DTV DRAGON
New Member
- Joined
- Jun 3, 2008
- Messages
- 877 (0.15/day)
- Location
- canada
System Name | family system |
---|---|
Processor | intel quad core Q9650 o/c'ed to 4.1 |
Motherboard | gigabyte EP45T-USB3P ( new board) |
Cooling | custom cpu and gpu cooling |
Memory | 8 gig G.Skills RipJaws @ 7,8,7,24,@1440mhz |
Video Card(s) | HD5870 SAPPHIRE 1018@1310at1.29v on water |
Storage | 750 gig sata 7500rpm X2 seagate barracuda |
Display(s) | acer 22.5 lcd |
Case | Antec 600 |
Audio Device(s) | 7.1 internal, soon to be auzentech x-fi forte |
Power Supply | thermaltake 850 watt modular (new version, single rail) |
Software | Windows 7, 64 ult. |
Benchmark Scores | vantage E47428 3DMARK06 23290 needs updateing |
have a question here about loadline calibration... in my bios I see it is set to disabled by default, from looking at most everyone elses whom overclock as well have it set to enabled, ,in my manual it says to enabble it adjusts the vdroop,keeping the cpu voltage more constantunder light and heavy loads, Now seeing that i have mine o/ced to 3.87 should i enable it as well? actually here is a template of my bios, can you o/c gurus please have a look to see if there is anything i might want to change,
******Motherboard Intelligent Tweaker (M.I.T.)******
Robust Graphics Booster.........................[ AUTO ]
CPU Clock Ratio.................................[ 9 ]
Fine CPU Clock Ratio............................[ + 0.0 ]
CPU Frequency 4.5GHz............................[ 430x9] 3.87
******Clock Chip Control******
CPU Host Clock Control..........................[ Enabled ]
CPU Host Frequency (Mhz)........................[ 430]
PCI Express Frequency (Mhz).....................[ 100 ]
C.I.A 2.........................................[ Disabled ]
******Advanced Clock Control******
CPU Clock Drive.................................[ 800mv ]
PCI Express Clock Drive.........................[8 00mv ]
CPU Clock Skew..................................[ 0ps ]
MCH Clock Skew..................................[ 0ps ]
******DRAM Performance Control******
Performance Enhance.............................[ STANDARD ]
(G) MCH Frequency Latch.........................[ 333]
System Memory Multipler.........................[ 240B ]
Memory Frequency 1333...........................[ 1032 ]
DRAM Timing Selectable..........................[ AUTO ]
CAS Latency Time................................[ 9]
tRCD............................................[ 9]
tRP.............................................[ 9]
tRAS............................................[ 24]
******Advanced Timing Control******
tRRD[4].........................................[ 4]
tWTR[4].........................................[ 5]
tWR[13].........................................[ 10 ]
tRFC[68] .......................................[ 74 ]
tRTP[4].........................................[ Auto ]
Command Rate (cmd)[0]...........................[ Auto ]
******Channel A Timing Settings******
Static tRead Value [ 11 ] ................[ 11 ]
tRD Phase0 Adjustment [ 0 ] ................[ Auto ]
tRD Phase1 Adjustment [ 0 ] ................[ Auto ]
tRD Phase2 Adjustment [ 0 ] ................[ Auto ]
tRD Phase3 Adjustment [ 0 ] ................[ Auto ]
tRD 2rd (Differnt Rank) [ 8 ] ................[ Auto ]
tWR 2wr (Differnt Rank) [ 8 ] ................[ Auto ]
tWR 2rd (Differnt Rank) [ 7 ] ................[ Auto ]
tRD 2wr (Same/Difft Rank) [ 9 ] ................[ Auto
Dimm 1 Clock Skew Control.......................[ Auto ]
Dimm 2 Clock Skew Control.......................[ Auto ]
DDR Write Training..............................[ Auto ]
******Channel A Driving Settings******
Drive Strength Profile..........................[ Auto ]
Data Driving Pull Up Level......................[ Auto ]
cmd Driving Pull Up Level.......................[ Auto ]
ctrl Driving Pull Up Level......................[ Auto ]
clk Driving Pull Up Level.......................[ Auto ]
Data Driving Pull Down Level....................[ Auto ]
cmd Driving Pull Down Level.....................[ Auto ]
ctrl Driving Pull Down Level....................[ Auto ]
clk Driving Pull Down Level.....................[ Auto ]
******Channel B Timing Settings******
Static tRead Value [ 11] ................[ 11 ]
tRD Phase0 Adjustment [ 0 ] ................[ Auto ]
tRD Phase1 Adjustment [ 0 ] ................[ Auto ]
tRD Phase2 Adjustment [ 0 ] ................[ Auto ]
tRD Phase3 Adjustment [ 0 ] ................[ Auto ]
tRD 2rd (Differnt Rank) [ 8 ] ................[ Auto ]
tWR 2wr (Differnt Rank) [ 8 ] ................[ Auto ]
tWR 2rd (Differnt Rank) [ 7 ] ................[ Auto ]
tRD 2wr (Same/Difft Rank) [ 9 ] ................[ Auto ]
Dimm 1 Clock Skew Control.......................[ Auto ]
Dimm 2 Clock Skew Control.......................[ Auto ]
DDR Write Training..............................[ Auto ]
******Channel B Driving Settings******
Drive Strength Profile..........................[ Auto ]
Data Driving Pull Up Level......................[ Auto ]
cmd Driving Pull Up Level.......................[ Auto ]
ctrl Driving Pull Up Level......................[ Auto ]
clk Driving Pull Up Level.......................[ Auto ]
Data Driving Pull Down Level....................[ Auto ]
cmd Driving Pull Down Level.....................[ Auto ]
ctrl Driving Pull Down Level....................[ Auto ]
clk Driving Pull Down Level.....................[ Auto ]
******Motherboard Voltage Control******
Load-Line Calibration...........................[ DISABLED ]
CPU Vcore [ 1.25 ]...................[ 1.2875]
CPU Termination [ 1.20 ]...................[ AUTO ]
CPU PLL [ 1.55]...................[ AUTO]
CPU Reference [ 0.805]...................[ AUTO]
MCH Core [ 1.100 ]...................[ 1.26 ]
MCH Reference [ 0.760 ]...................[ AUTO ]
MCH/DRAM Refernce [ 0.900 ]...................[ Auto ]
ICH I/O [ 1.500 ]...................[ AUTO ]
ICH Core [ 1.100 ]...................[ AUTO]
DRAM Voltage [ 1.5]...................[ 1.64]
DRAM Termination [ 0.900 ]...................[AUTO]
Channel A Ref [ 0.900 ]...................[ DONT HAVE ]
Channel B Ref [ 0.900 ]...................[ DONT HAVE ]
******Advanced BIOS Features******
Limit CPUID Max to 3............................[ Disabled ]
No-Execute memory Protect.......................[ Disabled ]
CPU Enhance Halt (CIE)..........................[ Disabled ]
C2/C2E State Support............................[ Disabled ]
C4/C4E State Support............................[ Disabled ]
CPU Thermal Monitor.............................[ Disabled ]
CPU EIST Function...............................[ Disabled ]
Virtualization Technology.......................[ Disabled ]__________________
******Motherboard Intelligent Tweaker (M.I.T.)******
Robust Graphics Booster.........................[ AUTO ]
CPU Clock Ratio.................................[ 9 ]
Fine CPU Clock Ratio............................[ + 0.0 ]
CPU Frequency 4.5GHz............................[ 430x9] 3.87
******Clock Chip Control******
CPU Host Clock Control..........................[ Enabled ]
CPU Host Frequency (Mhz)........................[ 430]
PCI Express Frequency (Mhz).....................[ 100 ]
C.I.A 2.........................................[ Disabled ]
******Advanced Clock Control******
CPU Clock Drive.................................[ 800mv ]
PCI Express Clock Drive.........................[8 00mv ]
CPU Clock Skew..................................[ 0ps ]
MCH Clock Skew..................................[ 0ps ]
******DRAM Performance Control******
Performance Enhance.............................[ STANDARD ]
(G) MCH Frequency Latch.........................[ 333]
System Memory Multipler.........................[ 240B ]
Memory Frequency 1333...........................[ 1032 ]
DRAM Timing Selectable..........................[ AUTO ]
CAS Latency Time................................[ 9]
tRCD............................................[ 9]
tRP.............................................[ 9]
tRAS............................................[ 24]
******Advanced Timing Control******
tRRD[4].........................................[ 4]
