Saakki
New Member
- Joined
- Mar 3, 2008
- Messages
- 301 (0.05/day)
- Location
- Finland
System Name | JGG |
---|---|
Processor | Q6600 @ 3,4ghz |
Motherboard | Rampage Formula |
Cooling | Xigmatek, Nexus |
Memory | 1100 mhz Pi |
Video Card(s) | 6950 + Accelero Xtreme Plus |
Storage | 1tb+1tb |
Display(s) | Acer 19" LCD 5ms + 17 " Hitachi |
Case | Fractal Design Define R2 |
Audio Device(s) | X-FI |
Power Supply | XFX Core 650 |
Software | Win 7 ultimate x64 |
Benchmark Scores | Q6600 @ 3.5 ghz + and 6950 @ 6970 + |
Hello fellas! I got this "maybe works or maybe works not" GFX card for few bux.. its this club 3d model http://www.techpowerup.com/vgabios/4578/Club3D.7900GTX.512.060216.html
..card works "fine" but right from the beginning it gives these small artifacts around the screen, like dead pixels..different colours etc..so my bet is that this card is almost dead and i should just rip the humongous cooling system out and make something usable out of it.. or whats your opinion?
I didnt bother to install driver since those artifacts were there right from beginning of start up. I have Antec 500w earthwatts PSU, so its not a problem and this card was also tested with other system.. any luck if i reflash bios or something? Ty for your comments .
..card works "fine" but right from the beginning it gives these small artifacts around the screen, like dead pixels..different colours etc..so my bet is that this card is almost dead and i should just rip the humongous cooling system out and make something usable out of it.. or whats your opinion?
I didnt bother to install driver since those artifacts were there right from beginning of start up. I have Antec 500w earthwatts PSU, so its not a problem and this card was also tested with other system.. any luck if i reflash bios or something? Ty for your comments .
Last edited: