Your PC ATM

[MT Alex]

Yah, it's a 23 cm, I'm glad you guys think its a good idea, I was wondering if it would keep up with the 120's. I'm putting them all on a controller, so I hope so. My first loop, I'm all affluter.

 

[Chicken Patty]

Yah, it's a 23 cm, I'm glad you guys think its a good idea, I was wondering if it would keep up with the 120's. I'm putting them all on a controller, so I hope so. My first loop, I'm all affluter.

I'm just wondering how much it'll help, should be cool to try it with and without. Not sure if you are able to do that though.

 

[MoonPig]

For all those wondering, im using this case until i finish my desk (which will be awhile as my ideas are proving hard to create...)

Just done this cut:

Just needs abit of trimming and sanding. Then it's either mesh or plastic

 

[Binge]

Hey I can see your PC components, they all nekkid and stuff. That's like cutting away the chest of some stacked mistress. I thank you MP.

 

[Chicken Patty]

For all those wondering, im using this case until i finish my desk (which will be awhile as my ideas are proving hard to create...)

Just done this cut:

http://img.techpowerup.org/100122/100_1588.jpg

Just needs abit of trimming and sanding. Then it's either mesh or plastic

that cut looks good, just a matter of putting the final touches to it.

 

[MoonPig]

Yea, but my arm is killing me... so, i'll do it tomorrow... im lazy like that.

Thanks fellas

 

[Chicken Patty]

Yea, but my arm is killing me... so, i'll do it tomorrow... im lazy like that.

Thanks fellas

That's cool, TPU is not in a hurry.

 

[Thrackan]

That's cool, TPU is not in a hurry.

Yes I am

 

[pantherx12]

For all those wondering, im using this case until i finish my desk (which will be awhile as my ideas are proving hard to create...)

Just done this cut:

http://img.techpowerup.org/100122/100_1588.jpg

Just needs abit of trimming and sanding. Then it's either mesh or plastic

That's a real nice cut MP!

Once its tidy it will look like it was supposed to be there all along

What you use Dremel like device ?

 

[MoonPig]

Same method for all 'important' cuts:

1) Draw the cut
2) Go round with a scratch knife (makes a tiny groove)
3) Go round with a dremel (make a bigger groove)
4) Cut 2cm from edge with tinsnips
5) Cut on the edge with tipsnips - where iam now
6) Sand and file till smooth
7) Spray and use

Easy

 

[Thrackan]

Same method for all 'important' cuts:

1) Draw the cut
2) Go round with a scratch knife (makes a tiny groove)
3) Go round with a dremel (make a bigger groove)
4) Cut 2cm from edge with tinsnips
5) Cut on the edge with tipsnips - where iam now
6) Sand and file till smooth
7) Spray and use

Easy

Tin snips, you listened to MkMods!

 

[Chicken Patty]

I want to get tin snips soon. I have a cheap case at home to practice on.

 

[musek]

OK, I think that my case switch is over now. Due to vibrations of my CM690 and a '$35 freaken bargain' (thx pantherx12 ) I've got on Gigabyte Aurora 3D the decision was simple.

Some basic photos for now (I have some shiat light right now). More photos of the insides are coming tomorrow I hope.

And - in the end, there will be cake.

So let's start with the brushed alluminium front with a slight view on the side window:

And these are some insides I've managed to get a decent photo of:

I had to remove the hdd cage because HD5870 wouldn't fit in. Drives are installed in top 5.25" bays.
Yup, my fans are running that fast lol


Oh noes, I almost forgot about the cake!!

As a GLaDOS fan I can sing now:
"This was a triumph.
I'm making a note here: HUGE SUCCESS.
It's hard to overstate my satisfaction."

 

[pabloc74]

That's what I was thinking At least another fan to complete the trio. Wonder why only two fans?

because in the stacker i used 2, and to puerchase 1 more i need to bui it on newegg, and no one wants to ask 1 only cooler fron USA to Argentina, when 1 friend ask another things i wanna buy it

http://img32.imageshack.us/img32/403/img0697g.jpg

Nevermind that red SATA cable, one of the SATA cables Corsair provided is dead and did a quick fix.

nice!

 

[PP Mguire]

OK, I think that my case switch is over now. Due to vibrations of my CM690 and a '$35 freaken bargain' (thx pantherx12 ) I've got on Gigabyte Aurora 3D the decision was simple.

Some basic photos for now (I have some shiat light right now). More photos of the insides are coming tomorrow I hope.

And - in the end, there will be cake.

So let's start with the brushed alluminium front with a slight view on the side window:
http://img.techpowerup.org/100122/DSC06580388.jpg
http://img.techpowerup.org/100122/DSC06585083.jpg


And these are some insides I've managed to get a decent photo of:
http://img.techpowerup.org/100122/DSC06591987.jpg

I had to remove the hdd cage because HD5870 wouldn't fit in. Drives are installed in top 5.25" bays.
Yup, my fans are running that fast lol


Oh noes, I almost forgot about the cake!!
http://img.techpowerup.org/100122/DSC06596.jpg

As a GLaDOS fan I can sing now:
"This was a triumph.
I'm making a note here: HUGE SUCCESS.
It's hard to overstate my satisfaction."

Im diggin the purple fans

 

[erocker]

I like the cake!

 

[(FIH) The Don]

OK, I think that my case switch is over now. Due to vibrations of my CM690 and a '$35 freaken bargain' (thx pantherx12 ) I've got on Gigabyte Aurora 3D the decision was simple.

Some basic photos for now (I have some shiat light right now). More photos of the insides are coming tomorrow I hope.

And - in the end, there will be cake.

So let's start with the brushed alluminium front with a slight view on the side window:
http://img.techpowerup.org/100122/DSC06580388.jpg
http://img.techpowerup.org/100122/DSC06585083.jpg


And these are some insides I've managed to get a decent photo of:
http://img.techpowerup.org/100122/DSC06591987.jpg

I had to remove the hdd cage because HD5870 wouldn't fit in. Drives are installed in top 5.25" bays.
Yup, my fans are running that fast lol


Oh noes, I almost forgot about the cake!!
http://img.techpowerup.org/100122/DSC06596.jpg

As a GLaDOS fan I can sing now:
"This was a triumph.
I'm making a note here: HUGE SUCCESS.
It's hard to overstate my satisfaction."

nice rig man! everything looks very nice i think

cant wait for my CM690 II advanced to arrive

 

[brandonwh64]

Well got the rampage II gene today and i must say its a beauty! Its really small! i was impress on what it looked like in my case. i have encoundered some problems tho. My dual 120 rad will not fit inside of the case and my single 120 will fit on the back but you cannot take the side panel off (side of the rad blocks it) SO im going to have to mount my dual 120 RAD on the outside of the case and try to custom mount the the single rad but other than that, the motherboard looks and fits great inside my NZXT M59

 

[musek]

Im diggin the purple fans

Noiseblocker XL1 Rev.3 - really good fans at very reasonable price! I bought three of them for the CM690 and now they're in the Aurora.

I like the cake!

It was delicious. But it's gone

nice rig man! everything looks very nice i think

cant wait for my CM690 II advanced to arrive

Thanks mate. CM690 II is near perfect IMO. Good luck and I hope we'll see some photos.

 

[(FIH) The Don]

ill be spamming this thread with pics of it ok maybe just a couple

 

[SK-1]

OK, I think that my case switch is over now. Due to vibrations of my CM690 and a '$35 freaken bargain' (thx pantherx12 ) I've got on Gigabyte Aurora 3D the decision was simple.

Sleek looking case. I like the fact the front door opens the RIGHT way.

 

[musek]

ill be spamming this thread with pics of it ok maybe just a couple

You better be.

Sleek looking case. I like the fact the front door opens the RIGHT way.

Thanks mate. Yup, front door opens just right for me. The ability to switch them would be good though.

 

[(FIH) The Don]

Will do i might put a window in it with some cathodes and nice fans, but not too much,

 

[musek]

I'm thinking about a cathode to light up the window... Hmmmmmmm... I have three blue LED fans from Gigabyte but don't have the place to put them (5.25" bays are filled with optical and HDDs).
We'll see.

 

[Chicken Patty]

because in the stacker i used 2, and to puerchase 1 more i need to bui it on newegg, and no one wants to ask 1 only cooler fron USA to Argentina, when 1 friend ask another things i wanna buy it



nice!

Oh ok, I didn't realize you were in Argentina. I've only met about two or three members on here that are from South America. You, a Brazilian and one from Uruguay maybe? Not sure.