techpowerup.org/101027/CPUZ1.jpg

Is there any stability to that?! I don't want to even image the temps when stressing. :twitch:

[LAN_deRf_HA]

LAN_deRf_HA | I7 920 | 4.2 GHz| H70 |
http://img821.imageshack.us/img821/3281/valhm.jpg

[Sir_Real]

My cheapy E5300 still going strong after 2 years running well over 4 gig :)

http://img100.imageshack.us/img100/9088/scorej.jpg

[fullinfusion]

here's mine

http://img.techpowerup.org/101029/heck.jpg

[3volvedcombat]

I'll join..again... :laugh:

http://img.techpowerup.org/100322/Capture065 4-25.jpg

http://img.techpowerup.org/101029/Capture049.jpg

My q9550 gets numbers like that to!

Im running mine at 3.0Ghz under a volt, Im still maxing everygame with this GTX 470

Why do i need 4Ghz! hahhahah

My q9550 at 3.0Ghz at this voltage, Uses the same exact power as a stock q9550 at 2.8Ghz using 1.1volts. So I think im traveling good.

At 2.8ghz, Im stable at .892volts, this chip runs great for me!

[brandonwh64]

Been 4GHz for a long time :)

http://img.techpowerup.org/101029/wprimerun.jpg

[LagunaX]

Not the best i3 but it will do - 4.6ghz over 2 hours prime stable on air:
http://i246.photobucket.com/albums/gg84/jhchang69/i354042ghzprime.jpg

[mastrdrver]

Ugh, those timings make my eyes bleed.

Though, if XBit Labs is right, getting those kind of memory clocks out of a Clarkdale is pretty impressive.

[LagunaX]

Yeah ddr3 2000 at Cas 7 for Clark Kent is pretty good...I just built it so haven't done any fine tuning with the mem yet - maybe I'll try for cas 6...

[JrRacinFan]

I bet if you reduced QPI you might be able to tighten them a touch ;)

[Velvet Wafer]

Yeah ddr3 2000 at Cas 7 for Clark Kent is pretty good...I just built it so haven't done any fine tuning with the mem yet - maybe I'll try for cas 6...

Clarkdale Kentsfield

nice find :P

[Zenith]

Zenith | Q9650 | 4320 | Noctua NH9 |

http://forums.techpowerup.com/attachment.php?attachmentid=38996&stc=1&d=1289954820

And nice undervolting at .984V for 3GHz, I like this chip cause it is running cool under default, but hot as hell overclocked. Noctua 9 isn't on par with this processor. Water cooling here I come. Aiming for 4.5+GHz.

http://forums.techpowerup.com/attachment.php?attachmentid=38997&stc=1&d=1289954820

[lisburnni]

rather simples compared to some on here

http://img638.imageshack.us/img638/4936/14089913.png

Stephen

[LagunaX]

Better ram timings:
http://i246.photobucket.com/albums/gg84/jhchang69/Better1156.jpg

[3volvedcombat]

http://img.techpowerup.org/101126/Capture070154.jpg

My current settings for 24/7. My ram is at 1168Mhz at 5-5-5-15 timings.

So in this screenshot, Im mainly just showing off my overclocked ram a bit :laugh:

[brandonwh64]

Thought id add my HTPC to the 4ghz club :)

http://img.techpowerup.org/101231/x34304ghz.jpg

[HammerON]

http://img.techpowerup.org/110110/Capture016.jpg

http://img.techpowerup.org/110110/542.jpg

[MetalRacer]

Looking good Hammer!:rockout:


http://img.techpowerup.org/110110/Capture071.jpg

[cdawall]

USERNAME | CPU MODEL | SPEED | COOLING |
cdawall | AMD Phenom II X6 1090T | H2O |


CPU Model: AMD Phenom II X6 1090T
CPU Stepping: CCBBE CB 1013CPMW
CPU Frequency: 4579.8 MHz
CPU vCore: 1.55V
CPU Multiplier: 21.5x
CPU Turbo: Disabled
CPU NB Speed: 2982 MHz
HT Ref Speed: 213 MHz
RAM Speed: DDR3-1704
RAM Timings: 7-7-7-20-20-1T
RAM Configuration: 2 x 2GB
RAM vDIMM: 2.14V
Motherboard: ASUS Crosshair III Formula
Chipset/Socket: 790FX + SB750, AM3
Cooling: Water (Fuzion V1)
Temps: 20C Idle / 40C Load
Operating System: Windows 7
32/64-Bit: 64
Stable/Suicide/Untested: Untested

http://img.techpowerup.org/100619/15085sec%20superpi%204582mhz.png

[Velvet Wafer]

USERNAME | CPU MODEL | SPEED | COOLING |
cdawall | AMD Phenom II X6 1090T | H2O |


CPU Model: AMD Phenom II X6 1090T
CPU Stepping: CCBBE CB 1013CPMW
CPU Frequency: 4579.8 MHz
CPU vCore: 1.55V
CPU Multiplier: 21.5x
CPU Turbo: Disabled
CPU NB Speed: 2982 MHz
HT Ref Speed: 213 MHz
RAM Speed: DDR3-1704
RAM Timings: 7-7-7-20-20-1T
RAM Configuration: 2 x 2GB
RAM vDIMM: 2.14V
Motherboard: ASUS Crosshair III Formula
Chipset/Socket: 790FX + SB750, AM3
Cooling: Water (Fuzion V1)
Temps: 20C Idle / 40C Load
Operating System: Windows 7
32/64-Bit: 64
Stable/Suicide/Untested: Untested

http://img.techpowerup.org/100619/15085sec%20superpi%204582mhz.png

looks good,but why do you post it now, if its from june?:)

[Fatal]

FATAL |Core I7 950 (X4) | 4.009 GHZ| AIR H50|

http://img.techpowerup.org/110111/I79502.png

[(FIH) The Don]

(FIH) The Don | i7 920 DO | 4.195 mhz | H2O |
http://img.techpowerup.org/110111/4.195.jpg

[KieX]

Here's the best 24/7 clocks I've ever had :laugh:

KieX | i7 2600K | 4.589 MHz | NH-D14
http://img.techpowerup.org/110115/Capture.jpg

[(FIH) The Don]

one word!

NICE!!!!!



now you just need awzumness water

[HammerON]

Here's the best 24/7 clocks I've ever had :laugh:

KieX | i7 2600K | 4.589 MHz | NH-D14
http://img.techpowerup.org/110115/Capture.jpg

Might have to buy one of these:toast:

Nice clock. Was hoping it would use a lower Vcore though.

[KieX]

Might have to buy one of these:toast:

Nice clock. Was hoping it would use a lower Vcore though.

I was having a problem where lower vcore was stable in windows but as soon as computer is switched off it wouldn't POST. So bumped it up to that in order to make sure it passes POST.

For all out OC seems to hit a wall at 4.8GHz. No matter how much volts I put through it. Thing with Sandybridge is that it's not easy to say if it's CPU or Mobo limited.

[TheMailMan78]

I'm just dropping in to let you all know that I still hate all of you for breaking 4ghz and I can't. When I get a new mobo I'm coming in here and taking over dammit!

[JrRacinFan]

JrRacinFan | x2 555 @ x4 | 4032 MHz | CoolerMaster V8
http://img.techpowerup.org/110116/Capture148.jpg
http://img.techpowerup.org/110116/Capture149.jpghttp://img.techpowerup.org/110116/Capture151.jpg

[HammerON]

I was having a problem where lower vcore was stable in windows but as soon as computer is switched off it wouldn't POST. So bumped it up to that in order to make sure it passes POST.

For all out OC seems to hit a wall at 4.8GHz. No matter how much volts I put through it. Thing with Sandybridge is that it's not easy to say if it's CPU or Mobo limited.

I can't seem to break 4.8 with this i7 970, not yet at least. Still a lot of tweaking to do:)

[Tatty_One]

LMAO, I was looking for an old attachment that I posted years ago, I noticed it was my 5th Anniversary on TPU today! Anyways, I didnt actually realise that members could access every attachment they had ever posted here from a list :o and I came across this old one, overclocking an E6850 from 2007, I disabled one of the 2 cores so I thought I would post it lol...........

