DeAtHWiSh
New Member
- Joined
- Dec 24, 2007
- Messages
- 197 (0.03/day)
- Location
- Miami, FL
System Name | Desktop / Laptop |
---|---|
Processor | AMD Thuban 1090T@3.6GHz HT@2.6GHz / Intel i7 2630QM @ 2.0GHz |
Motherboard | Asus CH V 990FX / Intel HM67 |
Cooling | Corsair H100 CPU Load @ 48C (Fans on Low 24/7) / Stock |
Memory | G.SKILL Sniper Series (2 x 4GB) DDR3 1600 9-9-9-24-2T / Corsiar Vengence DD3 1600 (4GB x 2) |
Video Card(s) | ASUS 580 GTX DCII / NVidia 555M 1.5GB |
Storage | OCZ Vertex III 120GB (OS) - Seagate Barracuda 320GB-7200RPM (X2 in RAID 0) / PNY 128GB SSD |
Display(s) | HP 2711x 1080P 27'' LED ON DVI / 14'' LED 900p |
Case | Cooler Master HAF X 942 / Alienware |
Audio Device(s) | Realtek ALC892 8-Channel HD Audio / Realtek HD Audio |
Power Supply | Cooler Master Silent Pro 850W / Stock |
Software | Windows 7 Ultimate 64 Bit / Windows 7 Home Premium |
Benchmark Scores | Real Men Crunch 4 TPU! |
It's been a pretty good time since I ran RAID drives and recently I have not been having any luck.
I have the RAID function on in Bios and I have already set the drives to a Raid Array in 0.
Now my problem comes when I am trying to install Windows 7 X64.
It obviously will ask me for the drivers but when it does and I search for it, it only see's x86 drivers and nothing on the X64 bit folder on my flash drive.
I checked the flash drive and I know its in there, and I downloaded it directly from the AsRock Driver Downloads folder for my board.
I am wondering if maybe I'm doing something wrong, or if maybe there are other drivers i should be using.
Setting in bios:
SATA Controller - enabled
SATA Mode - RAID Mode
Onboard Raid 3TB+ Unlocker - Legacy ROM
SATA IDE Combined Mode- Enabled
Update:
Ok I got the raid going, I installed the X86 drivers because it doesn't say I have any compatible drivers and then the OS begins to load.
Once it's done, it reboots and normally asks for your username and the basic setups, but in my case I get a BSOD, and it's so face it's impossible to see what it might be dumping.
I have the RAID function on in Bios and I have already set the drives to a Raid Array in 0.
Now my problem comes when I am trying to install Windows 7 X64.
It obviously will ask me for the drivers but when it does and I search for it, it only see's x86 drivers and nothing on the X64 bit folder on my flash drive.
I checked the flash drive and I know its in there, and I downloaded it directly from the AsRock Driver Downloads folder for my board.
I am wondering if maybe I'm doing something wrong, or if maybe there are other drivers i should be using.
Setting in bios:
SATA Controller - enabled
SATA Mode - RAID Mode
Onboard Raid 3TB+ Unlocker - Legacy ROM
SATA IDE Combined Mode- Enabled
Update:
Ok I got the raid going, I installed the X86 drivers because it doesn't say I have any compatible drivers and then the OS begins to load.
Once it's done, it reboots and normally asks for your username and the basic setups, but in my case I get a BSOD, and it's so face it's impossible to see what it might be dumping.
Last edited: