• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

When Watching Streaming Videos Online

happy

New Member
Joined
Jun 22, 2011
Messages
638 (0.14/day)
System Name HAPPY
Processor i7-2600
Motherboard ASRock P67 EXTREME4 GEN3
Cooling CORSAIR CAFA50 (CPU)
Memory 4GB 1333mhz
Video Card(s) GIGABYTE GV-N460OC-1GI
Storage HITACHI 160GB 7200RPM HDT721016SLA380 & 5 IDE 250GB WD HDD
Power Supply Corsair 650 TX
Software Windows 7 Ultimate x64
I'd go with m4gicfour but I think Solaris17 is also on the same page as for getting the x1 card right? But If I do get the x1 x8 or x16 card over the AGP, I could actually use it on a next rig; hence, the more room for salvaging some parts (well the GPU, SATA cables and I think pretty much that's it). If I stuck with the GX270 I would have to buy additional memory and the AGP card which would easily be 80 - 90 dollars. Memory for the GX270 is about 40 - 50 dollars which is 20 - 30 dollars more expensive than the memory I bought for the Dimensions E310.
 

Solaris17

Super Dainty Moderator
Staff member
Joined
Aug 16, 2005
Messages
25,774 (3.79/day)
Location
Alabama
System Name Rocinante
Processor I9 14900KS
Motherboard EVGA z690 Dark KINGPIN (modded BIOS)
Cooling EK-AIO Elite 360 D-RGB
Memory 64GB Gskill Trident Z5 DDR5 6000 @6400
Video Card(s) MSI SUPRIM Liquid X 4090
Storage 1x 500GB 980 Pro | 1x 1TB 980 Pro | 1x 8TB Corsair MP400
Display(s) Odyssey OLED G9 G95SC
Case Lian Li o11 Evo Dynamic White
Audio Device(s) Moondrop S8's on Schiit Hel 2e
Power Supply Bequiet! Power Pro 12 1500w
Mouse Lamzu Atlantis mini (White)
Keyboard Monsgeek M3 Lavender, Akko Crystal Blues
VR HMD Quest 3
Software Windows 11
Benchmark Scores I dont have time for that.
Did you just say high-end PCIe x1 card? Do they make those? :laugh:

sure a few of those are going to generate way more heat then the others.
 
Joined
May 21, 2008
Messages
966 (0.17/day)
Processor Ryzen 7 5800X3D
Motherboard MSI MAG X570S Tomahawk Max WiFi
Cooling EK Supremacy EVO Elite + EK D5 + EK 420 Rad, TT Toughfan 140x3, TT Toughfan 120x2, Arctic slim 120
Memory 32GB GSkill DDR4-3600 (F4-3600C16-8GVKC)
Video Card(s) Gigabyte Radeon RX 7900XTX Gaming OC
Storage WDBlack SN850X 4TB, Samsung 950Pro 512GB, Samsung 850EVO 500GB, 6TB WDRed, 36TB NAS, 8TB Lancache
Display(s) Benq XL2730Z (1440P 144Hz, TN, Freesync) & 2x ASUS VE248
Case Corsair Obsidian 750D
Audio Device(s) Topping D50S + THX AAA 789, TH-X00 w/ V-Moda Boompro; 7Hz Timeless
Power Supply Corsair HX1000i
Mouse Sharkoon Fireglider optical
Keyboard Corsair K95 RGB
Software Windows 11 Pro
I'd go with m4gicfour but I think Solaris17 is also on the same page as for getting the x1 card right? But If I do get the x1 x8 or x16 card over the AGP, I could actually use it on a next rig; hence, the more room for salvaging some parts (well the GPU, SATA cables and I think pretty much that's it). If I stuck with the GX270 I would have to buy additional memory and the AGP card which would easily be 80 - 90 dollars. Memory for the GX270 is about 40 - 50 dollars which is 20 - 30 dollars more expensive than the memory I bought for the Dimensions E310.

Yeah the hardware for the GX is old enough that to buy it is starting to get MORE expensive because it's rare. On the other hand, AGP graphics cards aren't rare and you could probably find a used 3850AGP for less than $50. PCIe x1 cards are more expensive than x16 cards with the same chip, just because few x1 cards are made.

