- Joined
- Nov 27, 2007
- Messages
- 28,823 (4.81/day)
- Location
- Miami, Florida
Processor | AMD Ryzen 7 7800X3D |
---|---|
Motherboard | ASUS ROG Crosshair X670E Hero |
Cooling | ARCTIC Liquid Freezer III 360 A-RGB // X12 Phanteks D30-120 D-RGB Fans |
Memory | G.SKILL Trident Z5 Neo RGB Series (AMD Expo) DDR5 RAM 32GB (2x16GB) 6000MT/s CL30 |
Video Card(s) | ZOTAC Gaming GeForce RTX 4090 AMP Extreme AIRO |
Storage | Samsung Pro 980 2TB NVMe (OS and Games) // WD Black 10TB HDD (Storage) |
Display(s) | SAMSUNG 34-Inch SJ55W Ultrawide Gaming Monitor (LS34J550WQNXZA) – 75Hz Refresh WQHD Computer Monitor |
Case | Phanteks NV7 |
Power Supply | Seasonic Vertex GX-1200, 1200W 80+ Gold, ATX 3.0 |
Software | Windows 11 Pro |
Well, the last project as some of you might know, never really got done. I started off with i7, ended up with AMD, started off with one card, ended up with two of others. Just didn't work out. Now I shall try again. This will be a water cooled log in the future. I plan on doing a custom loop for the CPU only. I am having some slightly higher than expected temps on the NB on this board, I will attempt to fix by re applying new TIM and checking out the mounting system to make sure the HS is making full contact with the NB. If that doesn't solve the problem I will be water cooling the chipset as well.
I had this rig setup on a tech station to work on the case, but since I'm not going to be starting off as quick as I wanted to I decided to put it in the case now and start figuring out what I want to do with the case in the meantime. So for now here are the specs:
Project Phases:
-Phase 1 - Sleeving
Update #1
Update #2
Update #3 (re-did front panel connectors)
Update #4 (Finished and routed front panel connectors)
-Phase 2 - Water Cooling Components Placement
Update #1 (Lower Radiator Placement)
-Phase 3 - Cable Management
Update #1 (Pre-eliminary Cable routing)
Current state as of last update:
I had this rig setup on a tech station to work on the case, but since I'm not going to be starting off as quick as I wanted to I decided to put it in the case now and start figuring out what I want to do with the case in the meantime. So for now here are the specs:
Project Phases:
-Phase 1 - Sleeving
Update #1
Update #2
Update #3 (re-did front panel connectors)
Update #4 (Finished and routed front panel connectors)
-Phase 2 - Water Cooling Components Placement
Update #1 (Lower Radiator Placement)
-Phase 3 - Cable Management
Update #1 (Pre-eliminary Cable routing)
Current state as of last update:
Last edited: