babash*t
New Member
- Joined
- Mar 28, 2012
- Messages
- 74 (0.02/day)
- Location
- Nairobi, Kenya
System Name | Baba |
---|---|
Processor | AMD FX 8120 @4.2Ghz |
Motherboard | MSi 990FX GD65 |
Cooling | Thermaltake Frio |
Memory | 2x4gb Corsair Vengeance LP |
Video Card(s) | Sapphire HD 7870 2gb |
Storage | 500GB WD blue + 2x2TB WD green |
Display(s) | 2x AOC i2353Fh IPS LED Monitors |
Case | Generic |
Audio Device(s) | Onboard |
Power Supply | CoolerMaster GX650 Bronze |
Software | Win 7 Ultimate 64bit / Win 8 64bit Release Preview |
I just realised that everytime i start core temp (RC3 i think) my multiplier goes all the way down from 21 to 7, but the bclk doesn't change, even if the pc was running at full load. Ive tried running at different clocks(all stable) but just starting Core temp messes everything up.
The problem is the same on both Win7 ultimate x64 and Win 8 dev/customer/release preview x64.
Any fixes to this? Or any good alternative software software that will monitor my temps?
The problem is the same on both Win7 ultimate x64 and Win 8 dev/customer/release preview x64.
Any fixes to this? Or any good alternative software software that will monitor my temps?