If you want to do any upgrading on either machine, check the Buy/Sell section of these forums (although you're unlikely to find any x1 cards, the RAM, AGP card, and maybe even a CPU wouldn't be too hard to find). You'll definitely want a bigger PSU (400W or so) if you put a 3850 in that GX.
sure a few of those are going to generate way more heat then the others.

I'm just being a smart-ass, don't mind me.
 

happy

New Member
Joined
Jun 22, 2011
Messages
638 (0.14/day)
System Name HAPPY
Processor i7-2600
Motherboard ASRock P67 EXTREME4 GEN3
Cooling CORSAIR CAFA50 (CPU)
Memory 4GB 1333mhz
Video Card(s) GIGABYTE GV-N460OC-1GI
Storage HITACHI 160GB 7200RPM HDT721016SLA380 & 5 IDE 250GB WD HDD
Power Supply Corsair 650 TX
Software Windows 7 Ultimate x64
Man. I thought 230w from the E310 would be able to handle the ZOTAC ZT-50608-10L GeForce GT 520 without the need to buy a new extra PSU. Does that mean the GX270 with 250w PSU will be capable of handling the Diamond 7000?
The Video Cards don't specify the wattage requirement.
 
Joined
Jan 17, 2010
Messages
12,280 (2.37/day)
Location
Oregon
System Name Juliette // HTPC
Processor Intel i7 9700K // AMD Ryzen 5 5600G
Motherboard ASUS Prime Z390X-A // ASRock B550 ITX-AC
Cooling Noctua NH-U12 Black // Stock
Memory Corsair DDR4 3600 32gb //G.SKILL Trident Z Royal Series 16GB (2 x 8GB) 3600
Video Card(s) ASUS RTX4070 OC// GTX 1650
Storage Samsung 970 EVO NVMe 1Tb, Intel 665p Series M.2 2280 1TB // Samsung 1Tb SSD
Display(s) ASUS VP348QGL 34" Quad HD 3440 x 1440 // 55" LG 4K SK8000 Series
Case Seasonic SYNCRO Q7// Silverstone Granada GD05
Audio Device(s) Focusrite Scarlett 4i4 // HDMI to Samsung HW-R650 sound bar
Power Supply Seasonic SYNCRO 750 W // CORSAIR Vengeance 650M
Mouse Cooler Master MM710 53G
Keyboard Logitech 920-009300 G512 SE
Software Windows 10 Pro // Windows 10 Pro
Joined
May 21, 2008
Messages
966 (0.17/day)
Processor Ryzen 7 5800X3D
Motherboard MSI MAG X570S Tomahawk Max WiFi
Cooling EK Supremacy EVO Elite + EK D5 + EK 420 Rad, TT Toughfan 140x3, TT Toughfan 120x2, Arctic slim 120
Memory 32GB GSkill DDR4-3600 (F4-3600C16-8GVKC)
Video Card(s) Gigabyte Radeon RX 7900XTX Gaming OC
Storage WDBlack SN850X 4TB, Samsung 950Pro 512GB, Samsung 850EVO 500GB, 6TB WDRed, 36TB NAS, 8TB Lancache
Display(s) Benq XL2730Z (1440P 144Hz, TN, Freesync) & 2x ASUS VE248
Case Corsair Obsidian 750D
Audio Device(s) Topping D50S + THX AAA 789, TH-X00 w/ V-Moda Boompro; 7Hz Timeless
Power Supply Corsair HX1000i
Mouse Sharkoon Fireglider optical
Keyboard Corsair K95 RGB
Software Windows 11 Pro
Man. I thought 230w from the E310 would be able to handle the ZOTAC ZT-50608-10L GeForce GT 520 without the need to buy a new extra PSU. Does that mean the GX270 with 250w PSU will be capable of handling the Diamond 7000?
The Video Cards don't specify the wattage requirement.

The GT520 or Radeon 5450 might be OK. (might) The PCIe x1 cards are newer, and not designed as high-performance gaming cards so they draw less power.

A 3850 AGP is a much power hungrier card (and I was talking about the GX computer with that one

Note - I'm not sure if you are, but I think you might be getting confused: PCIe x1 slots can be cut to be used with PCIe cards of any lane width (x1, x4, x8 ,x16) but not PCI cards or AGP cards.

The opposite is also true. AGP or PCI slots won't work with anything but the card designed for them. PCIe slots (x16) will work with any smaller (x1, x4, x8) card without any mod.
 

happy

New Member
Joined
Jun 22, 2011
Messages
638 (0.14/day)
System Name HAPPY
Processor i7-2600
Motherboard ASRock P67 EXTREME4 GEN3
Cooling CORSAIR CAFA50 (CPU)
Memory 4GB 1333mhz
Video Card(s) GIGABYTE GV-N460OC-1GI
Storage HITACHI 160GB 7200RPM HDT721016SLA380 & 5 IDE 250GB WD HDD
Power Supply Corsair 650 TX
Software Windows 7 Ultimate x64
Note - I'm not sure if you are, but I think you might be getting confused: PCIe x1 slots can be cut to be used with PCIe cards of any lane width (x1, x4, x8 ,x16) but not PCI cards or AGP cards.

Yeah. took me a while to understand but I figured it out, but was just thinking whether or not I would be able to carefully cut that back of the x1 slot on the E310 board.

The x16 cards could be 2.0 or 2.1 versions right?
 
Joined
May 21, 2008
Messages
966 (0.17/day)
Processor Ryzen 7 5800X3D
Motherboard MSI MAG X570S Tomahawk Max WiFi
Cooling EK Supremacy EVO Elite + EK D5 + EK 420 Rad, TT Toughfan 140x3, TT Toughfan 120x2, Arctic slim 120
Memory 32GB GSkill DDR4-3600 (F4-3600C16-8GVKC)
Video Card(s) Gigabyte Radeon RX 7900XTX Gaming OC
Storage WDBlack SN850X 4TB, Samsung 950Pro 512GB, Samsung 850EVO 500GB, 6TB WDRed, 36TB NAS, 8TB Lancache
Display(s) Benq XL2730Z (1440P 144Hz, TN, Freesync) & 2x ASUS VE248
Case Corsair Obsidian 750D
Audio Device(s) Topping D50S + THX AAA 789, TH-X00 w/ V-Moda Boompro; 7Hz Timeless
Power Supply Corsair HX1000i
Mouse Sharkoon Fireglider optical
Keyboard Corsair K95 RGB
Software Windows 11 Pro
If you do decide to do that, before doing anything, check and make sure there's no obstructions (capacitors, heatsinks, etc) behind the slot that the card would hit (remember the connect or on x16 (if you get one) is about 4 inches long. When I say behind the slot I mean towards the front of the case. Measure from the end of the slot closest to the back of the case, 4 inches towards the front. That area needs to be clear for cutting the slot to work.

If you decide to cut it, be VERY careful, and use a dremel or something if you own one.

You won't need to cut it if you get an x1 card.

EDIT - PCIe is backwards compatible. You can use any version of PCIE.
 

happy

New Member
Joined
Jun 22, 2011
Messages
638 (0.14/day)
System Name HAPPY
Processor i7-2600
Motherboard ASRock P67 EXTREME4 GEN3
Cooling CORSAIR CAFA50 (CPU)
Memory 4GB 1333mhz
Video Card(s) GIGABYTE GV-N460OC-1GI
Storage HITACHI 160GB 7200RPM HDT721016SLA380 & 5 IDE 250GB WD HDD
Power Supply Corsair 650 TX
Software Windows 7 Ultimate x64
I found a link -->http://www.tomshardware.com/forum/249291-30-card for the x1 to x16 mod. Just thinking what would be the best tool to cut it with.
But if I do choose buying the x16 cards that would mean I would have to upgrade the PSU right?
 
Joined
May 21, 2008
Messages
966 (0.17/day)
Processor Ryzen 7 5800X3D
Motherboard MSI MAG X570S Tomahawk Max WiFi
Cooling EK Supremacy EVO Elite + EK D5 + EK 420 Rad, TT Toughfan 140x3, TT Toughfan 120x2, Arctic slim 120
Memory 32GB GSkill DDR4-3600 (F4-3600C16-8GVKC)
Video Card(s) Gigabyte Radeon RX 7900XTX Gaming OC
Storage WDBlack SN850X 4TB, Samsung 950Pro 512GB, Samsung 850EVO 500GB, 6TB WDRed, 36TB NAS, 8TB Lancache
Display(s) Benq XL2730Z (1440P 144Hz, TN, Freesync) & 2x ASUS VE248
Case Corsair Obsidian 750D
Audio Device(s) Topping D50S + THX AAA 789, TH-X00 w/ V-Moda Boompro; 7Hz Timeless
Power Supply Corsair HX1000i
Mouse Sharkoon Fireglider optical
Keyboard Corsair K95 RGB
Software Windows 11 Pro
Yep, that's the deal.

You could cut it with a small saw blade (small-toothed jigsaw or hacksaw blade - by holding the blade in your hand, not using the jigsaw lol) as long as the blade isn't wide enough to come into contact with the metal contacts in the slot, or you could heat up a butter knife with your stove and belt the back out (CAREFUL!), or you could ask Solaris how he did it when he did his

EDIT - Yes, you will definitely need an upgraded power supply if you get an x16 card (unless the x16 card is a radeon 3450 or something EXTREMELY lowend, and even then it's iffy). If you get a PSU you can always re-use it in your next build.
 

happy

New Member
Joined
Jun 22, 2011
Messages
638 (0.14/day)
System Name HAPPY
Processor i7-2600
Motherboard ASRock P67 EXTREME4 GEN3
Cooling CORSAIR CAFA50 (CPU)
Memory 4GB 1333mhz
Video Card(s) GIGABYTE GV-N460OC-1GI
Storage HITACHI 160GB 7200RPM HDT721016SLA380 & 5 IDE 250GB WD HDD
Power Supply Corsair 650 TX
Software Windows 7 Ultimate x64
Alrighty. I guess I have more than enough "informacion" to proceed with this restoration.

Thanks again.

Edit: Forgot to mention, I already purchased the Diamond Products S60PCI Radeon 7000 32MB DDR SDRAM PCI Graphics Card which will be using for the GX270 which has 250w will be enough right?
 
Last edited:

Solaris17

Super Dainty Moderator
Staff member
Joined
Aug 16, 2005
Messages
25,774 (3.79/day)
Location
Alabama
System Name Rocinante
Processor I9 14900KS
Motherboard EVGA z690 Dark KINGPIN (modded BIOS)
Cooling EK-AIO Elite 360 D-RGB
Memory 64GB Gskill Trident Z5 DDR5 6000 @6400
Video Card(s) MSI SUPRIM Liquid X 4090
Storage 1x 500GB 980 Pro | 1x 1TB 980 Pro | 1x 8TB Corsair MP400
Display(s) Odyssey OLED G9 G95SC
Case Lian Li o11 Evo Dynamic White
Audio Device(s) Moondrop S8's on Schiit Hel 2e
Power Supply Bequiet! Power Pro 12 1500w
Mouse Lamzu Atlantis mini (White)
Keyboard Monsgeek M3 Lavender, Akko Crystal Blues
VR HMD Quest 3
Software Windows 11
Benchmark Scores I dont have time for that.
I used an incredibly hot very sharp pocket knife. like this gerber and slowly cut the back off.

EDIT:: that psu is fine for the 7000
 

happy

New Member
Joined
Jun 22, 2011
Messages
638 (0.14/day)
System Name HAPPY
Processor i7-2600
Motherboard ASRock P67 EXTREME4 GEN3
Cooling CORSAIR CAFA50 (CPU)
Memory 4GB 1333mhz
Video Card(s) GIGABYTE GV-N460OC-1GI
Storage HITACHI 160GB 7200RPM HDT721016SLA380 & 5 IDE 250GB WD HDD
Power Supply Corsair 650 TX
Software Windows 7 Ultimate x64
I used an incredibly hot very sharp pocket knife. like this gerber and slowly cut the back off.

EDIT:: that psu is fine for the 7000

I was planning to use a super hot and sharp heated scissors to slowly trim the back off. Well once I do that, I will definitely repost and update with pictures of the result.
 

