• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

SilverStone Launches SST Clear CMOS Button for Everyone

panchoman

Sold my stars!
Joined
Jul 16, 2007
Messages
9,595 (1.58/day)
Processor Amd Athlon X2 4600+ Windsor(90nm) EE(65W) @2.9-3.0 @1.45
Motherboard Biostar Tforce [Nvidia] 550
Cooling Thermaltake Blue Orb-- bunch of other fans here and there....
Memory 2 gigs (2x1gb) of patriot ddr2 800 @ 4-4-4-12-2t
Video Card(s) Sapphire X1950pro Pci-E x16 @stock@stock on stock
Storage Seagate 7200.11 250gb Drive, WD raptors (30/40) in Raid 0
Display(s) ANCIENT 15" sony lcd, bought it when it was like 500 bucks
Case Apevia X-plorer blue/black
Audio Device(s) Onboard- Why get an sound card when you can hum??
Power Supply Antec NeoHe 550-manufactured by seasonic -replacement to the discontinued smart power series
Software Windows XP pro SP2 -- vista is still crap
in a pic yes, but in reality its a PITA to get to with even a dual slot card, but I do think we may be drifting a bit off topic...slightly!?!?!

Case and point....find the jumper....lol http://img137.imageshack.us/img137/5334/p1010159js7.jpg

i'd easily find it if you gave me another angle.. its almost 1/2 of the bios battery visible, and with another angle, i could find that jumper, which is on top of the battery, and a little to the right.
 

Wile E

Power User
Joined
Oct 1, 2006
Messages
24,318 (3.81/day)
System Name The ClusterF**k
Processor 980X @ 4Ghz
Motherboard Gigabyte GA-EX58-UD5 BIOS F12
Cooling MCR-320, DDC-1 pump w/Bitspower res top (1/2" fittings), Koolance CPU-360
Memory 3x2GB Mushkin Redlines 1600Mhz 6-8-6-24 1T
Video Card(s) Evga GTX 580
Storage Corsair Neutron GTX 240GB, 2xSeagate 320GB RAID0; 2xSeagate 3TB; 2xSamsung 2TB; Samsung 1.5TB
Display(s) HP LP2475w 24" 1920x1200 IPS
Case Technofront Bench Station
Audio Device(s) Auzentech X-Fi Forte into Onkyo SR606 and Polk TSi200's + RM6750
Power Supply ENERMAX Galaxy EVO EGX1250EWT 1250W
Software Win7 Ultimate N x64, OSX 10.8.4
About jumper placement, my ECS KA3-MVP had terrible jumper placement. If I had my audio card installed, I had to use a pair of needle nosed pliers to get to it. Wish I would've thought of this back then.
 

panchoman

Sold my stars!
Joined
Jul 16, 2007
Messages
9,595 (1.58/day)
Processor Amd Athlon X2 4600+ Windsor(90nm) EE(65W) @2.9-3.0 @1.45
Motherboard Biostar Tforce [Nvidia] 550
Cooling Thermaltake Blue Orb-- bunch of other fans here and there....
Memory 2 gigs (2x1gb) of patriot ddr2 800 @ 4-4-4-12-2t
Video Card(s) Sapphire X1950pro Pci-E x16 @stock@stock on stock
Storage Seagate 7200.11 250gb Drive, WD raptors (30/40) in Raid 0
Display(s) ANCIENT 15" sony lcd, bought it when it was like 500 bucks
Case Apevia X-plorer blue/black
Audio Device(s) Onboard- Why get an sound card when you can hum??
Power Supply Antec NeoHe 550-manufactured by seasonic -replacement to the discontinued smart power series
Software Windows XP pro SP2 -- vista is still crap
wow, this makes my biostar feel very good :D
 
Joined
Jul 18, 2007
Messages
2,693 (0.44/day)
System Name panda
Processor 6700k
Motherboard sabertooth s
Cooling raystorm block<black ice stealth 240 rad<ek dcc 18w 140 xres
Memory 32gb ripjaw v
Video Card(s) 290x gamer<ntzx g10<antec 920
Storage 950 pro 250gb boot 850 evo pr0n
Display(s) QX2710LED@110hz lg 27ud68p
Case 540 Air
Audio Device(s) nope
Power Supply 750w superflower
Mouse g502
Keyboard shine 3 with grey, black and red caps
Software win 10
Benchmark Scores http://hwbot.org/user/marsey99/
this deserves an award, its about time you can buy these as i have broke 2 i made.

:toast:
 

jbunch07

New Member
Joined
Feb 22, 2008
Messages
5,260 (0.90/day)
Location
Chattanooga,TN
Processor i5-2500k
Motherboard ASRock z68 pro3-m
Cooling Corsair A70
Memory Kingston HyperX 8GB 2 x 4GB 1600mhz
Storage OCZ Agility3 60GB(boot) 2x320GB Raid0(storage)
Display(s) Samsung 24" 1920x1200
Case Custom
Power Supply PC Power and Cooling 750w
Software Win 7 x64
Very good idea! I more than likely will be investing in one of those. :)
 
Joined
Oct 19, 2007
Messages
8,182 (1.36/day)
Processor Intel i9 9900K @5GHz w/ Corsair H150i Pro CPU AiO w/Corsair HD120 RBG fan
Motherboard Asus Z390 Maximus XI Code
Cooling 6x120mm Corsair HD120 RBG fans
Memory Corsair Vengeance RBG 2x8GB 3600MHz
Video Card(s) Asus RTX 3080Ti STRIX OC
Storage Samsung 970 EVO Plus 500GB , 970 EVO 1TB, Samsung 850 EVO 1TB SSD, 10TB Synology DS1621+ RAID5
Display(s) Corsair Xeneon 32" 32UHD144 4K
Case Corsair 570x RBG Tempered Glass
Audio Device(s) Onboard / Corsair Virtuoso XT Wireless RGB
Power Supply Corsair HX850w Platinum Series
Mouse Logitech G604s
Keyboard Corsair K70 Rapidfire
Software Windows 11 x64 Professional
Benchmark Scores Firestrike - 23520 Heaven - 3670
i mean sure, sometimes my board doesn't recover from somethings that like atrociously horrible, but seriously, for most people, how long does it take to open their case panels with thumb screws and move a jumper?

thats why i was saying, this thing makes it sound like people have to reset the cmos 10 times a day..

oh and btw, move the jumper, it does a better job then taking out the battery.

Depends on where the jumper is at and how much crap is in the way. Id rather flip a switch on the back of my computer than dig inside my case 300+ times while going OC crazy.
 

Mussels

Freshwater Moderator
Staff member
Joined
Oct 6, 2004
Messages
58,413 (8.22/day)
Location
Oystralia
System Name Rainbow Sparkles (Power efficient, <350W gaming load)
Processor Ryzen R7 5800x3D (Undervolted, 4.45GHz all core)
Motherboard Asus x570-F (BIOS Modded)
Cooling Alphacool Apex UV - Alphacool Eisblock XPX Aurora + EK Quantum ARGB 3090 w/ active backplate
Memory 2x32GB DDR4 3600 Corsair Vengeance RGB @3866 C18-22-22-22-42 TRFC704 (1.4V Hynix MJR - SoC 1.15V)
Video Card(s) Galax RTX 3090 SG 24GB: Underclocked to 1700Mhz 0.750v (375W down to 250W))
Storage 2TB WD SN850 NVME + 1TB Sasmsung 970 Pro NVME + 1TB Intel 6000P NVME USB 3.2
Display(s) Phillips 32 32M1N5800A (4k144), LG 32" (4K60) | Gigabyte G32QC (2k165) | Phillips 328m6fjrmb (2K144)
Case Fractal Design R6
Audio Device(s) Logitech G560 | Corsair Void pro RGB |Blue Yeti mic
Power Supply Fractal Ion+ 2 860W (Platinum) (This thing is God-tier. Silent and TINY)
Mouse Logitech G Pro wireless + Steelseries Prisma XL
Keyboard Razer Huntsman TE ( Sexy white keycaps)
VR HMD Oculus Rift S + Quest 2
Software Windows 11 pro x64 (Yes, it's genuinely a good OS) OpenRGB - ditch the branded bloatware!
Benchmark Scores Nyooom.
Pity so many boards these days have a simple 2 pin CMOS clear....

