• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

How to enable additional shaders on Radeon HD 6950

Status
Not open for further replies.

obsoletepower

New Member
Joined
Dec 27, 2010
Messages
23 (0.00/day)
Location
Canada
Processor Intel Core 2 Quad Q9550 @ 2.83 GHz (one day I will OC)
Motherboard GIGABYTE EP45-UD3P rev. 1.6
Cooling ZALMAN CNPS7500-ALCU Air Cooler
Memory 2x4GB OCZ PC2-6400 + 2x4GB Corsair PC2-6400 (same timings)
Video Card(s) Sapphire Radeon HD6950 2GB
Storage 1TB WD Caviar Blue 7200 RPM
Display(s) 23" Dell SP2309W LCD + Soundbar
Case Antec Performance P180
Audio Device(s) Build-in HD sound
Power Supply Antec EarthWatts 650W
Software Windows 7 Professional 64-bit
Okay so I installed the 10.12a hotfix from AMD and the crashing seems to be less now. However, I still cannot play games like CoD Black Ops and BF BC2 due to extreme artifacting.

*edit* I am using the Sapphire Tweak Utility and I was able to reduce the clocks to their 6950 stock values. Still the same.
 
Last edited:
M

Mastroz

Guest
Okay so I installed the 10.12a hotfix from AMD and the crashing seems to be less now. However, I still cannot play games like CoD Black Ops and BF BC2 due to extreme artifacting.

I have a question. how do I move the memory clock slider to less than 1375? It will not go any lower in ATI Overdrive. Should I be using another app for this?

U have the power slider up to 20% and fan speed up??
 

obsoletepower

New Member
Joined
Dec 27, 2010
Messages
23 (0.00/day)
Location
Canada
Processor Intel Core 2 Quad Q9550 @ 2.83 GHz (one day I will OC)
Motherboard GIGABYTE EP45-UD3P rev. 1.6
Cooling ZALMAN CNPS7500-ALCU Air Cooler
Memory 2x4GB OCZ PC2-6400 + 2x4GB Corsair PC2-6400 (same timings)
Video Card(s) Sapphire Radeon HD6950 2GB
Storage 1TB WD Caviar Blue 7200 RPM
Display(s) 23" Dell SP2309W LCD + Soundbar
Case Antec Performance P180
Audio Device(s) Build-in HD sound
Power Supply Antec EarthWatts 650W
Software Windows 7 Professional 64-bit

bystander

New Member
Joined
Dec 27, 2010
Messages
52 (0.01/day)
I thought I should add my experience so far with the updated BIOS.

It works great up to 890 GPU clock. After 890 GPU clocks, I start having driver crashes. The good news is the Memory Clock at 1375 has no issues.

3dmark 11 went from 4600 with maxed 6950 clocks, to 5300 with stock 6970 clocks.

I'd also like to mention that when my system did lock up with 900 GPU core, my temps were never above 75C. I assume this may be a voltage issue or something else...anyone care to give me advise if there is something I can do, as temps do not seem to be the issue?
 

obsoletepower

New Member
Joined
Dec 27, 2010
Messages
23 (0.00/day)
Location
Canada
Processor Intel Core 2 Quad Q9550 @ 2.83 GHz (one day I will OC)
Motherboard GIGABYTE EP45-UD3P rev. 1.6
Cooling ZALMAN CNPS7500-ALCU Air Cooler
Memory 2x4GB OCZ PC2-6400 + 2x4GB Corsair PC2-6400 (same timings)
Video Card(s) Sapphire Radeon HD6950 2GB
Storage 1TB WD Caviar Blue 7200 RPM
Display(s) 23" Dell SP2309W LCD + Soundbar
Case Antec Performance P180
Audio Device(s) Build-in HD sound
Power Supply Antec EarthWatts 650W
Software Windows 7 Professional 64-bit

obsoletepower

New Member
Joined
Dec 27, 2010
Messages
23 (0.00/day)
Location
Canada
Processor Intel Core 2 Quad Q9550 @ 2.83 GHz (one day I will OC)
Motherboard GIGABYTE EP45-UD3P rev. 1.6
Cooling ZALMAN CNPS7500-ALCU Air Cooler
Memory 2x4GB OCZ PC2-6400 + 2x4GB Corsair PC2-6400 (same timings)
Video Card(s) Sapphire Radeon HD6950 2GB
Storage 1TB WD Caviar Blue 7200 RPM
Display(s) 23" Dell SP2309W LCD + Soundbar
Case Antec Performance P180
Audio Device(s) Build-in HD sound
Power Supply Antec EarthWatts 650W
Software Windows 7 Professional 64-bit

obsoletepower

New Member
Joined
Dec 27, 2010
Messages
23 (0.00/day)
Location
Canada
Processor Intel Core 2 Quad Q9550 @ 2.83 GHz (one day I will OC)
Motherboard GIGABYTE EP45-UD3P rev. 1.6
Cooling ZALMAN CNPS7500-ALCU Air Cooler
Memory 2x4GB OCZ PC2-6400 + 2x4GB Corsair PC2-6400 (same timings)
Video Card(s) Sapphire Radeon HD6950 2GB
Storage 1TB WD Caviar Blue 7200 RPM
Display(s) 23" Dell SP2309W LCD + Soundbar
Case Antec Performance P180
Audio Device(s) Build-in HD sound
Power Supply Antec EarthWatts 650W
Software Windows 7 Professional 64-bit
Every game I run will cause the display driver to crash.
 

bystander

New Member
Joined
Dec 27, 2010
Messages
52 (0.01/day)
I just tried this and running 3DMark11 and the display driver crashed. 3DMark11 won't run.

The only thing I could do, when having the same issue, was back off the GPU clock until it would run. Luckly for me, that was at 890, but you may have to drop it lower.

Temps were NOT an issue, so I wonder if someone might suggest a better solution.
 

trialsin

New Member
Joined
Dec 28, 2010
Messages
1 (0.00/day)
+1 to Sapphire 6950s successfully flashed. I replaced the BIOS today and set the clocks to 6970 levels. I got a big performance jump and there's no artifacting in games. Thanks for the writeup!
 

obsoletepower

New Member
Joined
Dec 27, 2010
Messages
23 (0.00/day)
Location
Canada
Processor Intel Core 2 Quad Q9550 @ 2.83 GHz (one day I will OC)
Motherboard GIGABYTE EP45-UD3P rev. 1.6
Cooling ZALMAN CNPS7500-ALCU Air Cooler
Memory 2x4GB OCZ PC2-6400 + 2x4GB Corsair PC2-6400 (same timings)
Video Card(s) Sapphire Radeon HD6950 2GB
Storage 1TB WD Caviar Blue 7200 RPM
Display(s) 23" Dell SP2309W LCD + Soundbar
Case Antec Performance P180
Audio Device(s) Build-in HD sound
Power Supply Antec EarthWatts 650W
Software Windows 7 Professional 64-bit
I'd back the 1375 down a tad maybe... How are your temps??

I cannot, ATI Overdrive minimum is 1375. I can't go any lower.

Since I have the fan at 70% they are not bad. Idle is 38 and load.....I don't know since I cannot run any games or even FurMark.
 

obsoletepower

New Member
Joined
Dec 27, 2010
Messages
23 (0.00/day)
Location
Canada
Processor Intel Core 2 Quad Q9550 @ 2.83 GHz (one day I will OC)
Motherboard GIGABYTE EP45-UD3P rev. 1.6
Cooling ZALMAN CNPS7500-ALCU Air Cooler
Memory 2x4GB OCZ PC2-6400 + 2x4GB Corsair PC2-6400 (same timings)
Video Card(s) Sapphire Radeon HD6950 2GB
Storage 1TB WD Caviar Blue 7200 RPM
Display(s) 23" Dell SP2309W LCD + Soundbar
Case Antec Performance P180
Audio Device(s) Build-in HD sound
Power Supply Antec EarthWatts 650W
Software Windows 7 Professional 64-bit
Yeah I'd try what bystander said... What are your temps like??

Idle is around 38C but I cannot test the card under load because it will crash the app.
 

obsoletepower

New Member
Joined
Dec 27, 2010
Messages
23 (0.00/day)
Location
Canada
Processor Intel Core 2 Quad Q9550 @ 2.83 GHz (one day I will OC)
Motherboard GIGABYTE EP45-UD3P rev. 1.6
Cooling ZALMAN CNPS7500-ALCU Air Cooler
Memory 2x4GB OCZ PC2-6400 + 2x4GB Corsair PC2-6400 (same timings)
Video Card(s) Sapphire Radeon HD6950 2GB
Storage 1TB WD Caviar Blue 7200 RPM
Display(s) 23" Dell SP2309W LCD + Soundbar
Case Antec Performance P180
Audio Device(s) Build-in HD sound
Power Supply Antec EarthWatts 650W
Software Windows 7 Professional 64-bit
I lowered the GPU clock to 800 and Mem clock to 1250. Those are stock 6950 settings. It makes no difference. Apps still crash.
 

obsoletepower

New Member
Joined
Dec 27, 2010
Messages
23 (0.00/day)
Location
Canada
Processor Intel Core 2 Quad Q9550 @ 2.83 GHz (one day I will OC)
Motherboard GIGABYTE EP45-UD3P rev. 1.6
Cooling ZALMAN CNPS7500-ALCU Air Cooler
Memory 2x4GB OCZ PC2-6400 + 2x4GB Corsair PC2-6400 (same timings)
Video Card(s) Sapphire Radeon HD6950 2GB
Storage 1TB WD Caviar Blue 7200 RPM
Display(s) 23" Dell SP2309W LCD + Soundbar
Case Antec Performance P180
Audio Device(s) Build-in HD sound
Power Supply Antec EarthWatts 650W
Software Windows 7 Professional 64-bit

bystander

New Member
Joined
Dec 27, 2010
Messages
52 (0.01/day)
If it won't allow you to run at stock 6950 clocks, this leads me to believe that you may have actually run into a card that had a reason to disable some shaders.
 

obsoletepower

New Member
Joined
Dec 27, 2010
Messages
23 (0.00/day)
Location
Canada
Processor Intel Core 2 Quad Q9550 @ 2.83 GHz (one day I will OC)
Motherboard GIGABYTE EP45-UD3P rev. 1.6
Cooling ZALMAN CNPS7500-ALCU Air Cooler
Memory 2x4GB OCZ PC2-6400 + 2x4GB Corsair PC2-6400 (same timings)
Video Card(s) Sapphire Radeon HD6950 2GB
Storage 1TB WD Caviar Blue 7200 RPM
Display(s) 23" Dell SP2309W LCD + Soundbar
Case Antec Performance P180
Audio Device(s) Build-in HD sound
Power Supply Antec EarthWatts 650W
Software Windows 7 Professional 64-bit
If it won't allow you to run at stock 6950 clocks, this leads me to believe that you may have actually run into a card that had a reason to disable some shaders.

Is there no fix for this?
 

obsoletepower

New Member
Joined
Dec 27, 2010
Messages
23 (0.00/day)
Location
Canada
Processor Intel Core 2 Quad Q9550 @ 2.83 GHz (one day I will OC)
Motherboard GIGABYTE EP45-UD3P rev. 1.6
Cooling ZALMAN CNPS7500-ALCU Air Cooler
Memory 2x4GB OCZ PC2-6400 + 2x4GB Corsair PC2-6400 (same timings)
Video Card(s) Sapphire Radeon HD6950 2GB
Storage 1TB WD Caviar Blue 7200 RPM
Display(s) 23" Dell SP2309W LCD + Soundbar
Case Antec Performance P180
Audio Device(s) Build-in HD sound
Power Supply Antec EarthWatts 650W
Software Windows 7 Professional 64-bit
If you are just looking to get the card working again, you can always flash your saved bios back. That should put you back to where you started at least.

Oh yeah I have done that no worries :D
 

Andypro

New Member
Joined
Dec 28, 2010
Messages
4 (0.00/day)
I tried lowering my memory clocks back to 6950 stock (1250MHz). That didn't help my artifacting unfortunately. Keep the suggestions coming. :)
 
Status
Not open for further replies.
Top