• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Enhanced EIST not working properly?

Joined
Feb 10, 2007
Messages
2,582 (0.41/day)
Location
Oulu, Finland
System Name Enslaver :)
Processor Ryzen 7 7800X3D
Motherboard ASUS TUF Gaming B650-Plus
Cooling CPU: Noctua NH-D14 with LED fans, Case: 2 front in - 1 rear out
Memory 2x16GB Kingston Fury Beast RGB 6000MHz
Video Card(s) ASUS TUF RTX 4070Ti OC
Storage Samsung Evo Plus 1TB NVMe , internal WD Red 4TB for storage, WD Book 8TB
Display(s) LG CX OLED 65"
Case Lian Li LANCOOL II Mesh C Performance
Audio Device(s) HDMI audio powering Dolby Digital audio on 5.1 Z960 speaker system
Power Supply Corsair RM850x
Mouse Logitech G700
Keyboard ASUS Strix Tactic Pro
Software Windows 11 Pro x64
Hi!

With the system in my specs I got a wierd "problem". My CPU (C2D Q6600) supports Intels Enhanced EIST mode in which multiplier and voltage is adjusted depending on load in small increments, also my mobo supports Enhanced EIST.

I run WinXP x32 now and have enabled Enhanced EIST in the WinXP power-managment but for some reason when I check the CPU speed with CPU-Z for example I only can see 2 different MHz amounts, 1600MHz idle (multi 6x) and 2400MHz (multi 9x) under load - no small increments whatsoever.

I even used a program called CPUKiller3 to put different CPU loads on the Q6600 but it will not increase steadily but just jump to max speed.

In Bios I tried to put C1E on auto and disabled mode but nothing changes.

The only reason I call this a problem is that the drastic jumps in MHz seem to make my system a little laggy.

Thx for all insights!
 

INSTG8R

Vanguard Beta Tester
Joined
Nov 26, 2004
Messages
7,955 (1.13/day)
Location
Canuck in Norway
System Name Hellbox 5.1(same case new guts)
Processor Ryzen 7 5800X3D
Motherboard MSI X570S MAG Torpedo Max
Cooling TT Kandalf L.C.S.(Water/Air)EK Velocity CPU Block/Noctua EK Quantum DDC Pump/Res
Memory 2x16GB Gskill Trident Neo Z 3600 CL16
Video Card(s) Powercolor Hellhound 7900XTX
Storage 970 Evo Plus 500GB 2xSamsung 850 Evo 500GB RAID 0 1TB WD Blue Corsair MP600 Core 2TB
Display(s) Alienware QD-OLED 34” 3440x1440 144hz 10Bit VESA HDR 400
Case TT Kandalf L.C.S.
Audio Device(s) Soundblaster ZX/Logitech Z906 5.1
Power Supply Seasonic TX~’850 Platinum
Mouse G502 Hero
Keyboard G19s
VR HMD Oculus Quest 2
Software Win 10 Pro x64
That is the multi stepping mine uses as well with EIST enabled in the BIOS anyway. I don't believe there is anything in between.

I have never experience any lag but then mine E6600 is pretty overclocked so it idles at 2400 and loads at 3600.
 
Joined
Feb 10, 2007
Messages
2,582 (0.41/day)
Location
Oulu, Finland
System Name Enslaver :)
Processor Ryzen 7 7800X3D
Motherboard ASUS TUF Gaming B650-Plus
Cooling CPU: Noctua NH-D14 with LED fans, Case: 2 front in - 1 rear out
Memory 2x16GB Kingston Fury Beast RGB 6000MHz
Video Card(s) ASUS TUF RTX 4070Ti OC
Storage Samsung Evo Plus 1TB NVMe , internal WD Red 4TB for storage, WD Book 8TB
Display(s) LG CX OLED 65"
Case Lian Li LANCOOL II Mesh C Performance
Audio Device(s) HDMI audio powering Dolby Digital audio on 5.1 Z960 speaker system
Power Supply Corsair RM850x
Mouse Logitech G700
Keyboard ASUS Strix Tactic Pro
Software Windows 11 Pro x64
This is from SpeedStep Wiki site which states that at lease V3.1 uses many steps so why not Enhanced EIST too:

