- Joined
- Feb 11, 2008
- Messages
- 607 (0.10/day)
- Location
- Omaha, Nebraska, USA
System Name | Built By Me |
---|---|
Processor | Intel Core i9 9900K @ 5.1 GHz |
Motherboard | Gigabyte Z390 Aorus Ultra |
Cooling | Custom Water Cooling - CPU Only |
Memory | 32GB (2 x 16) GSkill Ripjaws V DDR4 |
Video Card(s) | RTX 4080 - ASUS ROG Strix 16GB OC - P Mode |
Storage | 1TB Samsung 970 Evo NVMe |
Display(s) | Alienware AW2723DF @ 280 Hz @ 1440P |
Case | Fractal Design Define S2 |
Audio Device(s) | Corsair Virtuoso Pro |
Power Supply | 850W Seasonic Platinum |
Mouse | Razer Viper V2 Pro @ 2k Hz |
Keyboard | Asus ROG Strix Scope II 96 Wireless - ROG NX Snow Switches |
Software | Windows 11 Pro |
I have just finished purchasing everything that I need to set up my new watercooling system. This is what I have:
Here are my questions:
- Core i7 920
- Antec 1200
- Swiftech Apogee GTZ w/ LGA1366 Mounting Kit
- Swiftech MCP655 Pump
- Swiftech MCR-220 Radiator
- Swiftech MCRES-Micro Rev2
- (2x) 120mm Scythe 110.31 CFM @ 37 dB Fans
- 12' Tygon 1/2" ID Tubing
- Artic Cooling MX-2 TIM
- Swiftech HydrX Coolant
- Swiftech MCB-120 Radbox Rev2
- 10 Hose Clamps
Here are my questions:
- Is the placement of everything correct?
- When I do my leak test, and actually apply the setup, do I just put the water in the reservoir and start the pump?
- How do I "bleed" the air out of the loop?