• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Ghetto Mods

p_o_s_pc

F@H&WCG addict
Joined
May 2, 2007
Messages
13,006 (2.11/day)
Location
Newark ohio
System Name el'lappy|Cruncher | Cruncher 2
Processor intel C2D T6400 | i7 3770k @4.2ghz | AII X2 220 @3.4ghz
Motherboard some Acer | Asus P8Z77-V Pro |Gigabyter GA-M61p-S3
Cooling dual 80mm cooling fan | WC'ing ) |cheapo
Memory 2x2gb ddr3 | 2x2gb Ripjaws 1600 |4x512mb D9s
Video Card(s) onboard | 60 1GB(hd7770 ) |8800GTS
Storage Momuntus xt 320gb |Kingston Hyper X 120gb SATA III|500gb WD
Display(s) 17in | 42" 1080P HD 3D TV
Case lappy case | CM HAF XB |none yet
Audio Device(s) onboard | onboard | onboard
Power Supply Dell brick w/ acer end end | Antec EW 650w |Antec SP 350w(upg.soon)
Software Windows 7 Ult. 64bit---->------->
That is so epic! Although why not add a 80mm fan? :p

a 80mm fan is bigger then the adapter is its self :laugh:I was thinking about putting a 40mm fan into it and run it at 5v along with the staples but i couldn't find the fan or a way to cut the plastic case.:p
 
Joined
Jan 2, 2007
Messages
601 (0.10/day)
Location
Under Columbus, Ohio
System Name Gen0cide
Processor AMD Phenom x4 920 2.8 @ 3.36 1.44v
Motherboard Asus M2N-Deluxe + WiFi
Cooling Thermoright True Rev C
Memory 2x 2gig of Gskill DDR2 1066 @ 5-5-5-15 20 2.125v
Video Card(s) Gigabyte 250 GTS 1 Gig
Storage 5x 730gig 7,200 RPM Raid 5 Western Digital Black
Display(s) Neovo F-417
Case Antec Twelve Hundred
Audio Device(s) On-Board
Power Supply SeaSonic M12 SS-600HM
Software Windows 7 x64 / Arch Linux-fluxbox(duel Boot)

p_o_s_pc

F@H&WCG addict
Joined
May 2, 2007
Messages
13,006 (2.11/day)
Location
Newark ohio
System Name el'lappy|Cruncher | Cruncher 2
Processor intel C2D T6400 | i7 3770k @4.2ghz | AII X2 220 @3.4ghz
Motherboard some Acer | Asus P8Z77-V Pro |Gigabyter GA-M61p-S3
Cooling dual 80mm cooling fan | WC'ing ) |cheapo
Memory 2x2gb ddr3 | 2x2gb Ripjaws 1600 |4x512mb D9s
Video Card(s) onboard | 60 1GB(hd7770 ) |8800GTS
Storage Momuntus xt 320gb |Kingston Hyper X 120gb SATA III|500gb WD
Display(s) 17in | 42" 1080P HD 3D TV
Case lappy case | CM HAF XB |none yet
Audio Device(s) onboard | onboard | onboard
Power Supply Dell brick w/ acer end end | Antec EW 650w |Antec SP 350w(upg.soon)
Software Windows 7 Ult. 64bit---->------->
here is something dug out of my photobucket
had a chipset problem...It was a Nforce and kept over heating
 
Joined
May 27, 2008
Messages
3,628 (0.63/day)
System Name Ultra 64
Processor NEC VR4300 (MIPS R4300i)
Motherboard proprietary design
Cooling Fanless aircooled
Memory 4.5MB 250 MHz RDRAM
Video Card(s) 62.5 MHz Reality Coprocessor
Storage 32 - 512 Mbit ROM Cartridge
Display(s) 720x576
Case Clear Blue Funtastic
Audio Device(s) 16-bit CD quality
Power Supply proprietary design
Mouse N64 mouse for use with N64DD
Keyboard N64 keyboard for use with N64DD
Joined
Mar 7, 2007
Messages
3,842 (0.62/day)
Location
Maryland
System Name HAL
Processor Core i9 13900k @5.8-6.1
Motherboard Z790 Arous master
Cooling EKWB Quantum Velocity V2 & (2) 360 Corsair XR7 Rads push/pull
Memory 2x 32GB (64GB) Gskill trident 6000 CL30 @28 1T
Video Card(s) RTX 4090 Gigagbyte gaming OC @ +200/1300
Storage (M2's) 2x Samsung 980 pro 2TB, 1xWD Black 2TB, 1x SK Hynix Platinum P41 2TB
Display(s) 65" LG OLED 120HZ
Case Lian Li dyanmic Evo11 with distro plate
Power Supply Thermaltake 1350
Software Microsoft Windows 11 x64
Dang I need a camera..lol. Took the main fan of my macs thermo cooler because it was weak.
Placed a Antec fan in it's place but at the rear, sucking air out from the back.
Wedged it into place with the macs metal frame.
Then took a pci fan cooler with 2 fans and laid it vertical in the front of the macs. Folded the metal casing from the macs around the fan to hold it in place. so now it pushes air across my memory, my cpu and my gpu. Looks neat too. :)
 
Joined
May 15, 2008
Messages
2,863 (0.49/day)
Location
Brasil
System Name Sovereign // HTPC
Processor i7 3770k 4.2 // i7 3770k 4.2
Motherboard Maximus V Gene // Sabertooth Z77
Cooling Noctua D14 // Intel HSF
Memory 16GB Samsung // 16GB VengeanceLP
Video Card(s) Deciding // 660 DC2
Storage OS (X25-M), Data (Seagate 1TB) // Samsung 840 120GB & bunch of drives
Display(s) Samsung T240HD // LG TV
Case TJ08e // Grandia GD08
Audio Device(s) DT880 Pro 250 ohm // TV speakers
Power Supply Seasonic Plat 1000 // Seasonic Gold 760
Software Windows 8 Pro x64 // Windows 7 Pro x64
Joined
Mar 7, 2007
Messages
3,842 (0.62/day)
Location
Maryland
System Name HAL
Processor Core i9 13900k @5.8-6.1
Motherboard Z790 Arous master
Cooling EKWB Quantum Velocity V2 & (2) 360 Corsair XR7 Rads push/pull
Memory 2x 32GB (64GB) Gskill trident 6000 CL30 @28 1T
Video Card(s) RTX 4090 Gigagbyte gaming OC @ +200/1300
Storage (M2's) 2x Samsung 980 pro 2TB, 1xWD Black 2TB, 1x SK Hynix Platinum P41 2TB
Display(s) 65" LG OLED 120HZ
Case Lian Li dyanmic Evo11 with distro plate
Power Supply Thermaltake 1350
Software Microsoft Windows 11 x64
Joined
Oct 7, 2008
Messages
1,888 (0.33/day)
System Name The Beast
Processor Intel Core i3-2100 @ 3.1GHz
Motherboard Asus P8P67 LE
Cooling Stock
Memory 4GB Corsair Vengeance DDR3 @ 1600MHz
Video Card(s) 1GB Sapphire Radeon HD4650 Ultimate Edition
Storage 60GB Corsair Force LE, 1TB Samsung SpinPoint F1, 500GB Seagate
Display(s) 22" Samsung T220HD & 19" Acer X193W
Case Corsair Obsidian 750D
Power Supply Corsair HX650W
Software Windows 7 Ultimate x64
lol awesome, I bet everything runs nice and cool. I bet there's barely any dust too :p
 
Joined
Jan 2, 2007
Messages
601 (0.10/day)
Location
Under Columbus, Ohio
System Name Gen0cide
Processor AMD Phenom x4 920 2.8 @ 3.36 1.44v
Motherboard Asus M2N-Deluxe + WiFi
Cooling Thermoright True Rev C
Memory 2x 2gig of Gskill DDR2 1066 @ 5-5-5-15 20 2.125v
Video Card(s) Gigabyte 250 GTS 1 Gig
Storage 5x 730gig 7,200 RPM Raid 5 Western Digital Black
Display(s) Neovo F-417
Case Antec Twelve Hundred
Audio Device(s) On-Board
Power Supply SeaSonic M12 SS-600HM
Software Windows 7 x64 / Arch Linux-fluxbox(duel Boot)
I bet it gets dusty as hell as it pushes all the air in lol
 