oh well, a handy tool nonetheless :)
 
Joined
Nov 15, 2005
Messages
1,007 (0.15/day)
Processor 2500K @ 4.5GHz 1.28V
Motherboard ASUS P8P67 Deluxe
Cooling Corsair A70
Memory 8GB (2x4GB) Corsair Vengeance 1600 9-9-9-24 1T
Video Card(s) eVGA GTX 470
Storage Crucial m4 128GB + Seagate RAID 1 (1TB x 2)
Display(s) Dell 22" 1680x1050 nothing special
Case Antec 300
Audio Device(s) Onboard
Power Supply PC Power & Cooling 750W
Software Windows 7 64bit Pro
Joined
Jan 2, 2008
Messages
3,296 (0.56/day)
System Name Thakk
Processor i7 6700k @ 4.5Ghz
Motherboard Gigabyte G1 Z170N ITX
Cooling H55 AIO
Memory 32GB DDR4 3100 c16
Video Card(s) Zotac RTX3080 Trinity
Storage Corsair Force GT 120GB SSD / Intel 250GB SSD / Samsung Pro 512 SSD / 3TB Seagate SV32
Display(s) Acer Predator X34 100hz IPS Gsync / HTC Vive
Case QBX
Audio Device(s) Realtek ALC1150 > Creative Gigaworks T40 > AKG Q701
Power Supply Corsair SF600
Mouse Logitech G900
Keyboard Ducky Shine TKL MX Blue + Vortex PBT Doubleshots
Software Windows 10 64bit
Benchmark Scores http://www.3dmark.com/fs/12108888
Someone shouldve thought about this several years ago..
 

OnBoard

New Member
Joined
Sep 16, 2006
Messages
3,033 (0.47/day)
Location
Finland
Processor Core i5-750 @ 3.6GHz 1.136V 24/7
Motherboard Gigabyte P55A-UD3, SATA 6Gbit/s & USB3.0 baby!
Cooling Alpenföhn Brocken HeatpipeDirectTouch
Memory Geil Ultra Series 4GB 2133MHz DDR3 @ 1440MHz 7-7-7-24
Video Card(s) Gigabyte GTX 460 1GB OC (mostly stock speeds)
Storage OS: Samsung F3 500GB Games: Samsung F1 640GB
Display(s) new! Samsung P2350 23" FullHD 2ms / Mirai DTL-632E500 32" LCD
Case new! Xigmatek Midgard/Utgard side window with red cathodes, 1x140mm & 3x120mm fans
Audio Device(s) new! ASUS Xonar DG & JVC HA-RX700 headphones
Power Supply Cougar CM 700W Modular
Software Windows 7 Home Premium x64
Benchmark Scores Logitech UltraX Premium & G5 laser v2 + Ulti-mat Breathe X2 for fragging
Pity so many boards these days have a simple 2 pin CMOS clear....

oh well, a handy tool nonetheless :)

It works in those too. Center pin is always connected it just switches the side one. So the connected side is hanging in the air while the other 2 are connected to the clear CMOS.

edit: doh, it's already designed for 2 pin use too :D Might just be that you have to connect the white and yellow wires and not the red/white part if you want the normal to be normal and not clear position. (or just change the wire positions, very easy)


In fact this would be more useful to those 2pin mobos like mine, as there is no jumper to begin with and shorting it with something metal is ghetto :) Although I didn't have any use for clearing CMOS is my previous motherboard and this one knows how to start after unsuccessful OC too. And for bios update load optimized defaults works fine.
 
