• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

How's the cable management for a noob?

Joined
Dec 20, 2010
Messages
652 (0.13/day)
Location
Fresno, CA
System Name LS Vtec B18B1 Bolt Ons
Processor AMD Phenom ii 1045t x6 @ 3.5Ghz OC
Motherboard ASRock 970 Extreme3 R2.0 AM3+
Cooling CM Hyper 212 EVO Push Pull
Memory CORSAIR Vengeance 8GB (2 x 4GB) Black 1600Mhz
Video Card(s) Sapphire 7950 Dual-X
Storage Samsung EVO 250gb SSD/Samsung 500gb 7200 rpm/WD Cavirar Green 1TB
Display(s) Acer H236HLbid IPS
Case NZXT Gamma (Powder Coated Champion White)
Audio Device(s) Creative Lab SB0460
Power Supply NZXT HALE82 V2 550W
Software Windows 7 Ultimate 64bit SP1
Benchmark Scores Vtec
What you could do.... is cut cable management wholes and route the cables behind the motherboard Tray. You could then get grommet edging for the sharp edges on the wholes to give it a finished look.
You didn't do too bad for your first time. Everyone goes through a learning phase with this.
The other way if you don't want to cut wholes.... is to cable sleeve your power supply. Make the wires uniform and nice looking. If you can't hide them this will help!

Or just buy a cheap case with cable management wholes in it. They do sell them like this one.....http://www.nzxt.com/new/products/classic_series/beta_evo

About 30 Bucks but it will allow you to hide everything if your that concerned with it. Nice first job though bud way to go!!! :)

I wish I can cut the case, but it's a school project computer.
 
Joined
Jul 14, 2006
Messages
2,411 (0.37/day)
Location
People's Republic of America
System Name It's just a computer
Processor i9-9900K Direct Die
Motherboard eVGA Z390 Dark
Cooling Dual D5T Vario, XSPC BayRes, Nemesis GTR560, NF-A14-iPPC3000PWM, NF-A14-iPPC2000, HK IV Pro Nickel
Memory G.Skill F4-4500C19D-16GTZKKE or G.Skill F4-3600C16D-16GTZ or G.Skill F4-4000C19D-32GTZSW
Video Card(s) eVGA RTX2080 FTW3 Ultra
Storage Samsung 960 EVO M.2
Display(s) LG 32GK650F
Case Thermaltake Xaser VI
Audio Device(s) Auzentech X-Meridian 7.1 2G/Z-5500
Power Supply Seasonic Prime PX-1300
Mouse Logitech
Keyboard Logitech
Software Win7 Ultimate x64 SP1
I wish I can cut the case, but it's a school project computer.

You are not even going to consider getting a handful of the cable tie mounts I suggested?
 

trickson

OH, I have such a headache
Joined
Dec 5, 2004
Messages
7,595 (1.07/day)
Location
Planet Earth.
System Name Ryzen TUF.
Processor AMD Ryzen7 3700X
Motherboard Asus TUF X570 Gaming Plus
Cooling Noctua
Memory Gskill RipJaws 3466MHz
Video Card(s) Asus TUF 1650 Super Clocked.
Storage CB 1T M.2 Drive.
Display(s) 73" Soney 4K.
Case Antech LanAir Pro.
Audio Device(s) Denon AVR-S750H
Power Supply Corsair TX750
Mouse Optical
Keyboard K120 Logitech
Software Windows 10 64 bit Home OEM
You need cable ties and to rout your cables behind things such as the MB tray. I just done some work on mine today and this is what it looks like now.View attachment 46134
View attachment 46136
Even with this case as it is I have limited wire site, Yes you can see them but it looks far cleaner now. took one hour to do.
 
Joined
Oct 6, 2009
Messages
2,820 (0.53/day)
Location
Midwest USA
System Name My Gaming System
Processor Intel i7 4770k @ 4.4 Ghz
Motherboard Asus Maximus VI Impact (ITX)
Cooling Custom Full System Water cooling Loop
Memory G.Skill 1866 Mhz Sniper 8 Gb
Video Card(s) EVGA GTX 780 ti SC
Storage Samsung SSD EVO 120GB - Samsung SSD EVO 500GB
Display(s) ASUS W246H - 24" - widescreen TFT active matrix LCD
Case Bitfenix Prodigy
Power Supply Corsair AX760 Modular PSU
Software Windows 8.1 Home Primeum
I wish I can cut the case, but it's a school project computer.

Ahh didn't see that..... well the bad news is for everyone sometimes we run across things that are just not perfect. But for what you had to work with you did a great job!!!
 

theonedub

habe fidem
Joined
Apr 30, 2009
Messages
8,025 (1.47/day)
Location
Northern CA, USA
System Name Erakith || AsRock NUCS
Processor AMD ThreadRipper 2990WX ES (32c/64t 3.5ghz@1.02v) || Intel i7 1360P Raptor Lake-P
Motherboard MSI X399 MEG Creation || AsRock OE
Cooling EK Supremacy TR4 Full Nickel, D5 w/ EK Top, 2X EK-CoolStream XTX 360 & Photon 270 Res || OE
Memory 32GB (4x8GB) Corsair Vengeance PRO RGB DDR4 3000|| 2x16GB Corsair DDR4
Video Card(s) Vega 64 EK FC|| Intel Iris Xe
Storage 250gb WD Black NVMe & (2) 2TB Intel 660p NVMe || 2TB Corsair MP600 Pro
Display(s) 34" Dell Ultrasharp U3415W
Case CaseLabs Merlin SM8 || Aluminum Unibody
Power Supply Corsair HX1000
Mouse Corsair Harpoon Wireless RGB
Keyboard Corsair Strafe RGB w/ Cherry MX Silent
Software Windows 10 Pro x64 || WIndows 11 Pro x64
Benchmark Scores WCG & F@H Only
You need cable ties and to rout your cables behind things such as the MB tray. I just done some work on mine today and this is what it looks like now.http://www.techpowerup.com/forums/attachment.php?attachmentid=46134&d=1331409816
http://www.techpowerup.com/forums/attachment.php?attachmentid=46136&d=1331409846
Even with this case as it is I have limited wire site, Yes you can see them but it looks far cleaner now. took one hour to do.

Time for a good dusting and wipe down.
 

trickson

OH, I have such a headache
Joined
Dec 5, 2004
Messages
7,595 (1.07/day)
Location
Planet Earth.
System Name Ryzen TUF.
Processor AMD Ryzen7 3700X
Motherboard Asus TUF X570 Gaming Plus
Cooling Noctua
Memory Gskill RipJaws 3466MHz
Video Card(s) Asus TUF 1650 Super Clocked.
Storage CB 1T M.2 Drive.
Display(s) 73" Soney 4K.
Case Antech LanAir Pro.
Audio Device(s) Denon AVR-S750H
Power Supply Corsair TX750
Mouse Optical
Keyboard K120 Logitech
Software Windows 10 64 bit Home OEM
Joined
Dec 20, 2010
Messages
652 (0.13/day)
Location
Fresno, CA
System Name LS Vtec B18B1 Bolt Ons
Processor AMD Phenom ii 1045t x6 @ 3.5Ghz OC
Motherboard ASRock 970 Extreme3 R2.0 AM3+
Cooling CM Hyper 212 EVO Push Pull
Memory CORSAIR Vengeance 8GB (2 x 4GB) Black 1600Mhz
Video Card(s) Sapphire 7950 Dual-X
Storage Samsung EVO 250gb SSD/Samsung 500gb 7200 rpm/WD Cavirar Green 1TB
Display(s) Acer H236HLbid IPS
Case NZXT Gamma (Powder Coated Champion White)
Audio Device(s) Creative Lab SB0460
Power Supply NZXT HALE82 V2 550W
Software Windows 7 Ultimate 64bit SP1
Benchmark Scores Vtec
You are not even going to consider getting a handful of the cable tie mounts I suggested?

It's the weekend, I'll do it on Monday.
 
Joined
Dec 20, 2010
Messages
652 (0.13/day)
Location
Fresno, CA
System Name LS Vtec B18B1 Bolt Ons
Processor AMD Phenom ii 1045t x6 @ 3.5Ghz OC
Motherboard ASRock 970 Extreme3 R2.0 AM3+
Cooling CM Hyper 212 EVO Push Pull
Memory CORSAIR Vengeance 8GB (2 x 4GB) Black 1600Mhz
Video Card(s) Sapphire 7950 Dual-X
Storage Samsung EVO 250gb SSD/Samsung 500gb 7200 rpm/WD Cavirar Green 1TB
Display(s) Acer H236HLbid IPS
Case NZXT Gamma (Powder Coated Champion White)
Audio Device(s) Creative Lab SB0460
Power Supply NZXT HALE82 V2 550W
Software Windows 7 Ultimate 64bit SP1
Benchmark Scores Vtec
Ahh didn't see that..... well the bad news is for everyone sometimes we run across things that are just not perfect. But for what you had to work with you did a great job!!!

Thanks.
 
Joined
Oct 29, 2009
Messages
2,669 (0.50/day)
System Name Old Gateway / Steam Deck OLED LE
Processor i5 4440 3.1ghz / Jupiter 4c 8t
Motherboard Gateway / Valve
Cooling Eh it doesn't thermal throttle
Memory 2x 8GB JEDEC 1600mhz DDR3 / 16gb DDR5 6400
Video Card(s) RX 560D 4GB / Navi II 8CU
Storage 240gb 2.5 SSD / 1TB nvme
Display(s) Dell @ 1280*1024 75hz / 800p OLED
Case Gateway / Valve LE
Audio Device(s) Gateway Diamond Audio EMC2.0-USB 5375U ($15 a long ass time ago), Valve
Power Supply 380w oem / 65w valve USB-C
Mouse Purple Walmart special, 1600dpi. Black desk mat
Keyboard SteelSeries Apex 100 / virtual
VR HMD Lmao
Software Windows 10 / Steam OS
Benchmark Scores It can run Crysis (Original), Doom 2016, and Halo MCC. SD LE 45fps
hmm... what are the specs of that rig you built? Me tinkering with comps in high school quickly led to me being Tech Support for the whole school my Jr. and Sr. years lol.
 
Joined
Dec 20, 2010
Messages
652 (0.13/day)
Location
Fresno, CA
System Name LS Vtec B18B1 Bolt Ons
Processor AMD Phenom ii 1045t x6 @ 3.5Ghz OC
Motherboard ASRock 970 Extreme3 R2.0 AM3+
Cooling CM Hyper 212 EVO Push Pull
Memory CORSAIR Vengeance 8GB (2 x 4GB) Black 1600Mhz
Video Card(s) Sapphire 7950 Dual-X
Storage Samsung EVO 250gb SSD/Samsung 500gb 7200 rpm/WD Cavirar Green 1TB
Display(s) Acer H236HLbid IPS
Case NZXT Gamma (Powder Coated Champion White)
Audio Device(s) Creative Lab SB0460
Power Supply NZXT HALE82 V2 550W
Software Windows 7 Ultimate 64bit SP1
Benchmark Scores Vtec
hmm... what are the specs of that rig you built? Me tinkering with comps in high school quickly led to me being Tech Support for the whole school my Jr. and Sr. years lol.

We're using a AMD Athlon @ 3.0ghz, 4gb ddr3 1333mhz, WD Caviar Blue 250gb, Antec Green Series 380w, and a Antec 300 case.
 
Top