Your PC ATM

[(FIH) The Don]

yep, the gigabyte ud7 board, its crazy with NF200 chip and what not

 

[dr emulator (madmax)]

behold franken pc

 

[Thrackan]

The first room that was "decorated" in my new house:

Still a goddamn mess, but hey, I can use my PC

 

[mlee49]

hey mlee, this is what replaced your purchase

http://img.techpowerup.org/100327/IMG_0327.jpg

Ah it's ok, no D14 though.

When is water coming?

 

[DOM]

will do shortly. I was just gaming on my rig so the GPU is going to be heating things up alittle so in like 10-15min i will run LinX.btw the GPU is on AIR but it still heats up the CPU somehow.

EDIT:here you go...I see the LLC makes my voltage higher
http://img.techpowerup.org/100326/temps.png

how cold was the room cuz your idle temps are low compared to wut im getting

will this is wut i got i guess my d0 is hotter or something going to try running the block backwards see if temps change

 

[p_o_s_pc]

It was 73f at the time of testing normal room temps for me range from 68f-80f depending greatly on how much I am on..

btw i think on of the sensors are whacked because the room would have to be 68f to be 20c unless the temp on the floor was 5f lower... That could be possible

 

[sneekypeet]

Ah it's ok, no D14 though.

When is water coming?

Nope it is no D14, its half the size and just edges it out with the stock fan.

Not too sure on the water front, looks like I need to invest in a new GPU for work

 

[Fitseries3]

 

[sneekypeet]

yup half that size...lol

Its a big monster isnt it fits?

EDIT: is that board 8 x 8 x 4 on the lanes?

 

[Fitseries3]

i love it....

4.7ghz on air with my x5677

thats a gb x58a-ud3r which i think runs 16x8x8

 

[SK-1]

Very nice Fits...

 

[brandonwh64]

WOW nice fits!!! when are you picking up your dual 1366 EVGA?

 

[red268]

My pc ATM.

Temporary setup so screw the cable management ha

http://img.photobucket.com/albums/v311/mopatop/DSCF1470.jpg
http://img.photobucket.com/albums/v311/mopatop/DSCF1468.jpg

Just did an i5 build in that case. Fantastic case for £25!!

 

[Solaris17]

bad heatsink fans too... good casefans, but put anything in front of them and it turns in a handful of fail.

??? wtf? maybe an lol? how would they perform any diffirent than any other fan with something infront of it? cooling? how is it any worse than another fan with its CFM? CFM is CFM and if their in the same legue they perform similar...thats why they call CFM a Standard unit of measurement.

avatar related

 

[pantherx12]

Just did an i5 build in that case. Fantastic case for £25!!

Outstanding really! bit cramped in some ways but hey, £25 quid, I've had £90 cases that are worse

Won't be using it long though, just whilst I paint/mod my Kandalf : ]

 

[phanbuey]

??? wtf? maybe an lol? how would they perform any diffirent than any other fan with something infront of it? cooling? how is it any worse than another fan with its CFM? CFM is CFM and if their in the same legue they perform similar...thats why they call CFM a Standard unit of measurement.

avatar related

LOL... wow didn't expect that from you, but let the lesson begin:

static pressure.

some fans blow less CFM but have a higher static pressure...

In this case its blade design and fan thickness that affects static pressure. A 50 CFM 25mm fan will get killed by a 50 CFM 38mm fan if you put it on a heatsink, because the 38MM is less susceptible to the backfeed and the restriction of the cooler, and actually blows MORE air THROUGH the heatsink.

This same concept applies to fan design and blade orientation/spacing of fans using the same thickness.

so:
Noctua NF-P12

and
Noctua NF-S12

The top has more pressure, and is better on heatsinks even at lower RPM, even noctua will tell you this:

http://noctua.at/main.php?show=nf_s12_p12_comparison&lng=en

Same with water pumps, some pumps dont have the GPH of others, but have a higher head pressure due to to motor and impeller design.


here is some bathroom reading:

http://www.overclock3d.net/reviews/cases_cooling/noctua_nf-p12_static_pressure_performance/1

"The new Noctua NF-P12 now provides the static pressure needed for both heat exchanger and heat sink applications. All credit goes to Noctua for stepping up to the plate and making an even better product than the NF-S12's. Equally impressive is that you can now 'have your pie and eat it too' - cooling performance without the additional noise.

Subsequently, I have absolutely no hesitation in recommending the Noctua NF-P12 120mm cooling fans as a worthy addition to your cooling system."

so... this is why its always a good idea to know the tech specs of a product before relying on one Standard to measure performance. I know that you know better, or should know better, you wouldn't judge a PSU based on WATT rating alone.

 

[Fitseries3]

noctua NH-D14...



works guuuuuuuuurrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrreaaaat!

 

[phanbuey]

noctua NH-D14...



works guuuuuuuuurrrrrrrrrrrrrrrrrrrrrrrrrrrrrrrreaaaat!

http://img.techpowerup.org/100328/Capture016.jpg

damn ... do you live in a freezer? seriously. My WC couldn't do that... wtf.

 

[pantherx12]

To add to what Phanbuey said.

Static pressure is essentially power where as CFM is just speed.


For example guy x punches at 25mph

So does guy y

But guy y knows how to throw a punch so knocks you the hell out, where as guy x simply cuts your lip or what ever.



Good example in my head but does it make sense to others?

 

[phanbuey]

To add to what Phanbuey said.

Static pressure is essentially power where as CFM is just speed.


For example guy x punches at 25mph

So does guy y

But guy y knows how to throw a punch so knocks you the hell out, where as guy x simply cuts your lip or what ever.



Good example in my head but does it make sense to others?

Yeah totally, but just in case:

X is a 140 lb 8th grader.

and guy Y is Fedor Emilianenko.

 

[p_o_s_pc]

damn ... do you live in a freezer? seriously. My WC couldn't do that... wtf.

+1 to that my WC can't even do that

 

[Fitseries3]

its a $1660 32nm cpu. thats just how they clock.

room temp was 72f

 

[pantherx12]

By the way fit, think you've gone past the voltage safe zone if thats a 32nm cpu.


*edit*

I see you've confirmed it is above XD

 

[Fitseries3]

yup.. its ok.

 

[phanbuey]

damn... i gotta get me a 32nm.

5Ghz on a i5 quad 32nm would be perfect . Somehow I get the feeling that something like that won't be out for a while.