LifeFlayer
New Member
- Joined
- Jul 21, 2009
- Messages
- 13 (0.00/day)
System Name | Aluminus |
---|---|
Processor | Q6600 @ 2.4ghz, 1.15v |
Motherboard | Gigabyte 965p ds3 rev3.3 |
Cooling | Coolermaster Geminii |
Memory | Patriot PC6400 2x2GB 5-5-5-12 |
Video Card(s) | Powercolor HD4850 512MB |
Storage | WD Caviar Black 1TB, 2x Caviar Blue 320gb |
Display(s) | Dell 2405fpw |
Case | Ultra Aluminus |
Audio Device(s) | Zero DAC |
Power Supply | OCZ 700w modxstream |
Hey guys. I currently have my q6600 b3 clocked at 3.0ghz @ 1.35v in bios. When I run p95 with small FFT, the 3rd core would fail after around 15 minutes or so. However, when I run LinX 32bit, it can run for over 20 cycles and still produce no errors. I am wondering if I set up something wrong in LinX as I just used the default settings with Memory to use set to All. The temperature with Linpack is around 1-2c higher than p95's. My system also feels a lot more unresponsive when LinX is running compared to p95. This is normal? Should I even bother with making sure my system is stable under p95 if Linpack is perfectly fine.