Joined
Jul 31, 2006
Messages
95 (0.01/day)
Location
Paraguay
OMG! I can belive howsimple is this artifact, the ugly Clear C-MOS had been there like forever, why no boy ever came with this idea!

I want one, and stop droping the jumper when y try to put it back so i wont be shacking my case upside down to bring it down.
 

Weer

New Member
Joined
Aug 15, 2007
Messages
1,417 (0.23/day)
Location
New York / Israel
System Name //////////////////////////////////////Crunching/Folding Builds\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\
Processor Q8400@ 4.0Ghz | Q6600 @ 3.6Ghz | E7300 @ 3.8Ghz | E5300 @ 4.3Ghz | E5300 @ 3.9Ghz | E2180 @ 2.0Ghz |
Motherboard ASUS P5Q-E | Asus P5Q Pro | Gigabyte EG45-DS2H | Gigabyte EP35-DS3H | Gigabyte NV73 | E-Sonic P35-G
Cooling TRUE [Lapped] | TRUE | Thermalright SI-128 | Stock | Stock | Stock
Memory G.Skill 8192MB @ 1066Mhz | G.Skill 4096MB | OCZ 2048MB | G.Skill 2048MB | PNY 2048MB | OCZ 1024MB
Video Card(s) GTX 280 + 8800 GTS 512 | 9800 GX2 + 8800 GTS 512 | 6600 GT | 8800 GS | 9600 GSO 512
Storage G.Skill 64GB SSD (OS) | Segate 750GB [Downloads] | 5TB JBOD [Movies] | 3TB JBOD [Else] | 1.5TB [Ex]
Display(s) QUAD Monitors: Dell 2007FP [20"] + Dell 3007WFP-HC [30"] + Dell 2007FP [20"] | Dell 2407WFP-HC [24"]
Case Antec P190 | Antec Three-Hundred | Antec NSK2400 | Thermaltake Strike MX | HEC 6T10 | HEC 8K01
Audio Device(s) Creative X-Fi XtremeGamer PCI + [Audiophile HD600] + [Creative G500 + Logitech X-530 = 10 speakers]
Power Supply OCZ 750w [62A] | OCZ 750w [62A] | Antec 380w [31A] | Antec 650w [54A] | OCZ 400w [33A] | GeN [20A]
Software Windows 7 Ultimate 64-bit + Windows XP 64-bit | Windows Vista SP2 64-bit | Windows 7 RTM 64-bit
Benchmark Scores ////////////////////////////////66,666 [Crunching] + 45,455 [Folding]\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\
You do not have to have more exhaust power than intake power. Both methods have their pros and cons.

Assuming the other method is having more intake or equal amounts of both, you are wrong.
There is no pro to having more air coming into the case, heating up and having no place to go. There is also no pro to having just as much air coming into the case as getting out, because cold air will get sucked into the case from any tiny spec of a hole.
Thus, the only method worthy is to have more exhaust than intake. Hopefully now you understand ;)
 

Mussels

Freshwater Moderator
Staff member
Joined
Oct 6, 2004
Messages
58,413 (8.22/day)
Location
Oystralia
System Name Rainbow Sparkles (Power efficient, <350W gaming load)
Processor Ryzen R7 5800x3D (Undervolted, 4.45GHz all core)
Motherboard Asus x570-F (BIOS Modded)
Cooling Alphacool Apex UV - Alphacool Eisblock XPX Aurora + EK Quantum ARGB 3090 w/ active backplate
Memory 2x32GB DDR4 3600 Corsair Vengeance RGB @3866 C18-22-22-22-42 TRFC704 (1.4V Hynix MJR - SoC 1.15V)
Video Card(s) Galax RTX 3090 SG 24GB: Underclocked to 1700Mhz 0.750v (375W down to 250W))
Storage 2TB WD SN850 NVME + 1TB Sasmsung 970 Pro NVME + 1TB Intel 6000P NVME USB 3.2
Display(s) Phillips 32 32M1N5800A (4k144), LG 32" (4K60) | Gigabyte G32QC (2k165) | Phillips 328m6fjrmb (2K144)
Case Fractal Design R6
Audio Device(s) Logitech G560 | Corsair Void pro RGB |Blue Yeti mic
Power Supply Fractal Ion+ 2 860W (Platinum) (This thing is God-tier. Silent and TINY)
Mouse Logitech G Pro wireless + Steelseries Prisma XL
Keyboard Razer Huntsman TE ( Sexy white keycaps)
VR HMD Oculus Rift S + Quest 2
Software Windows 11 pro x64 (Yes, it's genuinely a good OS) OpenRGB - ditch the branded bloatware!
Benchmark Scores Nyooom.
Thus, the only method worthy is to have more exhaust than intake. Hopefully now you understand ;)

That method causes excessive dust build up, and ruins airFLOW.

A properly setup case with airflow, does not suffer dust problems and gets the air in and out, passing over the needed areas and leaving.

Your method could well suck air in from the sides, ruin the flow and have it totally bypass hot components in the case.
 

Wile E

Power User
Joined
Oct 1, 2006
Messages
24,318 (3.81/day)
System Name The ClusterF**k
Processor 980X @ 4Ghz
Motherboard Gigabyte GA-EX58-UD5 BIOS F12
Cooling MCR-320, DDC-1 pump w/Bitspower res top (1/2" fittings), Koolance CPU-360
Memory 3x2GB Mushkin Redlines 1600Mhz 6-8-6-24 1T
Video Card(s) Evga GTX 580
Storage Corsair Neutron GTX 240GB, 2xSeagate 320GB RAID0; 2xSeagate 3TB; 2xSamsung 2TB; Samsung 1.5TB
Display(s) HP LP2475w 24" 1920x1200 IPS
Case Technofront Bench Station
Audio Device(s) Auzentech X-Fi Forte into Onkyo SR606 and Polk TSi200's + RM6750
Power Supply ENERMAX Galaxy EVO EGX1250EWT 1250W
Software Win7 Ultimate N x64, OSX 10.8.4
Assuming the other method is having more intake or equal amounts of both, you are wrong.
There is no pro to having more air coming into the case, heating up and having no place to go. There is also no pro to having just as much air coming into the case as getting out, because cold air will get sucked into the case from any tiny spec of a hole.
Thus, the only method worthy is to have more exhaust than intake. Hopefully now you understand ;)
lol. I find it amusing that you think you have the answer to this locked up. Then tell me, why, in my Stacker 830, did having more intake air coming in than leaving, did I get better temps on my chipsets and gfx cards (to the order of 2-3C under load), all at the same ambient temperature?

All those little holes that can let air enter in a negative pressure case, can also let air exit in a positive pressure case. ;)

Using negative pressure is by no means the best for everyone in all situations. Both have pros and cons, and both methods vary depending upon your case setup. There have been many threads about this around here comparing both methods. Neither is better in all situations.

Seriously, start doing research on things before you come into threads trying to state claims as fact.
 

panchoman

Sold my stars!
Joined
Jul 16, 2007
Messages
9,595 (1.58/day)
Processor Amd Athlon X2 4600+ Windsor(90nm) EE(65W) @2.9-3.0 @1.45
Motherboard Biostar Tforce [Nvidia] 550
Cooling Thermaltake Blue Orb-- bunch of other fans here and there....
Memory 2 gigs (2x1gb) of patriot ddr2 800 @ 4-4-4-12-2t
Video Card(s) Sapphire X1950pro Pci-E x16 @stock@stock on stock
Storage Seagate 7200.11 250gb Drive, WD raptors (30/40) in Raid 0
Display(s) ANCIENT 15" sony lcd, bought it when it was like 500 bucks
Case Apevia X-plorer blue/black
Audio Device(s) Onboard- Why get an sound card when you can hum??
Power Supply Antec NeoHe 550-manufactured by seasonic -replacement to the discontinued smart power series
Software Windows XP pro SP2 -- vista is still crap
Assuming the other method is having more intake or equal amounts of both, you are wrong.
There is no pro to having more air coming into the case, heating up and having no place to go. There is also no pro to having just as much air coming into the case as getting out, because cold air will get sucked into the case from any tiny spec of a hole.
Thus, the only method worthy is to have more exhaust than intake. Hopefully now you understand ;)

i beg to differ. you get bad airflow because the exhaust fans have to create a crappy vaccumm, and the fans in the back of your case have to suck in air from the front of your case.. this causes dust buildup and horrible horrible airflow. its better to have a balanced flow, where the case is plentiful of air from the intake fans, which throw cool air on the hot components, and the exhaust fans blow out the hot air. if you must pick one, pick intake, because atleast you'll have cool air thats filling the case and cooling the components, the hot air will escape through the vents automatically.
 

eidairaman1

The Exiled Airman
Joined
Jul 2, 2007
Messages
40,435 (6.62/day)
Location
Republic of Texas (True Patriot)
System Name PCGOD
Processor AMD FX 8350@ 5.0GHz
Motherboard Asus TUF 990FX Sabertooth R2 2901 Bios
Cooling Scythe Ashura, 2×BitFenix 230mm Spectre Pro LED (Blue,Green), 2x BitFenix 140mm Spectre Pro LED
Memory 16 GB Gskill Ripjaws X 2133 (2400 OC, 10-10-12-20-20, 1T, 1.65V)
Video Card(s) AMD Radeon 290 Sapphire Vapor-X
Storage Samsung 840 Pro 256GB, WD Velociraptor 1TB
Display(s) NEC Multisync LCD 1700V (Display Port Adapter)
Case AeroCool Xpredator Evil Blue Edition
Audio Device(s) Creative Labs Sound Blaster ZxR
Power Supply Seasonic 1250 XM2 Series (XP3)
Mouse Roccat Kone XTD
Keyboard Roccat Ryos MK Pro
Software Windows 7 Pro 64
probably fabricate one for way less.
 

alexp999

Staff
Joined
Jul 28, 2007
Messages
8,012 (1.32/day)
Location
Dorset, UK
System Name Gaming Rig | Uni Laptop
Processor Intel Q6600 G0 (2007) @ 3.6Ghz @ 1.45625v (LLC) / 4 GHz Bench @ 1.63v | AMD Turion 64 X2 TL-62 2 GHz
Motherboard ASUS P5Q Deluxe (Intel P45) | HP 6715b
Cooling Xigmatek Dark Knight w/AC MX2 ~ Case Fans: 2 x 180mm + 1 x 120mm Silverstone Fans
Memory 4GB OCZ Platinum PC2-8000 @ 1000Mhz 5-5-5-15 2.1v | 2 x 1GB DDR2 667 MHz
Video Card(s) XFX GTX 285 1GB, Modded FTW BIOS @ 725/1512/1350 w/Accelero Xtreme GTX 280 + Scythe sinks| ATI X1250
Storage 2x WD6400AAKS 1 TB Raid 0, 140GB Raid 1 & 80GB Maxtor Basics External HDD (storage) | 160GB 2.5"
Display(s) Samsung SyncMaster SM2433BW @ 1920 x 1200 via DVI-D | 15.4" WSXGA+ (1680 x 1050 resolution)
Case Silverstone Fortress FT01B-W ~ Logitech G15 R1 / Microsoft Laser Mouse 6000
Audio Device(s) Soundmax AD2000BX Onboard Sound, via Logitech X-230 2.1 | ADI SoundMAX HD Audio
Power Supply Corsair TX650W | HP 90W
Software Windows 7 Ultimate Build 7100 x64 | Windows 7 Ultimate Build 7100 x64
Benchmark Scores 3DM06: 19519, Vantage: P16170 ~ Win7: -CPU 7.5 -MEM 7.5 -AERO 7.9 -GFX 6.0 -HDD 6.0
just to put my 2p, into the exhaust/intake discussion. On my last case, I had 2x120mm intakes and 1x120mm exhaust. I got loads of dust was damn annoying. On this case, I have 2x120mm intake on 6v, and one 140mm intake on 12v, then 2x140mm exhausts on 12v, and a 120mm exhaust on 12v. (from what I worked out, I have more air pulling out than in), and I get virtually no dust now! :D
I think, case design, fan design, fan location, hardware location plays an important role, but probably the best method is to experiment, and see whats best for you.
Oh yeah, and with my gfx card in my new case and fan setup, gave me a 5-10*C drop in GPU temps :rockout:
 
Joined
Apr 21, 2008
Messages
5,250 (0.90/day)
Location
IRAQ-Baghdad
System Name MASTER
Processor Core i7 3930k run at 4.4ghz
Motherboard Asus Rampage IV extreme
Cooling Corsair H100i
Memory 4x4G kingston hyperx beast 2400mhz
Video Card(s) 2X EVGA GTX680
Storage 2X Crusial M4 256g raid0, 1TbWD g, 2x500 WD B
Display(s) Samsung 27' 1080P LED 3D monitior 2ms
Case CoolerMaster Chosmos II
Audio Device(s) Creative sound blaster X-FI Titanum champion,Creative speakers 7.1 T7900
Power Supply Corsair 1200i, Logitch G500 Mouse, headset Corsair vengeance 1500
Software Win7 64bit Ultimate
Benchmark Scores 3d mark 2011: testing
it is cool , but almost new mobo's now have reset switch
 

OnBoard

New Member
Joined
Sep 16, 2006
Messages
3,033 (0.47/day)
Location
Finland
Processor Core i5-750 @ 3.6GHz 1.136V 24/7
Motherboard Gigabyte P55A-UD3, SATA 6Gbit/s & USB3.0 baby!
Cooling Alpenföhn Brocken HeatpipeDirectTouch
Memory Geil Ultra Series 4GB 2133MHz DDR3 @ 1440MHz 7-7-7-24
Video Card(s) Gigabyte GTX 460 1GB OC (mostly stock speeds)
Storage OS: Samsung F3 500GB Games: Samsung F1 640GB
Display(s) new! Samsung P2350 23" FullHD 2ms / Mirai DTL-632E500 32" LCD
Case new! Xigmatek Midgard/Utgard side window with red cathodes, 1x140mm & 3x120mm fans
Audio Device(s) new! ASUS Xonar DG & JVC HA-RX700 headphones
Power Supply Cougar CM 700W Modular
Software Windows 7 Home Premium x64
Benchmark Scores Logitech UltraX Premium & G5 laser v2 + Ulti-mat Breathe X2 for fragging
Joined
Oct 19, 2007
Messages
8,182 (1.36/day)
Processor Intel i9 9900K @5GHz w/ Corsair H150i Pro CPU AiO w/Corsair HD120 RBG fan
Motherboard Asus Z390 Maximus XI Code
Cooling 6x120mm Corsair HD120 RBG fans
Memory Corsair Vengeance RBG 2x8GB 3600MHz
Video Card(s) Asus RTX 3080Ti STRIX OC
Storage Samsung 970 EVO Plus 500GB , 970 EVO 1TB, Samsung 850 EVO 1TB SSD, 10TB Synology DS1621+ RAID5
Display(s) Corsair Xeneon 32" 32UHD144 4K
Case Corsair 570x RBG Tempered Glass
Audio Device(s) Onboard / Corsair Virtuoso XT Wireless RGB
Power Supply Corsair HX850w Platinum Series
Mouse Logitech G604s
Keyboard Corsair K70 Rapidfire
Software Windows 11 x64 Professional
Benchmark Scores Firestrike - 23520 Heaven - 3670
Just the top of the spec ones. Not in any mainstream or cheap boards.
And its still on the motherboard where you have to take the side panel off anyway. This switch makes it so that you dont have to do that.
 
Top