p_o_s_pc

F@H&WCG addict
Joined
May 2, 2007
Messages
13,006 (2.11/day)
Location
Newark ohio
System Name el'lappy|Cruncher | Cruncher 2
Processor intel C2D T6400 | i7 3770k @4.2ghz | AII X2 220 @3.4ghz
Motherboard some Acer | Asus P8Z77-V Pro |Gigabyter GA-M61p-S3
Cooling dual 80mm cooling fan | WC'ing ) |cheapo
Memory 2x2gb ddr3 | 2x2gb Ripjaws 1600 |4x512mb D9s
Video Card(s) onboard | 60 1GB(hd7770 ) |8800GTS
Storage Momuntus xt 320gb |Kingston Hyper X 120gb SATA III|500gb WD
Display(s) 17in | 42" 1080P HD 3D TV
Case lappy case | CM HAF XB |none yet
Audio Device(s) onboard | onboard | onboard
Power Supply Dell brick w/ acer end end | Antec EW 650w |Antec SP 350w(upg.soon)
Software Windows 7 Ult. 64bit---->------->

sbt01

New Member
Joined
Apr 7, 2010
Messages
4 (0.00/day)
Location
HU
Processor AMD PHENOM II x2 545 @ x4 3.6Ghz
Motherboard Gigabyte MT770-UD3 rev 2.0
Cooling Xigmatek BALDER SD1283
Memory 2x2GB KingMax DDR2 1066
Video Card(s) Sapphire ATi Radeon HD 4870 1GB
Storage old 250GB Samsung & 1TB Western Digital
Display(s) LG 1715S
Case old Mercury something dunno
Audio Device(s) on board
Power Supply Corsair VX450W
Software Win 7 ultimate 64bit
Joined
May 30, 2007
Messages
9,019 (1.47/day)
System Name Black Panther
Processor i9 9900k
Motherboard Gigabyte Z390 AORUS PRO Wifi 1.0
Cooling NZXT Kraken X72 360mm
Memory 2 x 8GB Corsair Vengeance RGB Pro DDR4 3600Mhz
Video Card(s) Palit RTX2080 Ti Dual 11GB DDR6
Storage Samsung EVO 970 500GB SSD M.2 & 2TB Seagate Barracuda 7200rpm
Display(s) 32'' Gigabyte G32QC 2560x1440 165Hz
Case NZXT H710i Black
Audio Device(s) Razer Electra V2 & Z5500 Speakers
Power Supply Seasonic Focus GX-850 Gold 80+
Mouse Some Corsair lost the box forgot the model
Keyboard Motospeed
Software Windows 10
Painted the drive cages black :)
I'm terrible with a paintbrush (that's why I posted in ghetto mods), but fortunately the paint-defects don't really show through the perspex :eek:


Before:



After one coat:



Second coat (not yet dry):
(No I didn't use any blue paint, that's my cellphone messing up):laugh:



With the side-window on. While I was at it I decorated my ram modules with banana leaves... :D



Close-up:



Put in place:
 
Joined
Nov 13, 2007
Messages
10,209 (1.71/day)
Location
Austin Texas
Processor 13700KF Undervolted @ 5.6/ 5.5, 4.8Ghz Ring 200W PL1
Motherboard MSI 690-I PRO
Cooling Thermalright Peerless Assassin 120 w/ Arctic P12 Fans
Memory 48 GB DDR5 7600 MHZ CL36
Video Card(s) RTX 4090 FE
Storage 2x 2TB WDC SN850, 1TB Samsung 960 prr
Display(s) Alienware 32" 4k 240hz OLED
Case SLIGER S620
Audio Device(s) Yes
Power Supply Corsair SF750
Mouse Xlite V2
Keyboard RoyalAxe
Software Windows 11
Benchmark Scores They're pretty good, nothing crazy.
I superglued some rows of unused staples together to make a heatsink at work the other day. It worked friggin great!!

Made me think of this club :D.

Edit... a bit like what POS posted actually haha.
 
Joined
Jan 2, 2007
Messages
601 (0.10/day)
Location
Under Columbus, Ohio
System Name Gen0cide
Processor AMD Phenom x4 920 2.8 @ 3.36 1.44v
Motherboard Asus M2N-Deluxe + WiFi
Cooling Thermoright True Rev C
Memory 2x 2gig of Gskill DDR2 1066 @ 5-5-5-15 20 2.125v
Video Card(s) Gigabyte 250 GTS 1 Gig
Storage 5x 730gig 7,200 RPM Raid 5 Western Digital Black
Display(s) Neovo F-417
Case Antec Twelve Hundred
Audio Device(s) On-Board
Power Supply SeaSonic M12 SS-600HM
Software Windows 7 x64 / Arch Linux-fluxbox(duel Boot)
I superglued some rows of unused staples together to make a heatsink at work the other day. It worked friggin great!!