tWTR[4].........................................[ 5]
tWR[13].........................................[ 10 ]
tRFC[68] .......................................[ 74 ]
tRTP[4].........................................[ Auto ]
Command Rate (cmd)[0]...........................[ Auto ]
******Channel A Timing Settings******
Static tRead Value [ 11 ] ................[ 11 ]
tRD Phase0 Adjustment [ 0 ] ................[ Auto ]
tRD Phase1 Adjustment [ 0 ] ................[ Auto ]
tRD Phase2 Adjustment [ 0 ] ................[ Auto ]
tRD Phase3 Adjustment [ 0 ] ................[ Auto ]
tRD 2rd (Differnt Rank) [ 8 ] ................[ Auto ]
tWR 2wr (Differnt Rank) [ 8 ] ................[ Auto ]
tWR 2rd (Differnt Rank) [ 7 ] ................[ Auto ]
tRD 2wr (Same/Difft Rank) [ 9 ] ................[ Auto
Dimm 1 Clock Skew Control.......................[ Auto ]
Dimm 2 Clock Skew Control.......................[ Auto ]
DDR Write Training..............................[ Auto ]
******Channel A Driving Settings******
Drive Strength Profile..........................[ Auto ]
Data Driving Pull Up Level......................[ Auto ]
cmd Driving Pull Up Level.......................[ Auto ]
ctrl Driving Pull Up Level......................[ Auto ]
clk Driving Pull Up Level.......................[ Auto ]
Data Driving Pull Down Level....................[ Auto ]
cmd Driving Pull Down Level.....................[ Auto ]
ctrl Driving Pull Down Level....................[ Auto ]
clk Driving Pull Down Level.....................[ Auto ]
******Channel B Timing Settings******
Static tRead Value [ 11] ................[ 11 ]
tRD Phase0 Adjustment [ 0 ] ................[ Auto ]
tRD Phase1 Adjustment [ 0 ] ................[ Auto ]
tRD Phase2 Adjustment [ 0 ] ................[ Auto ]
tRD Phase3 Adjustment [ 0 ] ................[ Auto ]
tRD 2rd (Differnt Rank) [ 8 ] ................[ Auto ]
tWR 2wr (Differnt Rank) [ 8 ] ................[ Auto ]
tWR 2rd (Differnt Rank) [ 7 ] ................[ Auto ]
tRD 2wr (Same/Difft Rank) [ 9 ] ................[ Auto ]
Dimm 1 Clock Skew Control.......................[ Auto ]
Dimm 2 Clock Skew Control.......................[ Auto ]
DDR Write Training..............................[ Auto ]
******Channel B Driving Settings******
Drive Strength Profile..........................[ Auto ]
Data Driving Pull Up Level......................[ Auto ]
cmd Driving Pull Up Level.......................[ Auto ]
ctrl Driving Pull Up Level......................[ Auto ]
clk Driving Pull Up Level.......................[ Auto ]
Data Driving Pull Down Level....................[ Auto ]
cmd Driving Pull Down Level.....................[ Auto ]
ctrl Driving Pull Down Level....................[ Auto ]
clk Driving Pull Down Level.....................[ Auto ]
******Motherboard Voltage Control******
Load-Line Calibration...........................[ DISABLED ]
CPU Vcore [ 1.25 ]...................[ 1.2875]
CPU Termination [ 1.20 ]...................[ AUTO ]
CPU PLL [ 1.55]...................[ AUTO]
CPU Reference [ 0.805]...................[ AUTO]
MCH Core [ 1.100 ]...................[ 1.26 ]
MCH Reference [ 0.760 ]...................[ AUTO ]
MCH/DRAM Refernce [ 0.900 ]...................[ Auto ]
ICH I/O [ 1.500 ]...................[ AUTO ]
ICH Core [ 1.100 ]...................[ AUTO]
DRAM Voltage [ 1.5]...................[ 1.64]
DRAM Termination [ 0.900 ]...................[AUTO]
Channel A Ref [ 0.900 ]...................[ DONT HAVE ]
Channel B Ref [ 0.900 ]...................[ DONT HAVE ]
******Advanced BIOS Features******
Limit CPUID Max to 3............................[ Disabled ]
No-Execute memory Protect.......................[ Disabled ]
CPU Enhance Halt (CIE)..........................[ Disabled ]
C2/C2E State Support............................[ Disabled ]
C4/C4E State Support............................[ Disabled ]
CPU Thermal Monitor.............................[ Disabled ]
CPU EIST Function...............................[ Disabled ]
Virtualization Technology.......................[ Disabled ]__________________