Ghetto Mods

OnBoard · Apr 1, 2010

Radical_Edward: you can use two of the slot covers with the fan. Have it like that on the sister Xigmatek Midgard case.

That way you'll block very little of the fan and it's more securely in place. Need a little angle to it and the holes don't match 100%, but it goes there

Radical_Edward · Apr 1, 2010

I'm going to be putting it lower down. also, I plan on installing a fan controller in the bottom slot.

mlee49 · Apr 2, 2010

Surfing on XS and found this:

That takes the cake

mstenholm · Apr 2, 2010

mlee49 said:
Surfing on XS and found this:

http://www.xtremesystems.org/forums/attachment.php?attachmentid=84849&stc=1&d=1220906124

That takes the cake

Clever one..wonder if he/she(?) used TIM at the screew heads

As long as it works AND you dont have to put your hand down there...

Velvet Wafer · Apr 2, 2010

mlee49 said:
Surfing on XS and found this:

http://www.xtremesystems.org/forums/attachment.php?attachmentid=84849&stc=1&d=1220906124

That takes the cake

redneck style! :laugh:

mlee49 · Apr 2, 2010

Yeah the screws are a nice touch, unless you actually touch them :laugh:

pantherx12 · Apr 2, 2010

Nice idea using screws to cool mosfets!

dr emulator (madmax) · Apr 2, 2010

an intel graphics card ey what will they think of next

did anyone notice the capacitor hanging off looks like it's been soldered sideways?

Thrackan · Apr 2, 2010

I've seen pennies before, liked them better than the screws tbh. But this is good too

pantherx12 · Apr 2, 2010

Thrackan said:
I've seen pennies before, liked them better than the screws tbh. But this is good too

Pennies are to big, you can cool small mosfets this way

For cheap XD

I'm going to try and find some copper screws :laugh:

will be so much cheaper the real heatsinks

Taz100420 · Apr 2, 2010

BazookaJoe said:
First of all, find one of these coming out of yer PSU, and cut it off.

The YELLOW line is 12v+ and either one of the BLACK lines are GND, and there's your power for the AMP (I am using CAR amp's)

http://img.techpowerup.org/100322/psupins1.jpg

Then, on this end of the PSU, connect the GREEN pin to one of the BLACK pins to make the PUS power up so you can run your amp - In the picture below I have used a paperclip.

http://img.techpowerup.org/100322/psupins2.jpg

You can also cut off all of those extra cables and connect a lamp switch to the green & black wires as an on/off switch, however I must warn that doing this WILL void any warranty on the device, and be downright dangerous.

If you are feeling even MORE dangerous, you can climb into the PSU and find one of the variable resistors / "pots" that regulates its output voltage and crank the 12V line up to about 13.8V for best results with your amp, but this is also quite dangerous , and is not necessary as 12V will power the amp almost perfectly. (NOT ALL PSU"S HAVE ONE OF THESE)

You really dont have to cut the molex end off. Just get an old fan and cut the female end and take out the red and one black wire and plug the connector into the PSU and bare the end wires and screw them into the amp. But dont forget, the amp has to turn on too. You have to get another strip of wire and jump it from the B+ on the amp to the remote. When ever you switch on on the PSU, the amp also turns on

EDIT: I also recommend that you take the pins out of the molex end you are making and put just a bit bigger gauge of wire in. Nothing real huge just a bit.

ehume · Apr 2, 2010

Radical_Edward said:
I plan on installing a fan controller in the bottom slot.

I've ditched all of mine. They make a good fan sound bad.

Radical_Edward · Apr 2, 2010

I'd figured I'd give one a shot. If I don't like It I can always get rid of it.

Velvet Wafer · Apr 2, 2010

ehume said:
I've ditched all of mine. They make a good fan sound bad.

Radical_Edward said:
I'd figured I'd give one a shot. If I don't like It I can always get rid of it.

if you get a high quality fan controller, that can handle stronger fans, everything will work like it should. just dont get a cheap one, these things tend to produce fan noise when you lower the speed too low... that already can be after 60% :laugh:

sunbeam and lamptron should make pretty good fan controllers, tho they are not cheap

Radical_Edward · Apr 3, 2010

Eh, I was looking at a Zalman one, but after some thought I realized the only reason I wanted one was because of my current CPU cooler. (Being replaced by a Zalman Next Friday hopefully.)

As I already planned on replacing the Rexus NMB fan, it being loud isn't an issue.

