- Joined
- Nov 28, 2009
- Messages
- 62 (0.01/day)
- Location
- Ontario, Canada
Processor | INTEL 12th Gen CORE i9 12900K |
---|---|
Motherboard | ASUS ROG STRIX Z690-A GAMING WIFI D4 |
Cooling | CORSAIR iCUE H150i CAPELLIX WHITE 360mm Radiator, Liquid CPU Cooler |
Memory | Corsair Vengeance RGB PRO 32 GB (4x8) DDR4 DRAM3200MHz , WHITE |
Video Card(s) | ASUS ROG StrixGeforce RTX 3080 V2 White OC Edition 10 GB GDDR6X LHR |
Storage | 1 TB Corsair mp 600 core , 2 Samsung 850 EVO-Series 500GB 2.5" SSD |
Display(s) | Acer XB270HU bpz 27" G-Sync 144Mz IPS (2560x1440) Gaming Monitor |
Case | Corsair 4000 AIRFLOW Tempered Glass Mid Tower ATX Case, White |
Power Supply | Evga 750W 80+ Gold Certified Fully-Modular ATX (Added Cablemod custom white cable kit) |
Mouse | Logitech G502 Proteus Spectrum Gaming Mouse |
Keyboard | Corsair K70 RGB Mechanical Gaming Keyboard (Red Keys) |
Software | Win 11 Home 64-bit |
http://fohttp://forums.techpowerup....ent.php?attachmentid=31079&stc=1&d=1259712265
This was done with case on side; case panel off. Room temp near case 25C. Case temp inside case(still air) 26C. Holding probe just above CPU plate cover 32C.Touching top of heatsink base 32C. I am setting Core voltage to 1.13125V to get close to 1.10V in CPU-Z, because of VDroop. See attachments one and two
I also set Core voltage to 10.0V and allowed Vdroop, to see if it makes a different. See attachment three.
This unit I am using was just calibrated 2 months ago, so the temp readings should be OK.
On both voltage settings, all senors are moving. when the load % settles down(after opening RealTemp). Guessing, I would say the core1 set at 103 TJMax might not change as frequently as the rest.
This was done with case on side; case panel off. Room temp near case 25C. Case temp inside case(still air) 26C. Holding probe just above CPU plate cover 32C.Touching top of heatsink base 32C. I am setting Core voltage to 1.13125V to get close to 1.10V in CPU-Z, because of VDroop. See attachments one and two
I also set Core voltage to 10.0V and allowed Vdroop, to see if it makes a different. See attachment three.
This unit I am using was just calibrated 2 months ago, so the temp readings should be OK.
On both voltage settings, all senors are moving. when the load % settles down(after opening RealTemp). Guessing, I would say the core1 set at 103 TJMax might not change as frequently as the rest.
Attachments
Last edited: