- Joined
- Dec 6, 2005
- Messages
- 10,881 (1.62/day)
- Location
- Manchester, NH
| System Name | Senile |
|---|---|
| Processor | I7-4790K@4.8 GHz 24/7 |
| Motherboard | MSI Z97-G45 Gaming |
| Cooling | Be Quiet Pure Rock Air |
| Memory | 16GB 4x4 G.Skill CAS9 2133 Sniper |
| Video Card(s) | GIGABYTE Vega 64 |
| Storage | Samsung EVO 500GB / 8 Different WDs / QNAP TS-253 8GB NAS with 2x10Tb WD Blue |
| Display(s) | 34" LG 34CB88-P 21:9 Curved UltraWide QHD (3440*1440) *FREE_SYNC* |
| Case | Rosewill |
| Audio Device(s) | Onboard + HD HDMI |
| Power Supply | Corsair HX750 |
| Mouse | Logitech G5 |
| Keyboard | Corsair Strafe RGB & G610 Orion Red |
| Software | Win 10 |
This is on an ASUS Maximus Extreme X38 w/ an E8600.
I can't seem to break the Prime95 (two workers) long term torture over 4.4 Ghz, I'm at 1.296v according to CPUz. Windows itself is stable at 4.6 Ghz at that voltage. Temps at 66c max (load), 44c idle. OCZ Vendetta DHP cooler.
Would raising the CPU PLL voltage help? What should I set it to?
I get almost identical results using 10x, 9.5x, 9.0x & 8.5x multipliers. The board seems to have a 530 or so FSB cap. So far, I haven't messed with the NB voltage.
I can't seem to break the Prime95 (two workers) long term torture over 4.4 Ghz, I'm at 1.296v according to CPUz. Windows itself is stable at 4.6 Ghz at that voltage. Temps at 66c max (load), 44c idle. OCZ Vendetta DHP cooler.
Would raising the CPU PLL voltage help? What should I set it to?
I get almost identical results using 10x, 9.5x, 9.0x & 8.5x multipliers. The board seems to have a 530 or so FSB cap. So far, I haven't messed with the NB voltage.
