- Joined
- Jul 23, 2010
- Messages
- 304 (0.06/day)
System Name | i5 Raket Meer -S |
---|---|
Processor | i5 11600KF @ 5.3ghz (all cores active) 5.5ghz (3 cores active) Idle: 1.4615v load: 1.4850v |
Motherboard | Gigabyte Z590 AORUS ELITE AX |
Cooling | Enermax Liqmax III 360 ARGB |
Memory | Crucial Ballistix DDR4 2x8GB | Stock: 2667mhz 19-19-19-43 1.2v |@ 19-19-19-43 3733mhz 1.45v |
Video Card(s) | MSI RTX 3060TI |
Storage | Crucial P5 Plus 1Tb Gen4 || Samsung EVO 850 1 TB |
Case | Fractal Design S2 |
Audio Device(s) | onboard |
Power Supply | Corsair HX750 V2, 80 Plus Platinum |
Mouse | Logitech G305 |
Keyboard | Logitech MX keys |
Software | Win 11 pro |
Benchmark Scores | Data not available. |
Ok I now have installed 4 more GB's of The same Kingston Hyper X ram as I had in my system before , KHX8500D2T 1K2/4g X 4 sticks . Here is the big problem it will not run at 1066 MHz . Why ??? It acts as if it wants to boot but hangs . I even set every thing to stock speeds and tried it like that , no go . It runs at 890MHz or even 800 MHz just not 1066 . Is this becasue I have all 4 slots occupied ?
there are several possible solutions for this. first of what mobo are you using ?
it's possible your mobo only supports ddr2 800 speeds check on the mobo's vendor site.
you can try to manual set the timmings according to the sticker on the ram
don't touch the ram voltage because it should be able to run @ default voltage.
if that does not work you can try to install just 1 or 2 sticks... just remember to always put the sticks in dual channel configuration, if using more then 1 mem stick
if all that still does not work you can try a bios update, sometimes it's required for running more then 2 mem sticks