Speaking of the NMB fan, I took OnBoard's advice and mounted the fan using three screws. So I won't worry about it later.

ehume · Apr 3, 2010

Velvet Wafer said:
if you get a high quality fan controller, that can handle stronger fans, everything will work like it should. just dont get a cheap one, these things tend to produce fan noise when you lower the speed too low... that already can be after 60%

sunbeam and lamptron should make pretty good fan controllers, tho they are not cheap

Quality fan controllers =/= slot fan controllers.

Velvet Wafer · Apr 3, 2010

made a ghetto mod myself today!

i pimped this old 400w generic PSU with a second 2000rpm temp sensor controlled fan.. it had a slight grinding sound before, which currently isnt recognizable anymore

PSU has also improved regarding load-stability and output voltage, and its cool to the touch too! :rockout:

OnBoard · Apr 3, 2010

Radical_Edward said:
Speaking of the NMB fan, I took OnBoard's advice and mounted the fan using three screws. So I won't worry about it later.

http://i49.photobucket.com/albums/f282/Renagade_Recon/a6590363.jpg

http://i49.photobucket.com/albums/f282/Renagade_Recon/8e1491ef.jpg

You can use 4 if you use the other covers without the 3.5" place. That if you still have them around somewhere

But that's good too, not going out anywhere soon.

Radical_Edward · Apr 3, 2010

I have them. But I was going to wait to do such when the NMB's replacement fan gets here.

p_o_s_pc · Apr 9, 2010

had problems with a Linksys Wireless USB adapter so i took it apart and stuck some stables on the hottest parts and what do you know... It hasn't given me a problem since

Thrackan · Apr 9, 2010

Staples pwnage!

mlee49 · Apr 9, 2010

p_o_s_pc said:
had problems with a Linksys Wireless USB adapter so i took it apart and stuck some stables on the hottest parts and what do you know... It hasn't given me a problem since
http://img.techpowerup.org/100409/0408002304.jpg

That is so epic! Although why not add a 80mm fan?

[Ion] · Apr 9, 2010

That's awesome p_o_s!

d3fct · Apr 9, 2010

lol, linksys got pwned by staples...

DaveK · Apr 9, 2010

Oh man that intel cooler is awesome lol, wonder what temps he got

Processor	Core i5-750 @ 3.6GHz 1.136V 24/7
Motherboard	Gigabyte P55A-UD3, SATA 6Gbit/s & USB3.0 baby!
Cooling	Alpenföhn Brocken HeatpipeDirectTouch
Memory	Geil Ultra Series 4GB 2133MHz DDR3 @ 1440MHz 7-7-7-24
Video Card(s)	Gigabyte GTX 460 1GB OC (mostly stock speeds)
Storage	OS: Samsung F3 500GB Games: Samsung F1 640GB
Display(s)	new! Samsung P2350 23" FullHD 2ms / Mirai DTL-632E500 32" LCD
Case	new! Xigmatek Midgard/Utgard side window with red cathodes, 1x140mm & 3x120mm fans
Audio Device(s)	new! ASUS Xonar DG & JVC HA-RX700 headphones
Power Supply	Cougar CM 700W Modular
Software	Windows 7 Home Premium x64
Benchmark Scores	Logitech UltraX Premium & G5 laser v2 + Ulti-mat Breathe X2 for fragging

System Name	GLaDOS
Processor	AMD FX-9590 X8 4.7GHz
Motherboard	ASUS Sabertooth 990FX
Cooling	Corsair H80i v2
Memory	Corsair Vengeance 24GB (2x8GB, 2x4GB) DDR3 1600 MHz
Video Card(s)	ASUS ROG-STRIX-RX580-O8G-GAMINGOC
Storage	WD Blue 3D NAND 1TB Internal PC SSD
Display(s)	2 Acer S231HL 23" LED backlit LCD's on a Dual LCD stand
Case	Corsair iCUE 220T RGB Airflow
Audio Device(s)	Onboard - Corsair Void Pro Wireless
Power Supply	Corsair 850HXi 850W
Mouse	Corsair Sabre RGB
Keyboard	Corsair K70 LUX RGB
Software	Microsoft Windows 10 Pro 64 Bit

System Name	The Dove Box Rev 3.0
Processor	i7 8700k @ 4.7GHz
Motherboard	Asus Maximus X APEX
Cooling	Custom water loop
Memory	16GB 3600 MHz DDR4
Video Card(s)	2x MSI 780 Ti's in SLI
Storage	500GB Samsung 850 PCIe SSD, 4TB
Display(s)	27" Asus 144Hz
Case	Enermax Fulmo GT
Audio Device(s)	ON BOARD FTW
Power Supply	Corsair 1200W
Keyboard	Logitech G510
Software	Win 10 64x

System Name	The work PC /2700x/5950x
Processor	3900X stock/ 2700x stock/ 5950x 4200 MHz fixed @ 1,056-1,08V
Motherboard	Gigabyte AORUS Master X570/2xMSI X470 M7 AC
Cooling	Custom WC XSPC RX480, Laing DDC, XSPC Laing DDC Top V3 and EK Velocity/NH15/NH-U12S SE
Memory	32 GB Viper 3600/14 /16 GB Trident Z F4-4000C18D-16GTZSW 3600 /32 GB G Skill Flare CL14 3400
Video Card(s)	2070 Super X MSI/GTX 970 MSI/ GTX 970 MSI
Storage	1 TB SSD+500 GB NVMe / 500 GB SSD/ 500 GB SSD
Display(s)	Dell UltraSharp U2518D/2408WFP
Case	Corsair 800D / Lian test bench/NZXT 500
Power Supply	AX 850 Titanium/AX 860i/AX 760
Software	Dual boot/Win 7 & 10 / Linux / Win 10

System Name	Nexus PC
Processor	Intel Xeon E3-1231 v3, 3600 MHz
Motherboard	Gigabyte GA-H97-HD3
Cooling	Thermalright Macho V2
Memory	24GB DDR3, 1400MHZ CL8
Video Card(s)	Sapphire Radeon R9 290
Storage	Samsung EVO 960 250gb, EVO 850 250gb, Vertex 3 128gb. 2 TB of Rotational.
Display(s)	1xAsus MX299, 2x Asus MX239, Oculus Rift CV1
Case	Sunflower Tower
Audio Device(s)	C-Media CMI8738/C3DX
Power Supply	Corsair TX850
Mouse	Cyborg R.A.T. 7
Software	Win7 64Bit Ultimate

Ghetto Mods

OnBoard

New Member

Radical_Edward

mlee49

mstenholm

Velvet Wafer

mlee49

pantherx12

dr emulator (madmax)

Thrackan

pantherx12

Taz100420

ehume

Radical_Edward

Velvet Wafer

Radical_Edward

ehume

Velvet Wafer

OnBoard

New Member

Radical_Edward

p_o_s_pc

F@H&WCG addict

Thrackan

mlee49

[Ion]

WCG Team Assistant

d3fct

DaveK

System Name	My pc
Processor	Ryzen 5 3600
Motherboard	Asus Rog b450-f
Cooling	Cooler master 120mm aio
Memory	16gb ddr4 3200mhz
Video Card(s)	MSI Ventus 3x 3070
Storage	2tb intel nvme and 2tb generic ssd
Display(s)	Generic dell 1080p overclocked to 75hz
Case	Phanteks enthoo
Power Supply	650w of borderline fire hazard
Mouse	Some wierd Chinese vertical mouse
Keyboard	Generic mechanical keyboard
Software	Windows ten

System Name	not very good (wants throwing out window most of time)
Processor	xp3000@ 2.17ghz pile of sh** /i7 920 DO on air for now
Motherboard	msi kt6 delta oap /gigabyte x58 ud7 (rev1.0)
Cooling	1 green akasa 8cm(rear) 1 multicoloured akasa(hd) 1 12 cm (intake) 1 9cm with circuit from old psu
Memory	1.25 gb kingston hyperx @333mhz/ 3gb corsair dominator xmp 1600mhz
Video Card(s)	(agp) hd3850 not bad not really suitable for mobo n processor/ gb hd5870
Storage	wd 320gb + samsung 320 gig + wd 1tb 6gb/s
Display(s)	compaq mv720
Case	thermaltake XaserIII skull / coolermaster cm 690II
Audio Device(s)	onboard
Power Supply	corsair hx 650 w which solved many problems (blew up) /850w corsair
Software	xp pro sp3/ ? win 7 ultimate (32 bit)
Benchmark Scores	6543 3d mark05 ye ye not good but look at the processor /uknown as still not benched

System Name	Acer Aspire V3-771G-53218G75Maii
Processor	Core i5 3210M (2,5-3,1Ghz)
Memory	8GB DDR3 SODIMM
Video Card(s)	Geforce GT650M
Storage	Samsung 830 256GB - 750GB Toshiba drive
Software	Windows 7 x64 Home Premium (non-acer-bloatware)

System Name	The Darkside
Processor	Ryzen 5 3600
Motherboard	ASRock B550 Extreme4
Cooling	OEM
Memory	16gb G.Skill Fortis
Video Card(s)	MSI Seahawk 1070
Storage	500gb Mushkin Pilot NVMe
Display(s)	55" Samsung 4k UHD
Case	Corsair iCue 465X RGB
Audio Device(s)	Onboard Reltek
Power Supply	Corsair AX860i
Software	Windows 10

System Name	alpha
Processor	Intel Core i7 4770k
Motherboard	Gigabyte GA-Z87X-UD4H
Cooling	Prolimatech Armageddon with 2 NF-A15's
Memory	2x4GB Crucial Sport
Video Card(s)	integrated HD 4600
Storage	Samsung 840 Pro 512GB
Display(s)	Acer KN242HYL
Case	fractal design Define R5
Audio Device(s)	headphones
Power Supply	Seasonic x-750
Mouse	Logtech Performance MX (wireless)
Keyboard	Logitech G810 (backlit wired)
Software	Win7-64

System Name	el'lappy\|Cruncher \| Cruncher 2
Processor	intel C2D T6400 \| i7 3770k @4.2ghz \| AII X2 220 @3.4ghz
Motherboard	some Acer \| Asus P8Z77-V Pro \|Gigabyter GA-M61p-S3
Cooling	dual 80mm cooling fan \| WC'ing ) \|cheapo
Memory	2x2gb ddr3 \| 2x2gb Ripjaws 1600 \|4x512mb D9s
Video Card(s)	onboard \| 60 1GB(hd7770 ) \|8800GTS
Storage	Momuntus xt 320gb \|Kingston Hyper X 120gb SATA III\|500gb WD
Display(s)	17in \| 42" 1080P HD 3D TV
Case	lappy case \| CM HAF XB \|none yet
Audio Device(s)	onboard \| onboard \| onboard
Power Supply	Dell brick w/ acer end end \| Antec EW 650w \|Antec SP 350w(upg.soon)
Software	Windows 7 Ult. 64bit---->------->

System Name	Niedersachsen / Ribe / Minsk
Processor	i3 3240 / i7-3520M / 4x Opteron 6376 @ 2.86GHz
Motherboard	BIOSTAR H61M / HP Q77 / Supermicro H8QG7
Cooling	Stock / Stock / 4x 1U G34
Memory	1x8GB / 2x4GB / 4x4GB
Video Card(s)	GTX260 / Intel HD 4000 / nVidia GT310
Storage	80GB Intel SSD / 256GB Intel SSD / 2x 60GB SSD (RAID1)
Display(s)	Dell 3007 + HP 2245w / 12.1" 1366x768 / None
Case	Antec NSK3480 / HP / Supermicro 1U
Audio Device(s)	Onboard
Power Supply	Enermax 500W / HP 130W / Supermicro Gold 1400W
Keyboard	IBM Model M
Software	Windows 7 (Niedersachsen/Ribe) / Linux Mint 17.2 (Minsk)

System Name	no remorse
Processor	i7 2600k @ 4.7 ht on
Motherboard	gigabyte z68x-ud3p-b3
Cooling	xspc rasa cpu block, bitspower restop, mcp355
Memory	4 x 4gb corsair vengance 1600 8-8-8-24
Video Card(s)	570 gtx
Storage	2x32 gb patriot ssd's in raid 0 (os & games) / 2 x 500gb barracuda (storage)
Display(s)	25 inch 1080p widescreen i-inc
Case	cooler master haf x
Audio Device(s)	turtle beach earforce px21 headset (usb)
Power Supply	corsair HX850
Benchmark Scores	super pi 1m : 7.160 sec. 34,837 3dmark06

System Name	The Beast
Processor	Intel Core i3-2100 @ 3.1GHz
Motherboard	Asus P8P67 LE
Cooling	Stock
Memory	4GB Corsair Vengeance DDR3 @ 1600MHz
Video Card(s)	1GB Sapphire Radeon HD4650 Ultimate Edition
Storage	60GB Corsair Force LE, 1TB Samsung SpinPoint F1, 500GB Seagate
Display(s)	22" Samsung T220HD & 19" Acer X193W
Case	Corsair Obsidian 750D
Power Supply	Corsair HX650W
Software	Windows 7 Ultimate x64