Made me think of this club :D.

Edit... a bit like what POS posted actually haha.

I thought that was pretty crazy
 

OnBoard

New Member
Joined
Sep 16, 2006
Messages
3,033 (0.47/day)
Location
Finland
Processor Core i5-750 @ 3.6GHz 1.136V 24/7
Motherboard Gigabyte P55A-UD3, SATA 6Gbit/s & USB3.0 baby!
Cooling Alpenföhn Brocken HeatpipeDirectTouch
Memory Geil Ultra Series 4GB 2133MHz DDR3 @ 1440MHz 7-7-7-24
Video Card(s) Gigabyte GTX 460 1GB OC (mostly stock speeds)
Storage OS: Samsung F3 500GB Games: Samsung F1 640GB
Display(s) new! Samsung P2350 23" FullHD 2ms / Mirai DTL-632E500 32" LCD
Case new! Xigmatek Midgard/Utgard side window with red cathodes, 1x140mm & 3x120mm fans
Audio Device(s) new! ASUS Xonar DG & JVC HA-RX700 headphones
Power Supply Cougar CM 700W Modular
Software Windows 7 Home Premium x64
Benchmark Scores Logitech UltraX Premium & G5 laser v2 + Ulti-mat Breathe X2 for fragging

Wouldn't you rather have the Zalman blow to the rear and not inside the PSU?
You can fit the mount thing trought the pipes and have it face the "right way" (used to have one of those) :)

Nice sticker collection on the second picture. I have a big collection of those but haven't come up where to put them. Computer desk might be an option, as it's not a moving part, like cases have been :)
 
Joined
Jul 20, 2008
Messages
4,016 (0.70/day)
Location
Ohio
System Name Desktop|| Virtual Host 0
Processor Intel Core i5 2500-K @ 4.3ghz || 2x Xeon L5630 (total 8 cores, 16 threads)
Motherboard ASUS P8Z68-V || Dell PowerEdge R710 (Intel 5520 chipset)
Cooling Corsair Hydro H100 || Stock hotplug fans and passive heatsinks
Memory 4x4gb Corsair Vengeance DDR3 1600 || 12x4gb Hynix DDR3 1066 FB-DIMMs
Video Card(s) MSI GTX 760 Gaming Twin Frozr 4GB OC || Don't know, don't care
Storage Hitachi 7K3000 2TB || 6x300gb 15k rpm SAS internal hotswap, 12x3tb Seagate NAS drives in enclosure
Display(s) ViewSonic VA2349S || remote iDRAC KVM console
Case Antec P280 || Dell PowerEdge R710
Audio Device(s) HRT MusicStreamer II+ and Focusrite Scarlett 18i8 || Don't know, don't care
Power Supply SeaSonic X650 Gold || 2x870w hot-swappable
Mouse Logitech G500 || remote iDRAC KVM console
Keyboard Logitech G510 || remote iDRAC KVM console
Software Win7 Ultimate x64 || VMware vSphere 6.0 with vCenter Server 6.0
Benchmark Scores Over 9000 on the scouter
Painted the drive cages black :)
I'm terrible with a paintbrush (that's why I posted in ghetto mods), but fortunately the paint-defects don't really show through the perspex :eek:
wait, you painted it with a paint brush instead of spray paint or something? :laugh: that's totally something I would do :D

It doesn't look bad through the window though, which is all that really matters for lans and shit, so good job.
 
Joined
May 30, 2007
Messages
9,019 (1.47/day)
System Name Black Panther
Processor i9 9900k
Motherboard Gigabyte Z390 AORUS PRO Wifi 1.0
Cooling NZXT Kraken X72 360mm
Memory 2 x 8GB Corsair Vengeance RGB Pro DDR4 3600Mhz
Video Card(s) Palit RTX2080 Ti Dual 11GB DDR6
Storage Samsung EVO 970 500GB SSD M.2 & 2TB Seagate Barracuda 7200rpm
Display(s) 32'' Gigabyte G32QC 2560x1440 165Hz
Case NZXT H710i Black
Audio Device(s) Razer Electra V2 & Z5500 Speakers
Power Supply Seasonic Focus GX-850 Gold 80+
Mouse Some Corsair lost the box forgot the model
Keyboard Motospeed
Software Windows 10
Wouldn't you rather have the Zalman blow to the rear and not inside the PSU?