Tatty_One|C2D E6850|4.428Gig|Air Scythe Mine Rev 2|

http://forums.techpowerup.com/attachment.php?attachmentid=11057&d=1197333271

Ahhhhh those were the days.... 1.7V on air :)

[HammerON]

Very nice Tatty:toast:

[cheesy999]

cheesy999 | Phenom x4 B55 (unlocked 555) | 4115.44 MHz | Amd Stock cooler

http://valid.canardpc.com/show_oc.php?id=1616366

Though interesting as
Cheap motherboard
Stock cooler
only 1.408v

would go for stable but CPU hits 56'c when testing at 3.6 and i think that's too hot really to do it at 4ghz for 4 hours as since its unlocked x2 tempreture sensors can be wrong by up to 15'c

Just seen most of the parts in mydog's system cost more then my entire computer

[Mydog]

Nice cheesy999:toast:


Mydog | 2x Intel Xeon X5690 | 4811 MHz | Watercooling

Thats 24 threads at 4811 MHz.:D
http://img211.imageshack.us/img211/4023/wprime2095.jpg

And a C 11.5 run at 4737 MHz:)
http://img688.imageshack.us/img688/384/cb2377.jpg

I love my X5690's, they really rock
24/7 WCG stable @4267 MHz
http://img89.imageshack.us/img89/4803/wcg4.jpg

[Zen_]

Zen_ | i5-2500k | 4.6 GHz| Hyper 212+ |

Actually cracked into the 5 GHz club, but this is what I've settled on for my 24/7 OC.

http://i.imgur.com/eWbQp.jpg

[Cold Storm]

Cold Storm | i3-540 | 4.01ghz | Intel Stock cooler


http://img.techpowerup.org/110124/4ghz834.jpg

[TotalChaos]

PII X2 555BE Unlocked stock AMD Cooler

http://img.techpowerup.org/110122/sshot-8.jpg

http://img.techpowerup.org/110124/sshot-4.png

[cheesy999]

Back again

cheesy999 | Phenom x4 B55 (unlocked 555) | 4337.9 MHz | Amd Stock cooler

http://valid.canardpc.com/show_oc.php?id=1618197

If anyone knows any tips on how to get 1 of these higher besides obvious(better cooler,motherboard etc) they would be very helpful - still don't think it will go much higher

also how do you make validator page actually appear on post

[brandonwh64]

Back again

cheesy999 | Phenom x4 B55 (unlocked 555) | 4337.9 MHz | Amd Stock cooler

http://valid.canardpc.com/show_oc.php?id=1618197

If anyone knows any tips on how to get 1 of these higher besides obvious(better cooler,motherboard etc) they would be very helpful - still don't think it will go much higher

also how do you make validator page actually appear on post

Is that thing stable unlocked and at 4.3ghz on a stock cooler? :ohwell:

[cheesy999]

Don't really want to test stability at those setting on stock cooler - seems to run cpu-z well - increasing multipliers or bus will cause a crash though

[brandonwh64]

Hmm well once you test 4GHZ stable on a good cooler then post a SS. i like to see these 555 C3 chips unlock

[cheesy999]

Only 2 cooler i have at moment are stock 555 cooler and a stock 4200+ cooler may get a freezer 7 or 13 soon though - unfortunately just spent money on CD's

[brandonwh64]

AC freezer 7 sux, get a 212+ or a core contact freezer! both same price at the AC freezer 7 but 10x better

[cheesy999]

will eventually get hyper 212 then - since i have no money at the moment may be a month or 2 though - also is it worth getting second fan

will lapping heatsink and using my own thermal paste help - i have been told doing so can drop more then 5'c of temps (lapping the heatsink not thermal paste)

also how is this heatsink Inno3D iChill XXXX Socket Intel 1366 1156 1155 775... (http://www.ebuyer.com/product/244150)

[brandonwh64]

I wouldnt bother on the stock heatsink, i know the copper heatpipe version works for small OCs but lapping it wouldnt help much

[cheesy999]

Decided to do occt stability test - Cpu appears to be stable however it starts to thermal throttle :( after a while back down to 3ghz so as previously thought better cooling will be needed - only thing i could do at the moment is add more fans and i dont think you can have more then 1 fan on the stock heatsink.

Fully stable during Crysis though and thats all that matter for everyday use

[LagunaX]

5.0ghz hits 89c on air for me with this chip so I settled for 4.9ghz for 24/7:
http://i246.photobucket.com/albums/gg84/jhchang69/Capture3.jpg

[Zenith]

Zenith | P4 631 | 4.994 GHZ| Xillence|

http://forums.techpowerup.com/attachment.php?attachmentid=40670&stc=1&d=1297804275

I wonder if I could go even with higher voltage? But would need better cooling.

http://valid.canardpc.com/show_oc.php?id=1657915