Versions

V1.1 is used by second generation Pentium III processors. It enables the CPU to switch between two modes: high and low frequency. This is done by modifying the CPU's multiplier. A 1 GHz Pentium III consuming about 20 watts could be reduced to 600 MHz which reduces the power consumption to about 6 watts.
V2.1 (Enhanced SpeedStep) is used in Pentium III-Mobile processors and is similar to the previous version, but in the low frequency mode the CPU also uses a different voltage than the high frequency mode.
V2.2 is adapted for Pentium 4-Mobile processors. With this, a 1.8 GHz Pentium 4-M consuming about 30 watts can lower its frequency to 1.2 GHz, thus reducing power consumption to about 20 watts.
V3.1 (EIST) is used with the first and second generation of Pentium M processors (Banias and Dothan cores, used in Centrino platforms). With this technology, the CPU varies its frequency (and voltage) between about 40% and 100% of its base frequency in increments of 100 MHz (for Banias core) or 133 MHz (for Dothan core). With this technology, Intel also introduces realtime Level 2 cache capacity variation, further improving power savings.
V3.2 (Enhanced EIST) is adapted for multi-core processors with unified Level 2 cache.
 

INSTG8R

Vanguard Beta Tester
Joined
Nov 26, 2004
Messages
7,955 (1.13/day)
Location
Canuck in Norway
System Name Hellbox 5.1(same case new guts)
Processor Ryzen 7 5800X3D
Motherboard MSI X570S MAG Torpedo Max
Cooling TT Kandalf L.C.S.(Water/Air)EK Velocity CPU Block/Noctua EK Quantum DDC Pump/Res
Memory 2x16GB Gskill Trident Neo Z 3600 CL16
Video Card(s) Powercolor Hellhound 7900XTX
Storage 970 Evo Plus 500GB 2xSamsung 850 Evo 500GB RAID 0 1TB WD Blue Corsair MP600 Core 2TB
Display(s) Alienware QD-OLED 34” 3440x1440 144hz 10Bit VESA HDR 400
Case TT Kandalf L.C.S.
Audio Device(s) Soundblaster ZX/Logitech Z906 5.1
Power Supply Seasonic TX~’850 Platinum
Mouse G502 Hero
Keyboard G19s
VR HMD Oculus Quest 2
Software Win 10 Pro x64
Most of that is dealing with mobile CPU's tho minus the last one.

We are both on the same chipset and I have never seen mine use anything but 6x or 9x
I am on Win7 now but it was no different when I was on XP.

Any reason you make any attempt at overclocking? I mean I have Aida running on my G15 so I have my CPU clocks, temps, etc on screen at all times and I see my clocks go up and down all the time(say a load screen between levels in a game for example) and I have never noticed lag.
 

newtekie1

Semi-Retired Folder
Joined
Nov 22, 2005
Messages
28,472 (4.25/day)
Location
Indiana, USA
Processor Intel Core i7 10850K@5.2GHz
Motherboard AsRock Z470 Taichi
Cooling Corsair H115i Pro w/ Noctua NF-A14 Fans
Memory 32GB DDR4-3600
Video Card(s) RTX 2070 Super
Storage 500GB SX8200 Pro + 8TB with 1TB SSD Cache
Display(s) Acer Nitro VG280K 4K 28"
Case Fractal Design Define S
Audio Device(s) Onboard is good enough for me
Power Supply eVGA SuperNOVA 1000w G3
Software Windows 10 Pro x64
On the desktop processors there is nothing in between, just 6 and 9(or whatever your highest multiplier is). The power savings here isn't worth the effort to do in-between steps. In fact, there isn't a drastic power saving even with the huge speed jump, I just turn it off completely.
 

INSTG8R

Vanguard Beta Tester
Joined
Nov 26, 2004
Messages
7,955 (1.13/day)
Location
Canuck in Norway
System Name Hellbox 5.1(same case new guts)
Processor Ryzen 7 5800X3D
Motherboard MSI X570S MAG Torpedo Max
Cooling TT Kandalf L.C.S.(Water/Air)EK Velocity CPU Block/Noctua EK Quantum DDC Pump/Res
Memory 2x16GB Gskill Trident Neo Z 3600 CL16
Video Card(s) Powercolor Hellhound 7900XTX
Storage 970 Evo Plus 500GB 2xSamsung 850 Evo 500GB RAID 0 1TB WD Blue Corsair MP600 Core 2TB
Display(s) Alienware QD-OLED 34” 3440x1440 144hz 10Bit VESA HDR 400
Case TT Kandalf L.C.S.
Audio Device(s) Soundblaster ZX/Logitech Z906 5.1
Power Supply Seasonic TX~’850 Platinum
Mouse G502 Hero
Keyboard G19s
VR HMD Oculus Quest 2
Software Win 10 Pro x64
On the desktop processors there is nothing in between, just 6 and 9(or whatever your highest multiplier is). The power savings here isn't worth the effort to do in-between steps. In fact, there isn't a drastic power saving even with the huge speed jump, I just turn it off completely.

Well my CPU voltages drop so I look at it as every little bit counts. It sits at 1.21v@2400Mhz
Tho overall I do agree. Most people say using EIST with an OC makes it unstable but I have always used it since I built it and have had it OC'd since I built it(was 3.2 but hey its old and on water so I figured I would push it as far as it would go)
 

OneMoar

There is Always Moar
Joined
Apr 9, 2010
Messages
8,740 (1.71/day)
Location
Rochester area
System Name RPC MK2.5
Processor Ryzen 5800x
Motherboard Gigabyte Aorus Pro V2
Cooling Enermax ETX-T50RGB
Memory CL16 BL2K16G36C16U4RL 3600 1:1 micron e-die
Video Card(s) GIGABYTE RTX 3070 Ti GAMING OC
Storage ADATA SX8200PRO NVME 512GB, Intel 545s 500GBSSD, ADATA SU800 SSD, 3TB Spinner
Display(s) LG Ultra Gear 32 1440p 165hz Dell 1440p 75hz
Case Phanteks P300 /w 300A front panel conversion
Audio Device(s) onboard
Power Supply SeaSonic Focus+ Platinum 750W
Mouse Kone burst Pro
Keyboard EVGA Z15
Software Windows 11 +startisallback
you need to adjust you're power plan settings in the windows CP to make it work
power options > change plan settings > advanced > processor power management > set to 1% - 100%
 
Joined
Feb 10, 2007
Messages
2,582 (0.41/day)
Location
Oulu, Finland
System Name Enslaver :)
Processor Ryzen 7 7800X3D
Motherboard ASUS TUF Gaming B650-Plus
Cooling CPU: Noctua NH-D14 with LED fans, Case: 2 front in - 1 rear out
Memory 2x16GB Kingston Fury Beast RGB 6000MHz
Video Card(s) ASUS TUF RTX 4070Ti OC
Storage Samsung Evo Plus 1TB NVMe , internal WD Red 4TB for storage, WD Book 8TB
Display(s) LG CX OLED 65"
Case Lian Li LANCOOL II Mesh C Performance
Audio Device(s) HDMI audio powering Dolby Digital audio on 5.1 Z960 speaker system
Power Supply Corsair RM850x
Mouse Logitech G700
Keyboard ASUS Strix Tactic Pro
Software Windows 11 Pro x64
you need to adjust you're power plan settings in the windows CP to make it work
power options > change plan settings > advanced > processor power management > set to 1% - 100%

This might work in Win7 but I don´t have those options in XP, but thanks for the tip - next time I install 7 I have a look at it.
 