I did have it that way before. But for some weird reason as it is now it reduces my cpu load temperatures by 2 or 3 degrees. :wtf: Must have got something to do with the positioning of the side and rear fans I guess?

Nice sticker collection on the second picture. I have a big collection of those but haven't come up where to put them. Computer desk might be an option, as it's not a moving part, like cases have been :)

I still have the 8600GTS sticker there :laugh:
I'm looking to get an ATI sticker (if they exist a 5970 one) hmmm I tried ebay but with shipping it'd be like $6 for a sticker lol.

wait, you painted it with a paint brush instead of spray paint or something? :laugh: that's totally something I would do :D

It doesn't look bad through the window though, which is all that really matters for lans and shit, so good job.

Lol yes it's with a small paintbrush. I didn't use strokes but 'sponged' the brush to get a textured mat effect. Now that it's dry and mat it doesn't look bad at all :)
The actual paint I used helped me a lot, because it's thick and doesn't dribble...

I import automotive paint products myself, in the right hands a modder would have a feast with all the products and colours:ohwell:. I could have used automotive 2k paint but in my hands it'd drip and I'd shoot spots of paint all over when doing a curve with the bristles of the paintbrush. (Which is sad considering that I know all the theory how to finish a car from bare-metal...)

So I just used a random mat thick strong primer which use is not really to paint the insides of pc cases (and I didn't dilute it):D


"Zinc chromate-lead FREE anticorrosive primer with a high zinc content. Suitable for Spot and Mig Welding with excellent metal protection. Can be applied with a brush, roller or spray gun (1,4 - 1,8 mm nozzle diameter). Applied at a maximum thickness of 10-20 µ m, (0,4 – 0,8 mils). It can be diluted 25-30% with nitro thinner (reducer) BODY ECO THINN."

I think years will pass before this hdd cage shows any signs of corrosion :laugh:
 
Joined
Jul 20, 2008
Messages
4,016 (0.70/day)
Location
Ohio
System Name Desktop|| Virtual Host 0
Processor Intel Core i5 2500-K @ 4.3ghz || 2x Xeon L5630 (total 8 cores, 16 threads)
Motherboard ASUS P8Z68-V || Dell PowerEdge R710 (Intel 5520 chipset)
Cooling Corsair Hydro H100 || Stock hotplug fans and passive heatsinks
Memory 4x4gb Corsair Vengeance DDR3 1600 || 12x4gb Hynix DDR3 1066 FB-DIMMs
Video Card(s) MSI GTX 760 Gaming Twin Frozr 4GB OC || Don't know, don't care
Storage Hitachi 7K3000 2TB || 6x300gb 15k rpm SAS internal hotswap, 12x3tb Seagate NAS drives in enclosure
Display(s) ViewSonic VA2349S || remote iDRAC KVM console
Case Antec P280 || Dell PowerEdge R710
Audio Device(s) HRT MusicStreamer II+ and Focusrite Scarlett 18i8 || Don't know, don't care
Power Supply SeaSonic X650 Gold || 2x870w hot-swappable
Mouse Logitech G500 || remote iDRAC KVM console
Keyboard Logitech G510 || remote iDRAC KVM console
Software Win7 Ultimate x64 || VMware vSphere 6.0 with vCenter Server 6.0
Benchmark Scores Over 9000 on the scouter
I did have it that way before. But for some weird reason as it is now it reduces my cpu load temperatures by 2 or 3 degrees. :wtf: Must have got something to do with the positioning of the side and rear fans I guess?
I've actually seen that cooler and a lot of others oriented like that quite often. I think it has something to do with helping the airflow to be more of upward current or something, idk. I remember reading a test about fan positioning where a guy tried all sorts of configs and actually got some of the best results with nothing but a top or rear exhaust, believe it or not.
Lol yes it's with a small paintbrush. I didn't use strokes but 'sponged' the brush to get a textured mat effect. Now that it's dry and mat it doesn't look bad at all :)
The actual paint I used helped me a lot, because it's thick and doesn't dribble...

I import automotive paint products myself, in the right hands a modder would have a feast with all the products and colours:ohwell:. I could have used automotive 2k paint but in my hands it'd drip and I'd shoot spots of paint all over when doing a curve with the bristles of the paintbrush. (Which is sad considering that I know all the theory how to finish a car from bare-metal...)

So I just used a random mat thick strong primer which use is not really to paint the insides of pc cases (and I didn't dilute it):D

http://img.techpowerup.org/100424/bodyzinc_600x451.jpg


I think years will pass before this hdd cage shows any signs of corrosion :laugh:
LOL that's totally awesome. I probably would've been really ghetto and grabbed the cheapest shit from a craft store or just steal some paint (like the kind you paint a picture with) from my mom and be like a kid painting something they made in art class.

Of course, that would only be after trying to use a sharpie and realizing how crappy that looks.:laugh:
 

OnBoard

New Member
Joined
Sep 16, 2006
Messages
3,033 (0.47/day)
Location
Finland
Processor Core i5-750 @ 3.6GHz 1.136V 24/7
Motherboard Gigabyte P55A-UD3, SATA 6Gbit/s & USB3.0 baby!
Cooling Alpenföhn Brocken HeatpipeDirectTouch
Memory Geil Ultra Series 4GB 2133MHz DDR3 @ 1440MHz 7-7-7-24
Video Card(s) Gigabyte GTX 460 1GB OC (mostly stock speeds)
Storage OS: Samsung F3 500GB Games: Samsung F1 640GB
Display(s) new! Samsung P2350 23" FullHD 2ms / Mirai DTL-632E500 32" LCD
Case new! Xigmatek Midgard/Utgard side window with red cathodes, 1x140mm & 3x120mm fans
Audio Device(s) new! ASUS Xonar DG & JVC HA-RX700 headphones
Power Supply Cougar CM 700W Modular
Software Windows 7 Home Premium x64
Benchmark Scores Logitech UltraX Premium & G5 laser v2 + Ulti-mat Breathe X2 for fragging
I did have it that way before. But for some weird reason as it is now it reduces my cpu load temperatures by 2 or 3 degrees. :wtf: Must have got something to do with the positioning of the side and rear fans I guess?

Ah, if it's cooler that way then it's cool :cool:

Fans might have something to do with it. You can fit a 120mm in the rear too (had same insides on previous case). Goes between the 80mm fans and worked fine.

I've actually seen that cooler and a lot of others oriented like that quite often. I think it has something to do with helping the airflow to be more of upward current or something, idk. I remember reading a test about fan positioning where a guy tried all sorts of configs and actually got some of the best results with nothing but a top or rear exhaust, believe it or not.

Yep, I used to have a rear fan just behind the cooler and it was sort of a wind tunnel. Underpressure is the coolest version, but also sucks the most dust in, hence I prefer it even.
 
Joined
Jul 20, 2008
Messages
4,016 (0.70/day)
Location
Ohio
System Name Desktop|| Virtual Host 0
Processor Intel Core i5 2500-K @ 4.3ghz || 2x Xeon L5630 (total 8 cores, 16 threads)
Motherboard ASUS P8Z68-V || Dell PowerEdge R710 (Intel 5520 chipset)
Cooling Corsair Hydro H100 || Stock hotplug fans and passive heatsinks
Memory 4x4gb Corsair Vengeance DDR3 1600 || 12x4gb Hynix DDR3 1066 FB-DIMMs
Video Card(s) MSI GTX 760 Gaming Twin Frozr 4GB OC || Don't know, don't care
Storage Hitachi 7K3000 2TB || 6x300gb 15k rpm SAS internal hotswap, 12x3tb Seagate NAS drives in enclosure
Display(s) ViewSonic VA2349S || remote iDRAC KVM console
Case Antec P280 || Dell PowerEdge R710
Audio Device(s) HRT MusicStreamer II+ and Focusrite Scarlett 18i8 || Don't know, don't care
Power Supply SeaSonic X650 Gold || 2x870w hot-swappable
Mouse Logitech G500 || remote iDRAC KVM console
Keyboard Logitech G510 || remote iDRAC KVM console
Software Win7 Ultimate x64 || VMware vSphere 6.0 with vCenter Server 6.0
Benchmark Scores Over 9000 on the scouter
Over-pressure is great for keeping dust out since then air is escaping from all the little tiny openings everywhere instead of being sucked in. Not good for temps though.

I just wish there wasn't so much pressure on my fucking stomach right now. Not like gas, but likes it's being stretched out or something, I'm gonna go curl up in a ball now.
 

p_o_s_pc

F@H&WCG addict
Joined
May 2, 2007
Messages
13,006 (2.11/day)
Location
Newark ohio
System Name el'lappy|Cruncher | Cruncher 2
Processor intel C2D T6400 | i7 3770k @4.2ghz | AII X2 220 @3.4ghz
Motherboard some Acer | Asus P8Z77-V Pro |Gigabyter GA-M61p-S3
Cooling dual 80mm cooling fan | WC'ing ) |cheapo
Memory 2x2gb ddr3 | 2x2gb Ripjaws 1600 |4x512mb D9s
Video Card(s) onboard | 60 1GB(hd7770 ) |8800GTS
Storage Momuntus xt 320gb |Kingston Hyper X 120gb SATA III|500gb WD
Display(s) 17in | 42" 1080P HD 3D TV
Case lappy case | CM HAF XB |none yet
Audio Device(s) onboard | onboard | onboard
Power Supply Dell brick w/ acer end end | Antec EW 650w |Antec SP 350w(upg.soon)
Software Windows 7 Ult. 64bit---->------->
Over-pressure is great for keeping dust out since then air is escaping from all the little tiny openings everywhere instead of being sucked in. Not good for temps though.

I just wish there wasn't so much pressure on my fucking stomach right now. Not like gas, but likes it's being stretched out or something, I'm gonna go curl up in a ball now.

take a poop :wtf:
 
Joined
Jun 16, 2009
Messages
5,123 (0.95/day)
Location
North of Germany
System Name Nexus PC
Processor Intel Xeon E3-1231 v3, 3600 MHz
Motherboard Gigabyte GA-H97-HD3
Cooling Thermalright Macho V2
Memory 24GB DDR3, 1400MHZ CL8
Video Card(s) Sapphire Radeon R9 290
Storage Samsung EVO 960 250gb, EVO 850 250gb, Vertex 3 128gb. 2 TB of Rotational.
Display(s) 1xAsus MX299, 2x Asus MX239, Oculus Rift CV1
Case Sunflower Tower
Audio Device(s) C-Media CMI8738/C3DX
Power Supply Corsair TX850
Mouse Cyborg R.A.T. 7
Software Win7 64Bit Ultimate
Over-pressure is great for keeping dust out since then air is escaping from all the little tiny openings everywhere instead of being sucked in. Not good for temps though.

I just wish there wasn't so much pressure on my fucking stomach right now. Not like gas, but likes it's being stretched out or something, I'm gonna go curl up in a ball now.

you dont drink much alcohol do you? or eat vast amounts of fat food?
 

sNiPeRbOb

New Member
Joined
Jul 30, 2009
Messages
230 (0.04/day)
Location
MA
System Name MörderPanzer
Processor AMD Phenom II 940@3.3Ghz (200x16.5 1.35vcore)
Motherboard MSI K9N2 SLI Platinum
Cooling Koolance CPU-340, Swiftech MCR220 w/ Medium Yates, MCP655 Vario, 1/2-3/4 PC Blue Tubing
Memory Crucial DDR2 800 Ballistix (4X1GB)
Video Card(s) XFX HD4890 1GB
Storage WD Blue 500GB
Display(s) 22" Westinghouse
Case NZXT Panzerbox
Audio Device(s) Soundblaster XFi Gamer
Power Supply Rosewill 600w
Software W7
Joined
Aug 11, 2009
Messages
6,823 (1.28/day)
Location
Viking Land
System Name Ivy Biatch
Processor i5 3570K
Motherboard ASSRockzz z77TOTHEEXTREME!!!!
Cooling bleh
Memory 2x4gb crucial 1866
Video Card(s) HD7770, yes it does BF3
Storage 120gb Vertex
Display(s) 226BW
Case whats that, oh my table
Audio Device(s) stock onboard thing
Power Supply HX850W
Software 7
Top