- Joined
- Nov 3, 2006
- Messages
- 340 (0.05/day)
- Location
- Jonesbor, AR United States
Processor | Q6600 G0 SLACR @ 3.76 GHz |
---|---|
Motherboard | ASUS Maximus Formula X38 |
Cooling | D-Tek Fuzion Nozzled |
Memory | 2x2 GB Geil Esoteria @ DDR2-1129 |
Video Card(s) | 2 Diamond HD 2900XT 1GB Crossfire 940/075 MCW60 |
Storage | 2 Western Digital 500 Gb Maxtor 250 Gb |
Display(s) | Westinghouse LVM-37W3 1080P 37" HDTV |
Case | Thermaltake Armor Silver w/ 250mm side fan |
Audio Device(s) | Auzentech Prelude |
Power Supply | Silverstone DA850 850W |
Okay I've posted in the other thread, but I haven't gotten any results from a TeamGroup tech yet, so I thought I'd give my own thread a shot. I've tried MANY different timings to allow me to reach the spec clock of 250 with no success. Here are my best clock/timing settings so far, but I've tried the higher limits suggested in the other thread concerning this memory and the DFI motherboard. My system specs are as follows:
Abit AT8 32X motherboard
Team Xtreem Cronus 2x1Gb 3-3-3-8
AMD Athlon 64 X2 3800+ @ 2.65 GHz, VCore=1.400
OCZ GameXtream 700W PSU
HIS X1950 Pro 256 Mb
Evercool memory fans
http://www.evercool.com.tw/products/neon_crab.htm
I haven't gotten much reception with the tech support though email, and I really would appreciate the help, as I've had this memory for 2 months and still can't get it to 250 MHz without failing Orthos in 4s. If I give the memory 2.9V then I last for 30 or 40s, but this shouldn't be necessary for that spec clock.
Here are my benchmarks using SiSoftware's Sandra 2007, the same software that they used on the TeamGroup test run on the Teamgroup website. Here is my Rightmark memory analyzer screens of my CPU and memory settings. These are stable in gaming and Orthos.
Abit AT8 32X motherboard
Team Xtreem Cronus 2x1Gb 3-3-3-8
AMD Athlon 64 X2 3800+ @ 2.65 GHz, VCore=1.400
OCZ GameXtream 700W PSU
HIS X1950 Pro 256 Mb
Evercool memory fans
http://www.evercool.com.tw/products/neon_crab.htm
I haven't gotten much reception with the tech support though email, and I really would appreciate the help, as I've had this memory for 2 months and still can't get it to 250 MHz without failing Orthos in 4s. If I give the memory 2.9V then I last for 30 or 40s, but this shouldn't be necessary for that spec clock.
Here are my benchmarks using SiSoftware's Sandra 2007, the same software that they used on the TeamGroup test run on the Teamgroup website. Here is my Rightmark memory analyzer screens of my CPU and memory settings. These are stable in gaming and Orthos.