aleicgrant
New Member
- Joined
- May 20, 2009
- Messages
- 64 (0.01/day)
System Name | Cosmos S Extreme |
---|---|
Processor | Intel i7 965 Extreme |
Motherboard | Asus Rampage II Extreme |
Cooling | Coolermaster V-10 |
Memory | 12gb Corsair DDR3 1600 |
Video Card(s) | EVGA quad sli 295 GTX |
Storage | 120gb OCZ Vertex, 4 2tb hard drives |
Display(s) | Gateway XHD3000 |
Case | Coolermaster Cosmos S |
Audio Device(s) | Asus Xonas HDAV |
Power Supply | Tagan 1300w |
Software | Window 7 Ultimate 64bit |
Hey all
I need some help. I have pulled out all my hair and about to lose it....
I have a water cooled rig I have put together and for the life of me having some sort of short that I cannot find. This is after going through the build at least 10 times.
Here is the rig
i7 2600k
MSI Z68 GD80
16gb Corsair mem
XFX 1250 Black Edition PSU
XFX 3GB 7970 Black edition.
Water cooling equipment:
Swiftech Komodo full coverage block
2 x RX360 Rads
Koolance RP-1000BK pump and res combo with fan controller
6 x 120mm Gental Typhoon 15 Fans
Koolance CPU block
So here is the problem. With the Komodo block installed on the 7970, no boot, power or anything.
take the card out, boots (has onboard video)
Run the card with the oem fan........boot
Plugged three different lower grade cards in same slot........boot
Take the block off and run the 7970 just by itself for a few second.........boot
I have checked everything, and I mean everything in terms of connections.
what am I missing that causes this not to boot when the gpu block is on.
INSANITY !!!!!!!!!!!!
I need some help. I have pulled out all my hair and about to lose it....
I have a water cooled rig I have put together and for the life of me having some sort of short that I cannot find. This is after going through the build at least 10 times.
Here is the rig
i7 2600k
MSI Z68 GD80
16gb Corsair mem
XFX 1250 Black Edition PSU
XFX 3GB 7970 Black edition.
Water cooling equipment:
Swiftech Komodo full coverage block
2 x RX360 Rads
Koolance RP-1000BK pump and res combo with fan controller
6 x 120mm Gental Typhoon 15 Fans
Koolance CPU block
So here is the problem. With the Komodo block installed on the 7970, no boot, power or anything.
take the card out, boots (has onboard video)
Run the card with the oem fan........boot
Plugged three different lower grade cards in same slot........boot
Take the block off and run the 7970 just by itself for a few second.........boot
I have checked everything, and I mean everything in terms of connections.
what am I missing that causes this not to boot when the gpu block is on.
INSANITY !!!!!!!!!!!!