Solaris17

Super Dainty Moderator
Staff member
Joined
Aug 16, 2005
Messages
25,774 (3.79/day)
Location
Alabama
System Name Rocinante
Processor I9 14900KS
Motherboard EVGA z690 Dark KINGPIN (modded BIOS)
Cooling EK-AIO Elite 360 D-RGB
Memory 64GB Gskill Trident Z5 DDR5 6000 @6400
Video Card(s) MSI SUPRIM Liquid X 4090
Storage 1x 500GB 980 Pro | 1x 1TB 980 Pro | 1x 8TB Corsair MP400
Display(s) Odyssey OLED G9 G95SC
Case Lian Li o11 Evo Dynamic White
Audio Device(s) Moondrop S8's on Schiit Hel 2e
Power Supply Bequiet! Power Pro 12 1500w
Mouse Lamzu Atlantis mini (White)
Keyboard Monsgeek M3 Lavender, Akko Crystal Blues
VR HMD Quest 3
Software Windows 11
Benchmark Scores I dont have time for that.
I was planning to use a super hot and sharp heated scissors to slowly trim the back off. Well once I do that, I will definitely repost and update with pictures of the result.

I really dont think scissors are a good idea they are WAY to thick, not to mention scissors work using a pinch point. they are ALOT duller then you think.
 

happy

New Member
Joined
Jun 22, 2011
Messages
638 (0.14/day)
System Name HAPPY
Processor i7-2600
Motherboard ASRock P67 EXTREME4 GEN3
Cooling CORSAIR CAFA50 (CPU)
Memory 4GB 1333mhz
Video Card(s) GIGABYTE GV-N460OC-1GI
Storage HITACHI 160GB 7200RPM HDT721016SLA380 & 5 IDE 250GB WD HDD
Power Supply Corsair 650 TX
Software Windows 7 Ultimate x64
When you cut with knife, and inserted the x16 x8, or x4 card it worked flawlessly without any hitch? Does the card wiggle alot afterwards?
 
Joined
May 21, 2008
Messages
966 (0.17/day)
Processor Ryzen 7 5800X3D
Motherboard MSI MAG X570S Tomahawk Max WiFi
Cooling EK Supremacy EVO Elite + EK D5 + EK 420 Rad, TT Toughfan 140x3, TT Toughfan 120x2, Arctic slim 120
Memory 32GB GSkill DDR4-3600 (F4-3600C16-8GVKC)
Video Card(s) Gigabyte Radeon RX 7900XTX Gaming OC
Storage WDBlack SN850X 4TB, Samsung 950Pro 512GB, Samsung 850EVO 500GB, 6TB WDRed, 36TB NAS, 8TB Lancache
Display(s) Benq XL2730Z (1440P 144Hz, TN, Freesync) & 2x ASUS VE248
Case Corsair Obsidian 750D
Audio Device(s) Topping D50S + THX AAA 789, TH-X00 w/ V-Moda Boompro; 7Hz Timeless
Power Supply Corsair HX1000i
Mouse Sharkoon Fireglider optical
Keyboard Corsair K95 RGB
Software Windows 11 Pro
I really dont think scissors are a good idea they are WAY to thick, not to mention scissors work using a pinch point. they are ALOT duller then you think.

^ This.
 

Solaris17

Super Dainty Moderator
Staff member
Joined
Aug 16, 2005
Messages
25,774 (3.79/day)
Location
Alabama
System Name Rocinante
Processor I9 14900KS
Motherboard EVGA z690 Dark KINGPIN (modded BIOS)
Cooling EK-AIO Elite 360 D-RGB
Memory 64GB Gskill Trident Z5 DDR5 6000 @6400
Video Card(s) MSI SUPRIM Liquid X 4090
Storage 1x 500GB 980 Pro | 1x 1TB 980 Pro | 1x 8TB Corsair MP400
Display(s) Odyssey OLED G9 G95SC
Case Lian Li o11 Evo Dynamic White
Audio Device(s) Moondrop S8's on Schiit Hel 2e
Power Supply Bequiet! Power Pro 12 1500w
Mouse Lamzu Atlantis mini (White)
Keyboard Monsgeek M3 Lavender, Akko Crystal Blues
VR HMD Quest 3
Software Windows 11
Benchmark Scores I dont have time for that.
When you cut with knife, and inserted the x16 x8, or x4 card it worked flawlessly without any hitch? Does the card wiggle alot afterwards?

ya it wiggles i dont think any more then the actual x1 cards i have. my usb 3 card and sound card are x1 and those wiggle about as much as the card did. (they dont have locks) and ya started right up worked fine.

EDIT: dont use scissors on a x16 or w/e card to get it to fit into x1 either. you WILL flex the PCB it will crack and you will be fucked.
 
Last edited:

happy

New Member
Joined
Jun 22, 2011
Messages
638 (0.14/day)
System Name HAPPY
Processor i7-2600
Motherboard ASRock P67 EXTREME4 GEN3
Cooling CORSAIR CAFA50 (CPU)
Memory 4GB 1333mhz
Video Card(s) GIGABYTE GV-N460OC-1GI
Storage HITACHI 160GB 7200RPM HDT721016SLA380 & 5 IDE 250GB WD HDD
Power Supply Corsair 650 TX
Software Windows 7 Ultimate x64
Alright,
Thanks

Edit: Yeah, I am just only going to cut the back of the x1 slot or sodder like the guy I found in the link. Another thing is he didn't specify where the melted plastic went. Do you wipe the melted plastic with paper or tissue right after it has melted? Wouldn't the melted plastic (being super hot) damage the surrounding area that is dripped down?
 
Last edited:
Joined
May 21, 2008
Messages
966 (0.17/day)
Processor Ryzen 7 5800X3D
Motherboard MSI MAG X570S Tomahawk Max WiFi
Cooling EK Supremacy EVO Elite + EK D5 + EK 420 Rad, TT Toughfan 140x3, TT Toughfan 120x2, Arctic slim 120
Memory 32GB GSkill DDR4-3600 (F4-3600C16-8GVKC)
Video Card(s) Gigabyte Radeon RX 7900XTX Gaming OC
Storage WDBlack SN850X 4TB, Samsung 950Pro 512GB, Samsung 850EVO 500GB, 6TB WDRed, 36TB NAS, 8TB Lancache
Display(s) Benq XL2730Z (1440P 144Hz, TN, Freesync) & 2x ASUS VE248
Case Corsair Obsidian 750D
Audio Device(s) Topping D50S + THX AAA 789, TH-X00 w/ V-Moda Boompro; 7Hz Timeless
Power Supply Corsair HX1000i
Mouse Sharkoon Fireglider optical
Keyboard Corsair K95 RGB
Software Windows 11 Pro
Going to bed. Good luck.
 

happy

New Member
Joined
Jun 22, 2011
Messages
638 (0.14/day)
System Name HAPPY
Processor i7-2600
Motherboard ASRock P67 EXTREME4 GEN3
Cooling CORSAIR CAFA50 (CPU)
Memory 4GB 1333mhz
Video Card(s) GIGABYTE GV-N460OC-1GI
Storage HITACHI 160GB 7200RPM HDT721016SLA380 & 5 IDE 250GB WD HDD
Power Supply Corsair 650 TX
Software Windows 7 Ultimate x64

Solaris17

Super Dainty Moderator
Staff member
Joined
Aug 16, 2005
Messages
25,774 (3.79/day)
Location
Alabama
System Name Rocinante
Processor I9 14900KS
Motherboard EVGA z690 Dark KINGPIN (modded BIOS)
Cooling EK-AIO Elite 360 D-RGB
Memory 64GB Gskill Trident Z5 DDR5 6000 @6400
Video Card(s) MSI SUPRIM Liquid X 4090
Storage 1x 500GB 980 Pro | 1x 1TB 980 Pro | 1x 8TB Corsair MP400
Display(s) Odyssey OLED G9 G95SC
Case Lian Li o11 Evo Dynamic White
Audio Device(s) Moondrop S8's on Schiit Hel 2e
Power Supply Bequiet! Power Pro 12 1500w
Mouse Lamzu Atlantis mini (White)
Keyboard Monsgeek M3 Lavender, Akko Crystal Blues
VR HMD Quest 3
Software Windows 11
Benchmark Scores I dont have time for that.
no it shaves off like cheese. it doesnt run like water. it has the consitency of warm butter.
 

happy

New Member
Joined
Jun 22, 2011
Messages
638 (0.14/day)
System Name HAPPY
Processor i7-2600
Motherboard ASRock P67 EXTREME4 GEN3
Cooling CORSAIR CAFA50 (CPU)
Memory 4GB 1333mhz
Video Card(s) GIGABYTE GV-N460OC-1GI
Storage HITACHI 160GB 7200RPM HDT721016SLA380 & 5 IDE 250GB WD HDD
Power Supply Corsair 650 TX
Software Windows 7 Ultimate x64
I read more into the tomshardware thread and found that some in fact cut the pci x16 card's extra pin and covered with electrical tape.
 

Solaris17

Super Dainty Moderator
Staff member
Joined
Aug 16, 2005
Messages
25,774 (3.79/day)
Location
Alabama
System Name Rocinante
Processor I9 14900KS
Motherboard EVGA z690 Dark KINGPIN (modded BIOS)
Cooling EK-AIO Elite 360 D-RGB
Memory 64GB Gskill Trident Z5 DDR5 6000 @6400
Video Card(s) MSI SUPRIM Liquid X 4090
Storage 1x 500GB 980 Pro | 1x 1TB 980 Pro | 1x 8TB Corsair MP400
Display(s) Odyssey OLED G9 G95SC
Case Lian Li o11 Evo Dynamic White
Audio Device(s) Moondrop S8's on Schiit Hel 2e
Power Supply Bequiet! Power Pro 12 1500w
Mouse Lamzu Atlantis mini (White)
Keyboard Monsgeek M3 Lavender, Akko Crystal Blues
VR HMD Quest 3
Software Windows 11
Benchmark Scores I dont have time for that.
I read more into the tomshardware thread and found that some in fact cut the pci x16 card's extra pin and covered with electrical tape.

you can do it either way. cut the slot. cut the connector. but imo i would just save yourself the hassle if you dont have the tools and buy an x1 card.
 

happy

New Member
Joined
Jun 22, 2011
Messages
638 (0.14/day)
System Name HAPPY
Processor i7-2600
Motherboard ASRock P67 EXTREME4 GEN3
Cooling CORSAIR CAFA50 (CPU)
Memory 4GB 1333mhz
Video Card(s) GIGABYTE GV-N460OC-1GI
Storage HITACHI 160GB 7200RPM HDT721016SLA380 & 5 IDE 250GB WD HDD
Power Supply Corsair 650 TX
Software Windows 7 Ultimate x64
Well, Thanks for all the help. I will just see what I will do.
 

Solaris17

Super Dainty Moderator
Staff member
Joined
Aug 16, 2005
Messages
25,774 (3.79/day)
Location
Alabama
System Name Rocinante
Processor I9 14900KS
Motherboard EVGA z690 Dark KINGPIN (modded BIOS)
Cooling EK-AIO Elite 360 D-RGB
Memory 64GB Gskill Trident Z5 DDR5 6000 @6400
Video Card(s) MSI SUPRIM Liquid X 4090
Storage 1x 500GB 980 Pro | 1x 1TB 980 Pro | 1x 8TB Corsair MP400
Display(s) Odyssey OLED G9 G95SC
Case Lian Li o11 Evo Dynamic White
Audio Device(s) Moondrop S8's on Schiit Hel 2e
Power Supply Bequiet! Power Pro 12 1500w
Mouse Lamzu Atlantis mini (White)
Keyboard Monsgeek M3 Lavender, Akko Crystal Blues
VR HMD Quest 3
Software Windows 11
Benchmark Scores I dont have time for that.
you better follow up, or your going to be on my shit list. If i dont get to see how this ends I will be upset. so you come back and you bump this thread and I want pics. and CPUZ and GPUZ shots. use the prntscrn button and CTRL-V in paint. you just dont stop story time before the books done bro.
 
Top