OneMoar

There is Always Moar
Joined
Apr 9, 2010
Messages
8,740 (1.71/day)
Location
Rochester area
System Name RPC MK2.5
Processor Ryzen 5800x
Motherboard Gigabyte Aorus Pro V2
Cooling Enermax ETX-T50RGB
Memory CL16 BL2K16G36C16U4RL 3600 1:1 micron e-die
Video Card(s) GIGABYTE RTX 3070 Ti GAMING OC
Storage ADATA SX8200PRO NVME 512GB, Intel 545s 500GBSSD, ADATA SU800 SSD, 3TB Spinner
Display(s) LG Ultra Gear 32 1440p 165hz Dell 1440p 75hz
Case Phanteks P300 /w 300A front panel conversion
Audio Device(s) onboard
Power Supply SeaSonic Focus+ Platinum 750W
Mouse Kone burst Pro
Keyboard EVGA Z15
Software Windows 11 +startisallback
This might work in Win7 but I don´t have those options in XP, but thanks for the tip - next time I install 7 I have a look at it.

xp has a similar option
 
Joined
Feb 10, 2007
Messages
2,582 (0.41/day)
Location
Oulu, Finland
System Name Enslaver :)
Processor Ryzen 7 7800X3D
Motherboard ASUS TUF Gaming B650-Plus
Cooling CPU: Noctua NH-D14 with LED fans, Case: 2 front in - 1 rear out
Memory 2x16GB Kingston Fury Beast RGB 6000MHz
Video Card(s) ASUS TUF RTX 4070Ti OC
Storage Samsung Evo Plus 1TB NVMe , internal WD Red 4TB for storage, WD Book 8TB
Display(s) LG CX OLED 65"
Case Lian Li LANCOOL II Mesh C Performance
Audio Device(s) HDMI audio powering Dolby Digital audio on 5.1 Z960 speaker system
Power Supply Corsair RM850x
Mouse Logitech G700
Keyboard ASUS Strix Tactic Pro
Software Windows 11 Pro x64
xp has a similar option

Intalled Win7 on another HDD and it has those features but whatever I set for minimum processor state or maximum processor state - it dont affect EIST at all in my case :confused:
 

OneMoar

There is Always Moar
Joined
Apr 9, 2010
Messages
8,740 (1.71/day)
Location
Rochester area
System Name RPC MK2.5
Processor Ryzen 5800x
Motherboard Gigabyte Aorus Pro V2
Cooling Enermax ETX-T50RGB
Memory CL16 BL2K16G36C16U4RL 3600 1:1 micron e-die
Video Card(s) GIGABYTE RTX 3070 Ti GAMING OC
Storage ADATA SX8200PRO NVME 512GB, Intel 545s 500GBSSD, ADATA SU800 SSD, 3TB Spinner
Display(s) LG Ultra Gear 32 1440p 165hz Dell 1440p 75hz
Case Phanteks P300 /w 300A front panel conversion
Audio Device(s) onboard
Power Supply SeaSonic Focus+ Platinum 750W
Mouse Kone burst Pro
Keyboard EVGA Z15
Software Windows 11 +startisallback
is it enabled in the bios
 

cdawall

where the hell are my stars
Joined
Jul 23, 2006
Messages
27,680 (4.29/day)
Location
Houston
System Name All the cores
Processor 2990WX
Motherboard Asrock X399M
Cooling CPU-XSPC RayStorm Neo, 2x240mm+360mm, D5PWM+140mL, GPU-2x360mm, 2xbyski, D4+D5+100mL
Memory 4x16GB G.Skill 3600
Video Card(s) (2) EVGA SC BLACK 1080Ti's
Storage 2x Samsung SM951 512GB, Samsung PM961 512GB
Display(s) Dell UP2414Q 3840X2160@60hz
Case Caselabs Mercury S5+pedestal
Audio Device(s) Fischer HA-02->Fischer FA-002W High edition/FA-003/Jubilate/FA-011 depending on my mood
Power Supply Seasonic Prime 1200w
Mouse Thermaltake Theron, Steam controller
Keyboard Keychron K8
Software W10P
the only options in EIST back then was one high and one low setting sounds like its working perfectly for you
 
Joined
Feb 10, 2007
Messages
2,582 (0.41/day)
Location
Oulu, Finland
System Name Enslaver :)
Processor Ryzen 7 7800X3D
Motherboard ASUS TUF Gaming B650-Plus
Cooling CPU: Noctua NH-D14 with LED fans, Case: 2 front in - 1 rear out
Memory 2x16GB Kingston Fury Beast RGB 6000MHz
Video Card(s) ASUS TUF RTX 4070Ti OC
Storage Samsung Evo Plus 1TB NVMe , internal WD Red 4TB for storage, WD Book 8TB
Display(s) LG CX OLED 65"
Case Lian Li LANCOOL II Mesh C Performance
Audio Device(s) HDMI audio powering Dolby Digital audio on 5.1 Z960 speaker system
Power Supply Corsair RM850x
Mouse Logitech G700
Keyboard ASUS Strix Tactic Pro
Software Windows 11 Pro x64
Maybe I just let this mystery rest
 

INSTG8R

Vanguard Beta Tester
Joined
Nov 26, 2004
Messages
7,955 (1.13/day)
Location
Canuck in Norway
System Name Hellbox 5.1(same case new guts)
Processor Ryzen 7 5800X3D
Motherboard MSI X570S MAG Torpedo Max
Cooling TT Kandalf L.C.S.(Water/Air)EK Velocity CPU Block/Noctua EK Quantum DDC Pump/Res
Memory 2x16GB Gskill Trident Neo Z 3600 CL16
Video Card(s) Powercolor Hellhound 7900XTX
Storage 970 Evo Plus 500GB 2xSamsung 850 Evo 500GB RAID 0 1TB WD Blue Corsair MP600 Core 2TB
Display(s) Alienware QD-OLED 34” 3440x1440 144hz 10Bit VESA HDR 400
Case TT Kandalf L.C.S.
Audio Device(s) Soundblaster ZX/Logitech Z906 5.1
Power Supply Seasonic TX~’850 Platinum
Mouse G502 Hero
Keyboard G19s
VR HMD Oculus Quest 2
Software Win 10 Pro x64
the only options in EIST back then was one high and one low setting sounds like its working perfectly for you

This.

I assure you it will only use those 2 Multipliers.
 

INSTG8R

Vanguard Beta Tester
Joined
Nov 26, 2004
Messages
7,955 (1.13/day)
Location
Canuck in Norway
System Name Hellbox 5.1(same case new guts)
Processor Ryzen 7 5800X3D
Motherboard MSI X570S MAG Torpedo Max
Cooling TT Kandalf L.C.S.(Water/Air)EK Velocity CPU Block/Noctua EK Quantum DDC Pump/Res
Memory 2x16GB Gskill Trident Neo Z 3600 CL16
Video Card(s) Powercolor Hellhound 7900XTX
Storage 970 Evo Plus 500GB 2xSamsung 850 Evo 500GB RAID 0 1TB WD Blue Corsair MP600 Core 2TB
Display(s) Alienware QD-OLED 34” 3440x1440 144hz 10Bit VESA HDR 400
Case TT Kandalf L.C.S.
Audio Device(s) Soundblaster ZX/Logitech Z906 5.1
Power Supply Seasonic TX~’850 Platinum
Mouse G502 Hero
Keyboard G19s
VR HMD Oculus Quest 2
Software Win 10 Pro x64
Just because CPU-Z doesn't report something doesn't mean it didn't happen. :)

I am using Aida64 and watching this in real time on my G15.

There are only 2 speeds either 6x or 9x there is no in between ;)

He is on the exact chipset I'm on so I'm not mistaken.

Even if I put it into "Power Saver" Mode it will still only drop the multi to 6x.
 
Joined
Feb 10, 2007
Messages
2,582 (0.41/day)
Location
Oulu, Finland
System Name Enslaver :)
Processor Ryzen 7 7800X3D
Motherboard ASUS TUF Gaming B650-Plus
Cooling CPU: Noctua NH-D14 with LED fans, Case: 2 front in - 1 rear out
Memory 2x16GB Kingston Fury Beast RGB 6000MHz
Video Card(s) ASUS TUF RTX 4070Ti OC
Storage Samsung Evo Plus 1TB NVMe , internal WD Red 4TB for storage, WD Book 8TB
Display(s) LG CX OLED 65"
Case Lian Li LANCOOL II Mesh C Performance
Audio Device(s) HDMI audio powering Dolby Digital audio on 5.1 Z960 speaker system
Power Supply Corsair RM850x
Mouse Logitech G700
Keyboard ASUS Strix Tactic Pro
Software Windows 11 Pro x64
Maybe having 2 steps only can benefit the e-bill so I don´t complain anymore :) Thx guys for all info!
 

unclewebb

ThrottleStop & RealTemp Author
Joined
Jun 1, 2008
Messages
7,265 (1.26/day)
Enhanced Intel® SpeedStep® Technology

Multiple frequency and voltage points for optimal performance and power efficiency. These operating points are known as P-states.

Because there is low transition latency between P-states, a significant number of transitions per second are possible.
--------------------------------------------------------------------------------

When software samples a CPU once per second or once every 5 seconds, it's not capable of accurately reporting the intermediate multipliers during a SpeedStep transition. That doesn't prove that the intermediate multipliers are not being used.

Here's the latest version of AIDA64 telling me that my T8100 mobile CPU is using a 23 multiplier and is running at 4587.2 MHz.



Very impressive but it's not true. It's not a good idea to believe everything that software tells you.
 
Joined
Feb 10, 2007
Messages
2,582 (0.41/day)
Location
Oulu, Finland
System Name Enslaver :)
Processor Ryzen 7 7800X3D
Motherboard ASUS TUF Gaming B650-Plus
Cooling CPU: Noctua NH-D14 with LED fans, Case: 2 front in - 1 rear out
Memory 2x16GB Kingston Fury Beast RGB 6000MHz
Video Card(s) ASUS TUF RTX 4070Ti OC
Storage Samsung Evo Plus 1TB NVMe , internal WD Red 4TB for storage, WD Book 8TB
Display(s) LG CX OLED 65"
Case Lian Li LANCOOL II Mesh C Performance
Audio Device(s) HDMI audio powering Dolby Digital audio on 5.1 Z960 speaker system
Power Supply Corsair RM850x
Mouse Logitech G700
Keyboard ASUS Strix Tactic Pro
Software Windows 11 Pro x64
Enhanced Intel® SpeedStep® Technology

Multiple frequency and voltage points for optimal performance and power efficiency. These operating points are known as P-states.

Because there is low transition latency between P-states, a significant number of transitions per second are possible.
--------------------------------------------------------------------------------

When software samples a CPU once per second or once every 5 seconds, it's not capable of accurately reporting the intermediate multipliers during a SpeedStep transition. That doesn't prove that the intermediate multipliers are not being used.

Here's the latest version of AIDA64 telling me that my T8100 mobile CPU is using a 23 multiplier and is running at 4587.2 MHz.

http://img831.imageshack.us/img831/9600/aida64t8100.png

Very impressive but it's not true. It's not a good idea to believe everything that software tells you.

In short: SpeedStep in my case is working in many steps but CPU-Z for example is to slow to show them all?
 

OneMoar

There is Always Moar
Joined
Apr 9, 2010
Messages
8,740 (1.71/day)
Location
Rochester area
System Name RPC MK2.5
Processor Ryzen 5800x
Motherboard Gigabyte Aorus Pro V2
Cooling Enermax ETX-T50RGB
Memory CL16 BL2K16G36C16U4RL 3600 1:1 micron e-die
Video Card(s) GIGABYTE RTX 3070 Ti GAMING OC
Storage ADATA SX8200PRO NVME 512GB, Intel 545s 500GBSSD, ADATA SU800 SSD, 3TB Spinner
Display(s) LG Ultra Gear 32 1440p 165hz Dell 1440p 75hz
Case Phanteks P300 /w 300A front panel conversion
Audio Device(s) onboard
Power Supply SeaSonic Focus+ Platinum 750W
Mouse Kone burst Pro
Keyboard EVGA Z15
Software Windows 11 +startisallback
cpuz calculates in real time

