• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

5GHz wlan card?

Joined
Apr 29, 2006
Messages
5,105 (0.78/day)
Location
Sydney, Australia
System Name UltraPC
Processor E8500 Core 2 Duo, 1333Mhz FSB, 3.16Ghz @ 4.5GHz (got into Windows @ 4.75GHz)
Motherboard ASUS P5Q-e
Cooling CPU Cooler - TT V14 Pro, 2x120mm CM Blue LED fans, 1x90mm CM Blue LED fan
Memory G.Skill Pi 4GB (2x2GB) Dual Channel DDR2 PC8000 (1000MHz), 5-5-5-15
Video Card(s) Sapphire HD4850 512mb with ASUS EAH4850 BIOS
Storage 2x 500GB Seagate 7200.12 Raid 0
Display(s) Acer AL1912, 19" LCD screen
Case Thermaltake Soprano Black ATX case
Audio Device(s) Onboard 7.1, Speakers - 5 + Sub + Monitor speakers
Power Supply Thermaltake 850W Toughpower Cable Management - Quad (2x18A and 2x30A) 12V rails
Software Win 7 Pro x64, MSN, CS:Source, etc etc
I got a WRT610n dual band router.

Now the laptops have G cards in them. The media PC has an N Card (Dlink DWA-556 Xtreme N).

I tried connecting the media pc to the N network but it doesnt work. Ie, I have two networks from the WRT610n; a N network and G network. The wlan card can only pick up the G network.

Now reading specs on the dlink site, it says the range is only 2.4-2.48GHz. I thought N cards were 2.4 and 5Ghz capable...or am I wrong?
 
Last edited:

Sonido

New Member
Joined
Aug 25, 2008
Messages
356 (0.06/day)
Location
USA
System Name Sonido
Processor E6600 @ 3.20 GHz (1600 FSB)
Motherboard abit IX38 QuadGT
Cooling Tt SpinQ (load @ 29c)
Memory TopRam SpeedRAM A.K.A "El Cheapo" @ 800 MHz
Video Card(s) Diamond HD 4870 (@ Stock)
Storage Primary: 500 GB WD
Display(s) 32" Samsung 1080p HDTV
Case Antec Twelve hundred (Modded Tri-cool fans)
Audio Device(s) On-board HD Audio
Power Supply 700W Rocketfish
Software Vista\7\Linux\Hackintosh
In the final draft of the spec, it is. It will be done by the end of this year.

Edit: You have an early draft-N card. Only 2.4 GHz... no soup, er... I mean 5 for you!
 
Last edited:
Joined
Apr 29, 2006
Messages
5,105 (0.78/day)
Location
Sydney, Australia
System Name UltraPC
Processor E8500 Core 2 Duo, 1333Mhz FSB, 3.16Ghz @ 4.5GHz (got into Windows @ 4.75GHz)
Motherboard ASUS P5Q-e
Cooling CPU Cooler - TT V14 Pro, 2x120mm CM Blue LED fans, 1x90mm CM Blue LED fan
Memory G.Skill Pi 4GB (2x2GB) Dual Channel DDR2 PC8000 (1000MHz), 5-5-5-15
Video Card(s) Sapphire HD4850 512mb with ASUS EAH4850 BIOS
Storage 2x 500GB Seagate 7200.12 Raid 0
Display(s) Acer AL1912, 19" LCD screen
Case Thermaltake Soprano Black ATX case
Audio Device(s) Onboard 7.1, Speakers - 5 + Sub + Monitor speakers
Power Supply Thermaltake 850W Toughpower Cable Management - Quad (2x18A and 2x30A) 12V rails
Software Win 7 Pro x64, MSN, CS:Source, etc etc
In the final draft of the spec, it is. It will be done by the end of this year.

Edit: You have an early draft-N card. Only 2.4 GHz... no soup, er... I mean 5 for you!

Wow, thats sh*t lol. Why did I spend money on this dual band router then :p.
 

Sonido

New Member
Joined
Aug 25, 2008
Messages
356 (0.06/day)
Location
USA
System Name Sonido
Processor E6600 @ 3.20 GHz (1600 FSB)
Motherboard abit IX38 QuadGT
Cooling Tt SpinQ (load @ 29c)
Memory TopRam SpeedRAM A.K.A "El Cheapo" @ 800 MHz
Video Card(s) Diamond HD 4870 (@ Stock)
Storage Primary: 500 GB WD
Display(s) 32" Samsung 1080p HDTV
Case Antec Twelve hundred (Modded Tri-cool fans)
Audio Device(s) On-board HD Audio
Power Supply 700W Rocketfish
Software Vista\7\Linux\Hackintosh
Wow, thats sh*t lol. Why did I spend money on this dual band router then :p.

I guess it's good to have for the future. Just set up your N network on that band. It's backwards compatible with G.
 
Joined
Mar 19, 2009
Messages
2,481 (0.45/day)
System Name Always changing
Processor Always changing
Motherboard Always changing
Cooling Always changing
Memory Always changing
Video Card(s) Always changing
Storage Always changing
Display(s) Always changing
Case Always changing
Audio Device(s) Always changing
Power Supply Always changing
Mouse Always changing
Keyboard Always changing
I guess it's good to have for the future. Just set up your N network on that band. It's backwards compatible with G.

+1 on that. Good luck Pinchy :toast:
 
Joined
Apr 21, 2008
Messages
5,250 (0.90/day)
Location
IRAQ-Baghdad
System Name MASTER
Processor Core i7 3930k run at 4.4ghz
Motherboard Asus Rampage IV extreme
Cooling Corsair H100i
Memory 4x4G kingston hyperx beast 2400mhz
Video Card(s) 2X EVGA GTX680
Storage 2X Crusial M4 256g raid0, 1TbWD g, 2x500 WD B
Display(s) Samsung 27' 1080P LED 3D monitior 2ms
Case CoolerMaster Chosmos II
Audio Device(s) Creative sound blaster X-FI Titanum champion,Creative speakers 7.1 T7900
Power Supply Corsair 1200i, Logitch G500 Mouse, headset Corsair vengeance 1500
Software Win7 64bit Ultimate
Benchmark Scores 3d mark 2011: testing
different frequency can't work , with 5Ghz there is range between 5.2 to 5.8 for connect the 2.4 can't connect with it
 

Sonido

New Member
Joined
Aug 25, 2008
Messages
356 (0.06/day)
Location
USA
System Name Sonido
Processor E6600 @ 3.20 GHz (1600 FSB)
Motherboard abit IX38 QuadGT
Cooling Tt SpinQ (load @ 29c)
Memory TopRam SpeedRAM A.K.A "El Cheapo" @ 800 MHz
Video Card(s) Diamond HD 4870 (@ Stock)
Storage Primary: 500 GB WD
Display(s) 32" Samsung 1080p HDTV
Case Antec Twelve hundred (Modded Tri-cool fans)
Audio Device(s) On-board HD Audio
Power Supply 700W Rocketfish
Software Vista\7\Linux\Hackintosh
different frequency can't work , with 5Ghz there is range between 5.2 to 5.8 for connect the 2.4 can't connect with it

Huh? Yes it can. N works on both freq'.
 
Joined
Apr 21, 2008
Messages
5,250 (0.90/day)
Location
IRAQ-Baghdad
System Name MASTER
Processor Core i7 3930k run at 4.4ghz
Motherboard Asus Rampage IV extreme
Cooling Corsair H100i
Memory 4x4G kingston hyperx beast 2400mhz
Video Card(s) 2X EVGA GTX680
Storage 2X Crusial M4 256g raid0, 1TbWD g, 2x500 WD B
Display(s) Samsung 27' 1080P LED 3D monitior 2ms
Case CoolerMaster Chosmos II
Audio Device(s) Creative sound blaster X-FI Titanum champion,Creative speakers 7.1 T7900
Power Supply Corsair 1200i, Logitch G500 Mouse, headset Corsair vengeance 1500
Software Win7 64bit Ultimate
Benchmark Scores 3d mark 2011: testing
Huh? Yes it can. N works on both freq'.

wireless :confused: , im try it before can't even see the the device in my search list with different freq' .
 

Sonido

New Member
Joined
Aug 25, 2008
Messages
356 (0.06/day)
Location
USA
System Name Sonido
Processor E6600 @ 3.20 GHz (1600 FSB)
Motherboard abit IX38 QuadGT
Cooling Tt SpinQ (load @ 29c)
Memory TopRam SpeedRAM A.K.A "El Cheapo" @ 800 MHz
Video Card(s) Diamond HD 4870 (@ Stock)
Storage Primary: 500 GB WD
Display(s) 32" Samsung 1080p HDTV
Case Antec Twelve hundred (Modded Tri-cool fans)
Audio Device(s) On-board HD Audio
Power Supply 700W Rocketfish
Software Vista\7\Linux\Hackintosh
wireless :confused: , im try it before can't even see the the device in my search list with different freq' .

Both the card and the router have to support that freq', but N is able to operate at both 2.4 and 5 GHz.
 
Joined
Apr 21, 2008
Messages
5,250 (0.90/day)
Location
IRAQ-Baghdad
System Name MASTER
Processor Core i7 3930k run at 4.4ghz
Motherboard Asus Rampage IV extreme
Cooling Corsair H100i
Memory 4x4G kingston hyperx beast 2400mhz
Video Card(s) 2X EVGA GTX680
Storage 2X Crusial M4 256g raid0, 1TbWD g, 2x500 WD B
Display(s) Samsung 27' 1080P LED 3D monitior 2ms
Case CoolerMaster Chosmos II
Audio Device(s) Creative sound blaster X-FI Titanum champion,Creative speakers 7.1 T7900
Power Supply Corsair 1200i, Logitch G500 Mouse, headset Corsair vengeance 1500
Software Win7 64bit Ultimate
Benchmark Scores 3d mark 2011: testing
Both the card and the router have to support that freq', but N is able to operate at both 2.4 and 5 GHz.

now that's different than main , i was try connect two device with static freq' , nano station 5 with antena 2.4 , you know there is some old devices can't change freq' .
 

Sonido

New Member
Joined
Aug 25, 2008
Messages
356 (0.06/day)
Location
USA
System Name Sonido
Processor E6600 @ 3.20 GHz (1600 FSB)
Motherboard abit IX38 QuadGT
Cooling Tt SpinQ (load @ 29c)
Memory TopRam SpeedRAM A.K.A "El Cheapo" @ 800 MHz
Video Card(s) Diamond HD 4870 (@ Stock)
Storage Primary: 500 GB WD
Display(s) 32" Samsung 1080p HDTV
Case Antec Twelve hundred (Modded Tri-cool fans)
Audio Device(s) On-board HD Audio
Power Supply 700W Rocketfish
Software Vista\7\Linux\Hackintosh
now that's different than main , i was try connect two device with static freq' , nano station 5 with antena 2.4 , you know there is some old devices can't change freq' .

I see where the confusion lies. I meant set the router to a 2.4 GHz band for N. Since his card is unable to go to the 5 GHz range, I suggested that.
 
Joined
Apr 21, 2008
Messages
5,250 (0.90/day)
Location
IRAQ-Baghdad
System Name MASTER
Processor Core i7 3930k run at 4.4ghz
Motherboard Asus Rampage IV extreme
Cooling Corsair H100i
Memory 4x4G kingston hyperx beast 2400mhz
Video Card(s) 2X EVGA GTX680
Storage 2X Crusial M4 256g raid0, 1TbWD g, 2x500 WD B
Display(s) Samsung 27' 1080P LED 3D monitior 2ms
Case CoolerMaster Chosmos II
Audio Device(s) Creative sound blaster X-FI Titanum champion,Creative speakers 7.1 T7900
Power Supply Corsair 1200i, Logitch G500 Mouse, headset Corsair vengeance 1500
Software Win7 64bit Ultimate
Benchmark Scores 3d mark 2011: testing
I see where the confusion lies. I meant set the router to a 2.4 GHz band for N. Since his card is unable to go to the 5 GHz range, I suggested that.

it is ok , we are share info here so it is ok let we help the guy
 
Top