• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Naturally Aspired PC WaterCooling Club

Joined
Aug 2, 2009
Messages
4,013 (0.75/day)
Yes, I'm pretty confident, now. My leak tests are getting shorter, and I can see myself getting to the point of "Looks good to me."
 
Joined
Nov 27, 2007
Messages
28,754 (4.82/day)
Location
Miami, Florida
Processor AMD Ryzen 7 7800X3D
Motherboard ASUS ROG Crosshair X670E Hero
Cooling EK FLT 240 DDC, x2 Black Ice Nemesis 360GTX, x1 EK-Quantum Surface P240, Phanteks D30-120 fans x9
Memory G.SKILL Trident Z5 Neo RGB Series (AMD Expo) DDR5 RAM 32GB (2x16GB) 6000MT/s CL30
Video Card(s) ZOTAC Gaming GeForce RTX 4090 AMP Extreme AIRO
Storage Samsung Pro 980 2TB NVMe (OS and Games) // WD Black 10TB HDD (Storage)
Display(s) Samsung 49" Ultrawide Gaming Monitor
Case Phanteks NV7
Power Supply ASUS Rog Thor 1200 Certified 1200W
Software Windows 11 64 Bit Home Edition
I agree with wile E on the leak testing theory! That's how I do it too!
 
Joined
Aug 19, 2008
Messages
567 (0.10/day)
Location
Finland
System Name I can't believe I bought that / HTPC
Processor i5-750 @ 3.5GHz 1.27v / P II 705e @ stock
Motherboard Asus P7P55D-E Evo / Asus M4A785D-M PRO
Cooling Corsair H100i / Air
Memory 4x2 Geil DDR3-2133 @ 1755 / 2x2 DDR2-800
Video Card(s) Asus GTX660 TI / Asus HD6670
Storage Crucial MX100 512GB + Spinpoint F1 750GB / Crucial m4 128GB + WD Green 1TB
Display(s) HP w2408h / Samsung 55" HDTV
Case CM 690 II Advanced / Silverstone GD02
Audio Device(s) Integrated
Power Supply Corsair AX850 / OCZ ModXstream 500W
Software Win 7 / Win 7
Well here's how it turned out. I like how easy it is to make it look tidy. Could use some more room between the motherboard tray and the side panel.
Most of the cables have been hidden inside the hdd bays, so if I add another rad on the bottom at some point, I'll have to get more creative.
One thing that I haven't found yet, is an adapter from 3-pin fan to sata power. The only reason I still have the older molex power cable is to power some fans and the pump.

Here's one without the GTX 460:



And here's one that's all finished:



Sadly I couldn't get a push-pull to fit on the top like I planned, but will have to do with this for now.
i5-750 loads @ 50c on stock speed.
 
Joined
Aug 5, 2007
Messages
2,320 (0.38/day)
Location
Australia
System Name All Ryze
Processor Ryzen 7 1700
Motherboard MSI X370 Pro Carbon
Cooling Air
Memory G-skill Flare x 16GB 2400MHz
Video Card(s) MSI 1080
Storage Intel 600p NVMe 512GB for OS , 1TB WD Black and a 4TB Toshiba
Display(s) BENQ PD3200U
Case Phanteks
Audio Device(s) Onboard
Power Supply Corsair 750W
Mouse Logitech G403 wired
Keyboard G19
Software Win 10 Pro
Looks very good Inioch. Where you worried when you turned it on for the first time? I was a bit worried about mine. But now I am getting ready for phase 2. Fitting an extra 2x120 RAD and a 5970 waterblock haha. I really enjoyed doing mine as it is something completely different.
 
Joined
Aug 19, 2008
Messages
567 (0.10/day)
Location
Finland
System Name I can't believe I bought that / HTPC
Processor i5-750 @ 3.5GHz 1.27v / P II 705e @ stock
Motherboard Asus P7P55D-E Evo / Asus M4A785D-M PRO
Cooling Corsair H100i / Air
Memory 4x2 Geil DDR3-2133 @ 1755 / 2x2 DDR2-800
Video Card(s) Asus GTX660 TI / Asus HD6670
Storage Crucial MX100 512GB + Spinpoint F1 750GB / Crucial m4 128GB + WD Green 1TB
Display(s) HP w2408h / Samsung 55" HDTV
Case CM 690 II Advanced / Silverstone GD02
Audio Device(s) Integrated
Power Supply Corsair AX850 / OCZ ModXstream 500W
Software Win 7 / Win 7
I'm always a bit worried when turning it on for the first time. This time especially, since there are no clamps. I trust the tubes to be on tightly enough and check on them every now and then.

I can't wait to see yours.
 
Joined
Aug 5, 2007
Messages
2,320 (0.38/day)
Location
Australia
System Name All Ryze
Processor Ryzen 7 1700
Motherboard MSI X370 Pro Carbon
Cooling Air
Memory G-skill Flare x 16GB 2400MHz
Video Card(s) MSI 1080
Storage Intel 600p NVMe 512GB for OS , 1TB WD Black and a 4TB Toshiba
Display(s) BENQ PD3200U
Case Phanteks
Audio Device(s) Onboard
Power Supply Corsair 750W
Mouse Logitech G403 wired
Keyboard G19
Software Win 10 Pro
Ok newbie wanting some help. I am waiting on tube for the moment and i may have just scored a waterblock for my motherboard too. And reading through peoples post's I am wondering about the best way to run it all. I am sure I am asking in the right place. Also will my pump strugle with all of this?
I have
2 2x120 mm RAD's
EK-CoolStream RAD XT
MCR220
1 CPU block
Apogee XT
1 5970 waterblock

1 chipset block

and a RES/PUMP combo
 

Easy Rhino

Linux Advocate
Staff member
Joined
Nov 13, 2006
Messages
15,436 (2.43/day)
Location
Mid-Atlantic
System Name Desktop
Processor i5 13600KF
Motherboard AsRock B760M Steel Legend Wifi
Cooling Noctua NH-U9S
Memory 4x 16 Gb Gskill S5 DDR5 @6000
Video Card(s) Gigabyte Gaming OC 6750 XT 12GB
Storage WD_BLACK 4TB SN850x
Display(s) Gigabye M32U
Case Corsair Carbide 400C
Audio Device(s) On Board
Power Supply EVGA Supernova 650 P2
Mouse MX Master 3s
Keyboard Logitech G915 Wireless Clicky
Software The Matrix
damn, craig that is an awesome setup! :rockout:
 
Joined
Aug 5, 2007
Messages
2,320 (0.38/day)
Location
Australia
System Name All Ryze
Processor Ryzen 7 1700
Motherboard MSI X370 Pro Carbon
Cooling Air
Memory G-skill Flare x 16GB 2400MHz
Video Card(s) MSI 1080
Storage Intel 600p NVMe 512GB for OS , 1TB WD Black and a 4TB Toshiba
Display(s) BENQ PD3200U
Case Phanteks
Audio Device(s) Onboard
Power Supply Corsair 750W
Mouse Logitech G403 wired
Keyboard G19
Software Win 10 Pro
Here's a pic of it taken with my webcam so please scuse the quality.
 
Joined
Aug 2, 2009
Messages
4,013 (0.75/day)
I love those "up skirt" angles. Makes everything look monumental.

I'm not familiar with that pump, but I'm sure it'll be fine. People seem to worry a lot about thier pumps, but I think any old thing will have enough head pressure and flow to make it through a few blocks and rads.
 
Joined
Aug 5, 2007
Messages
2,320 (0.38/day)
Location
Australia
System Name All Ryze
Processor Ryzen 7 1700
Motherboard MSI X370 Pro Carbon
Cooling Air
Memory G-skill Flare x 16GB 2400MHz
Video Card(s) MSI 1080
Storage Intel 600p NVMe 512GB for OS , 1TB WD Black and a 4TB Toshiba
Display(s) BENQ PD3200U
Case Phanteks
Audio Device(s) Onboard
Power Supply Corsair 750W
Mouse Logitech G403 wired
Keyboard G19
Software Win 10 Pro
I love those "up skirt" angles. Makes everything look monumental.

I'm not familiar with that pump, but I'm sure it'll be fine. People seem to worry a lot about thier pumps, but I think any old thing will have enough head pressure and flow to make it through a few blocks and rads.

My only other concern is the way I tube it up. I do not want certain things affecting temps. I would like to know the best way to run it.
EDIT and the tubing i speak of is black so I can give the whole lot a good flush and be gone with that cacky green dye.
I can make the second Rad fit in the front of the case under the front bezel.
 
Last edited:
Joined
Aug 19, 2008
Messages
567 (0.10/day)
Location
Finland
System Name I can't believe I bought that / HTPC
Processor i5-750 @ 3.5GHz 1.27v / P II 705e @ stock
Motherboard Asus P7P55D-E Evo / Asus M4A785D-M PRO
Cooling Corsair H100i / Air
Memory 4x2 Geil DDR3-2133 @ 1755 / 2x2 DDR2-800
Video Card(s) Asus GTX660 TI / Asus HD6670
Storage Crucial MX100 512GB + Spinpoint F1 750GB / Crucial m4 128GB + WD Green 1TB
Display(s) HP w2408h / Samsung 55" HDTV
Case CM 690 II Advanced / Silverstone GD02
Audio Device(s) Integrated
Power Supply Corsair AX850 / OCZ ModXstream 500W
Software Win 7 / Win 7
Nice looking set there Craig! I had a similiar setup before wit 2x240 rads, cpu+gpu blocks. My pump is dTek DB-1 and it had plenty enough for a setup like that.

Also I'm becoming even more convinced that in the long run loop order doesn't matter too much. I like to keep a rad before cpu or gpu, but if some other order makes your tubing shorter and easier, then go for that.
 

t_ski

Former Staff
Joined
Apr 11, 2006
Messages
11,960 (1.82/day)
System Name My i7 Beast
Processor Intel Core i7 6800K
Motherboard Asus X99-A II
Cooling Nickel-plated EK Supremacy EVO, D5 with XSPC Bayres & BIX Quad Radiator
Memory 4 x 8GB EVGA SuperSC DDR4-3200
Video Card(s) EVGA 1080 SuperClocked
Storage Samsung 950 Pro 256GB m.2 SSD + 480GB Sandisk storage SSD
Display(s) Three Asus 24" VW246H LCD's
Case Silverstone TJ07
Audio Device(s) Onboard
Power Supply Corsair AX1200
Keyboard Corsair K95
Software Windows 10 x64 Pro
I can make the second Rad fit in the front of the case under the front bezel.

Just curious as to how oyu are going to make this happen. I have a Spedo Advanced as well, and I'm not sure how it would fit, especially with the 140mm fan there. However, if your modding skills are any good, you probably can replace the top 220mm fan with a couple 120's and mount the rad up there. I'll see if I can come up with some tube routing ideas. Pump going in the same spot it is now?
 
Joined
Aug 2, 2009
Messages
4,013 (0.75/day)
I have a 230mm pulling over my top mounted rad, with 2 120s pushing, works great. The 230mm almost covers the whole rad.
 
Joined
Oct 8, 2009
Messages
2,047 (0.39/day)
Location
Republic of Texas
Processor R9 5950x
Motherboard Asus x570 Crosshair VIII Formula
Cooling EK 360mm AIO D-RGB
Memory G.Skill Trident Z Neo 2x16gb (CL16@3800MHz)
Video Card(s) PNY GeForce RTX 3090 24GB
Storage Samsung 970 EVO Plus 1TB NVMe | Intel 660p 2TB NVMe
Display(s) Acer Predator XB323QK 4K 144Hz
Case Corsair 5000D Airflow
Audio Device(s) Objective2 Amp/DAC | GoXLR | AKG K612PRO | Beyerdynamic DT880| Rode Pod Mic
Power Supply Corsair AX 850w
Mouse Razer DeathAdder Elite V2
Keyboard Corsair K95 Platinum RGB "Cherry MX Brown"
VR HMD Oculus Rift
Software Window 11 Pro
hmm shoulda join this club long time ago lol :cool:

im already thinking putting my third rig under h20 :nutkick:



 
Joined
May 21, 2008
Messages
4,113 (0.71/day)
Location
Iowa, USA
System Name THE CUBE 2.0
Processor Intel i5 13600k
Motherboard MSI MPG Z690 EDGE DDR4
Cooling Phanteks PH-TC14PE BK 2x T30-120 Fan mod mount
Memory G.Skill TridentZ 3200 MT/s C15 32GB 2x16GB
Video Card(s) Gigabyte Aorus 1080 Ti 11GB OC: Core 2GHz, Mem 5.7GHz
Storage WD SN770 250GB / 3x WD SN850X 2TB / Toshiba X300 4TB / 2x RAID1 Toshiba P300 3TB
Display(s) Samsung 49" Odyssey OLED G95SC 240Hz 5120 x 1440
Case "THE CUBE" Custom built, pure Red Alder wood
Audio Device(s) Beyerdynamic DT 880
Power Supply Corsair RM1000X
Mouse Logitech G700
Keyboard Logitech G910
Software Windows 11 Pro

DOM

Joined
May 30, 2006
Messages
7,628 (1.17/day)
Location
TX, USA
Processor Intel i7 4770K
Motherboard Asrock
Cooling Water
Memory Team Xtreem LV 16GB (2x8GB)
Video Card(s) EK Full WB HD7970
Display(s) CROSSOVER 27Q LED-P 27"
Case Danger Den Torture Rack
Audio Device(s) Onboard
Power Supply CORSAIR Professional Series Gold AX1200
Software W 10 Pro

t_ski

Former Staff
Joined
Apr 11, 2006
Messages
11,960 (1.82/day)
System Name My i7 Beast
Processor Intel Core i7 6800K
Motherboard Asus X99-A II
Cooling Nickel-plated EK Supremacy EVO, D5 with XSPC Bayres & BIX Quad Radiator
Memory 4 x 8GB EVGA SuperSC DDR4-3200
Video Card(s) EVGA 1080 SuperClocked
Storage Samsung 950 Pro 256GB m.2 SSD + 480GB Sandisk storage SSD
Display(s) Three Asus 24" VW246H LCD's
Case Silverstone TJ07
Audio Device(s) Onboard
Power Supply Corsair AX1200
Keyboard Corsair K95
Software Windows 10 x64 Pro
My only other concern is the way I tube it up. I do not want certain things affecting temps. I would like to know the best way to run it.
EDIT and the tubing i speak of is black so I can give the whole lot a good flush and be gone with that cacky green dye.
I can make the second Rad fit in the front of the case under the front bezel.

You might be able to use a similar setup to mine, considering the blocks are very similar:

 
Joined
Oct 8, 2009
Messages
2,047 (0.39/day)
Location
Republic of Texas
Processor R9 5950x
Motherboard Asus x570 Crosshair VIII Formula
Cooling EK 360mm AIO D-RGB
Memory G.Skill Trident Z Neo 2x16gb (CL16@3800MHz)
Video Card(s) PNY GeForce RTX 3090 24GB
Storage Samsung 970 EVO Plus 1TB NVMe | Intel 660p 2TB NVMe
Display(s) Acer Predator XB323QK 4K 144Hz
Case Corsair 5000D Airflow
Audio Device(s) Objective2 Amp/DAC | GoXLR | AKG K612PRO | Beyerdynamic DT880| Rode Pod Mic
Power Supply Corsair AX 850w
Mouse Razer DeathAdder Elite V2
Keyboard Corsair K95 Platinum RGB "Cherry MX Brown"
VR HMD Oculus Rift
Software Window 11 Pro
I'm a sucker for blue tubing. Very nice rigs.

@ERazer - Are those 3 Gentle Typhoons in the first one?

yes sir, best fan i ever bought, got em for 15$ when sidewinders got sale
 
Joined
Nov 27, 2007
Messages
28,754 (4.82/day)
Location
Miami, Florida
Processor AMD Ryzen 7 7800X3D
Motherboard ASUS ROG Crosshair X670E Hero
Cooling EK FLT 240 DDC, x2 Black Ice Nemesis 360GTX, x1 EK-Quantum Surface P240, Phanteks D30-120 fans x9
Memory G.SKILL Trident Z5 Neo RGB Series (AMD Expo) DDR5 RAM 32GB (2x16GB) 6000MT/s CL30
Video Card(s) ZOTAC Gaming GeForce RTX 4090 AMP Extreme AIRO
Storage Samsung Pro 980 2TB NVMe (OS and Games) // WD Black 10TB HDD (Storage)
Display(s) Samsung 49" Ultrawide Gaming Monitor
Case Phanteks NV7
Power Supply ASUS Rog Thor 1200 Certified 1200W
Software Windows 11 64 Bit Home Edition
Awesome rigs Erazer :respect:
 
Joined
Aug 5, 2007
Messages
2,320 (0.38/day)
Location
Australia
System Name All Ryze
Processor Ryzen 7 1700
Motherboard MSI X370 Pro Carbon
Cooling Air
Memory G-skill Flare x 16GB 2400MHz
Video Card(s) MSI 1080
Storage Intel 600p NVMe 512GB for OS , 1TB WD Black and a 4TB Toshiba
Display(s) BENQ PD3200U
Case Phanteks
Audio Device(s) Onboard
Power Supply Corsair 750W
Mouse Logitech G403 wired
Keyboard G19
Software Win 10 Pro
Just curious as to how oyu are going to make this happen. I have a Spedo Advanced as well, and I'm not sure how it would fit, especially with the 140mm fan there. However, if your modding skills are any good, you probably can replace the top 220mm fan with a couple 120's and mount the rad up there. I'll see if I can come up with some tube routing ideas. Pump going in the same spot it is now?

Thanks t_ski ,
The Pump/Res is staying where is it now. But the plastic that it is sitting on now is going to be replaced by a steel support custom made by yours truly. It will be made with enough clearence for the RAD to go in between the 140mm fan and the Pump/Res. You know what I mean James Dean?

hmm shoulda join this club long time ago lol :cool:

im already thinking putting my third rig under h20 :nutkick:

http://img.techpowerup.org/100715/CIMG0251.jpg

http://img.techpowerup.org/100814/CIMG0381.jpg

Nice setups ERazer
 
Last edited:
Joined
Dec 27, 2007
Messages
8,518 (1.43/day)
Location
Kansas City
System Name The Dove Box Rev 3.0
Processor i7 8700k @ 4.7GHz
Motherboard Asus Maximus X APEX
Cooling Custom water loop
Memory 16GB 3600 MHz DDR4
Video Card(s) 2x MSI 780 Ti's in SLI
Storage 500GB Samsung 850 PCIe SSD, 4TB
Display(s) 27" Asus 144Hz
Case Enermax Fulmo GT
Audio Device(s) ON BOARD FTW
Power Supply Corsair 1200W
Keyboard Logitech G510
Software Win 10 64x

t_ski

Former Staff
Joined
Apr 11, 2006
Messages
11,960 (1.82/day)
System Name My i7 Beast
Processor Intel Core i7 6800K
Motherboard Asus X99-A II
Cooling Nickel-plated EK Supremacy EVO, D5 with XSPC Bayres & BIX Quad Radiator
Memory 4 x 8GB EVGA SuperSC DDR4-3200
Video Card(s) EVGA 1080 SuperClocked
Storage Samsung 950 Pro 256GB m.2 SSD + 480GB Sandisk storage SSD
Display(s) Three Asus 24" VW246H LCD's
Case Silverstone TJ07
Audio Device(s) Onboard
Power Supply Corsair AX1200
Keyboard Corsair K95
Software Windows 10 x64 Pro
Er, you mean "pump"?
 
Joined
Nov 27, 2007
Messages
28,754 (4.82/day)
Location
Miami, Florida
Processor AMD Ryzen 7 7800X3D
Motherboard ASUS ROG Crosshair X670E Hero
Cooling EK FLT 240 DDC, x2 Black Ice Nemesis 360GTX, x1 EK-Quantum Surface P240, Phanteks D30-120 fans x9
Memory G.SKILL Trident Z5 Neo RGB Series (AMD Expo) DDR5 RAM 32GB (2x16GB) 6000MT/s CL30
Video Card(s) ZOTAC Gaming GeForce RTX 4090 AMP Extreme AIRO
Storage Samsung Pro 980 2TB NVMe (OS and Games) // WD Black 10TB HDD (Storage)
Display(s) Samsung 49" Ultrawide Gaming Monitor
Case Phanteks NV7
Power Supply ASUS Rog Thor 1200 Certified 1200W
Software Windows 11 64 Bit Home Edition
Joined
Jul 19, 2006
Messages
43,585 (6.74/day)
Processor AMD Ryzen 7 7800X3D
Motherboard ASUS TUF x670e
Cooling EK AIO 360. Phantek T30 fans.
Memory 32GB G.Skill 6000Mhz
Video Card(s) Asus RTX 4090
Storage WD m.2
Display(s) LG C2 Evo OLED 42"
Case Lian Li PC 011 Dynamic Evo
Audio Device(s) Topping E70 DAC, SMSL SP200 Headphone Amp.
Power Supply FSP Hydro Ti PRO 1000W
Mouse Razer Basilisk V3 Pro
Keyboard Tester84
Software Windows 11
Top