just forget about it man EIST never worked correct on the early core chips
 

INSTG8R

Vanguard Beta Tester
Joined
Nov 26, 2004
Messages
7,955 (1.13/day)
Location
Canuck in Norway
System Name Hellbox 5.1(same case new guts)
Processor Ryzen 7 5800X3D
Motherboard MSI X570S MAG Torpedo Max
Cooling TT Kandalf L.C.S.(Water/Air)EK Velocity CPU Block/Noctua EK Quantum DDC Pump/Res
Memory 2x16GB Gskill Trident Neo Z 3600 CL16
Video Card(s) Powercolor Hellhound 7900XTX
Storage 970 Evo Plus 500GB 2xSamsung 850 Evo 500GB RAID 0 1TB WD Blue Corsair MP600 Core 2TB
Display(s) Alienware QD-OLED 34” 3440x1440 144hz 10Bit VESA HDR 400
Case TT Kandalf L.C.S.
Audio Device(s) Soundblaster ZX/Logitech Z906 5.1
Power Supply Seasonic TX~’850 Platinum
Mouse G502 Hero
Keyboard G19s
VR HMD Oculus Quest 2
Software Win 10 Pro x64
Again unclewebb that is Mobile CPU's. Different animal. My Turion 64 X2 can go all over the place too. doesn't apply to C2's.

Like OneMoar said it never really worked well. I have a mate that built a similar rig to mine only using a Gigabyte board and he could never get his to work properly.
Mine works and so does Laurijan's as advertised.
 
Joined
Feb 19, 2009
Messages
1,821 (0.33/day)
Location
UK Warwickshire
System Name PC-Chips
Processor Ryzen 5 5600x
Motherboard Asus ROG Strix B550-F Gaming
Cooling ID Cooling SE_225-XT Black with noctua fans
Memory Patriot Viper 32gig dual channel 3600mhz
Video Card(s) ZOTAC NVIDIA GeForce RTX 3060 12GB TWIN EDGE OC
Storage 2X Samsung 860 EVO SSD's 500gig / 2TB crucial P3-NVME / WD-BLUE SN550 1TB M.2 / SP A55 512gig
Display(s) Panasonic 40-inch 4k TV
Case NZXT H510
Audio Device(s) Realtek S1220A - Yamaha A-S501 AMP - 4 x Wharfedale diamond 9.1 speakers - Wharfedale SW150 sub
Power Supply EVGA SuperNOVA G6 750W 80+ Gold
Mouse Some cheap wireless thing
Keyboard Razer Cynosa lite
VR HMD Oculus Quest 2 128gig version
Software Windows 11 pro 64bit
My Q6600 only does 2 steps if i set the options in bios.
 

unclewebb

ThrottleStop & RealTemp Author
Joined
Jun 1, 2008
Messages
7,265 (1.26/day)
In the RealTemp download is a program called i7 Turbo GT. It was originally designed for the Core i7 CPUs but it is also very accurate on the older Core 2 based CPUs

It uses the high performance monitoring timers that Intel builds into their CPUs so rapid multiplier transitions can be accurately measured. i7 Turbo GT calculates the average multiplier during each 1 second sampling period. It is accurate enough that it can show you problems like this:



A Core 2 Quad consists internally of two separate Core 2 Duo CPUs. Not many people know this but you can run these two dual cores independently at completely different speeds. In the above example, one of the dual core CPUs within this quad is operating with the 7 multiplier while the other dual core is using an 11 multiplier. AIDA64 isn't designed to be able to show you stuff like this. CPU-Z can show you this if you have two instances of CPU-Z open and each version is set to read one of the dual cores.

i7 Turbo GT can also show you when your CPU is doing rapid C State transitions. CPU-Z has chosen to ignore the rapid multiplier transitions that happen in these CPUs for consistent validation purposes. Sometimes what's really going on inside a CPU is "too much information" and some software has decided to keep it simple.
 
Top