KH0UJ
New Member
- Joined
- Feb 22, 2009
- Messages
- 361 (0.07/day)
- Location
- Cebu City Philippines
System Name | Air Cooled Gaming / Shop PC |
---|---|
Processor | AMD Athlon II X2 Regor 250 |
Motherboard | Asus M4A78 plus |
Cooling | Air Cooled (Upward Airflow) |
Memory | Corsair Dominator PC-8500 2GB 1066 MHZ |
Video Card(s) | Palit GTS 250 E-Green |
Storage | Hitachi Deskstar 160 GB |
Display(s) | Samsung EX2020 20 inch LED |
Case | Wooden Case Painted and Modified |
Audio Device(s) | Realtek ALC887 8 Channel (Onboard) |
Power Supply | Orion HP 585D X2 Dual Modified PSU (585W+585W) |
Software | Windows XP SP3 / Windows 7 32 bit |
I swiched back to 6 pin connectors on the video card cause on my test soldering the wires and using the connectors plus the contact compound is just equal so to have a more convenience I returned back the connectors, but putting back the connectors without the contact compound had a very slight drop, (12.13 volts to 12.12 volts) so 0.01 volts drop on the PCB points which is I know its just tolerable but I just wanna be sure on my connectors to have a very good contact specially im using a mini A/C to cool my gaming rig connector couplings tends to shrink when it experiences cold air.
On the last pic is 12.15 volts after half a second it goes back to 12.13 volts, it occurs when I suddenly stop the Orthos test, I think I need to use a more responsive crowbar circuit cause it tends to function a millisecond late but at least it functions the way I wanted it to be only thing is its a bit laggy, sudden load is no problem, no voltage fluctuation, no noise generation, no nothing, but when I suddenly stop the high ampere test it blinks 12.15 volts then goes to 12.13 volts again