• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Replace thermal paste regularly

Joined
May 30, 2007
Messages
9,019 (1.47/day)
System Name Black Panther
Processor i9 9900k
Motherboard Gigabyte Z390 AORUS PRO Wifi 1.0
Cooling NZXT Kraken X72 360mm
Memory 2 x 8GB Corsair Vengeance RGB Pro DDR4 3600Mhz
Video Card(s) Palit RTX2080 Ti Dual 11GB DDR6
Storage Samsung EVO 970 500GB SSD M.2 & 2TB Seagate Barracuda 7200rpm
Display(s) 32'' Gigabyte G32QC 2560x1440 165Hz
Case NZXT H710i Black
Audio Device(s) Razer Electra V2 & Z5500 Speakers
Power Supply Seasonic Focus GX-850 Gold 80+
Mouse Some Corsair lost the box forgot the model
Keyboard Motospeed
Software Windows 10
This goes for everyone, but especially us who have our processors at 100% most of the time.

Recently I decided to check my temperatures and got a small shock. With boinc at 100% the cores were reaching 68°C :eek:
It had been some time since I last checked load temperatures since the last time I did they were comfortably in the highish 50's range.
And it had been even longer since I replaced thermal paste. Perhaps a year and a half... or even two! It was when I replaced the E4300 with the E8400...

So I took out the cooler, cleaned, put a dab of AS5 and... voila' - not bad for a 3Ghz processor overclocked to 4Ghz, on air. :)

Also, AS5 has a curing time of ~200 hours so after that my temps should go down by another degree or two after curing time is over.

 
Joined
Jan 24, 2010
Messages
3,603 (0.70/day)
Location
Oregon, USA
System Name GLaDOS
Processor AMD FX-9590 X8 4.7GHz
Motherboard ASUS Sabertooth 990FX
Cooling Corsair H80i v2
Memory Corsair Vengeance 24GB (2x8GB, 2x4GB) DDR3 1600 MHz
Video Card(s) ASUS ROG-STRIX-RX580-O8G-GAMINGOC
Storage WD Blue 3D NAND 1TB Internal PC SSD
Display(s) 2 Acer S231HL 23" LED backlit LCD's on a Dual LCD stand
Case Corsair iCUE 220T RGB Airflow
Audio Device(s) Onboard - Corsair Void Pro Wireless
Power Supply Corsair 850HXi 850W
Mouse Corsair Sabre RGB
Keyboard Corsair K70 LUX RGB
Software Microsoft Windows 10 Pro 64 Bit
Haven't had that problem with MX-2. :p
 
Joined
May 30, 2007
Messages
9,019 (1.47/day)
System Name Black Panther
Processor i9 9900k
Motherboard Gigabyte Z390 AORUS PRO Wifi 1.0
Cooling NZXT Kraken X72 360mm
Memory 2 x 8GB Corsair Vengeance RGB Pro DDR4 3600Mhz
Video Card(s) Palit RTX2080 Ti Dual 11GB DDR6
Storage Samsung EVO 970 500GB SSD M.2 & 2TB Seagate Barracuda 7200rpm
Display(s) 32'' Gigabyte G32QC 2560x1440 165Hz
Case NZXT H710i Black
Audio Device(s) Razer Electra V2 & Z5500 Speakers
Power Supply Seasonic Focus GX-850 Gold 80+
Mouse Some Corsair lost the box forgot the model
Keyboard Motospeed
Software Windows 10
I honestly don't remember which thermal paste I had applied since it was like 2 years ago. I suspect it's the zalman paste which had come with the cooler... but I can't vouch for it.

As soon as I removed the cooler I realized the problem - the paste was like dry flaky paint, very brittle.
 
Joined
Nov 29, 2011
Messages
5,975 (1.33/day)
Location
Hi! I'm from the Internet
System Name Selene / Yoda
Processor Fx 8350 @ 4.4 / Phenom II x6 1090t @ 3.6
Motherboard Gigabyte 990FXA-UD3 r4.0 / Gigabyte 890XA-UD3
Cooling H100i / Xig Dark Knight
Memory 4x 8gb G.Skill Snipers / 4x 4gb G.Skill Ares
Video Card(s) Gigabyte R9 290x / XfX DD & VisionTek HD6850's C'fired
Storage 256gb ssd, 2x 2tb Wd Blacks & 1x 1tb Wd black / 1x 1tb
Display(s) Dell Ultra Sharp 2408 WFp / Hp w2207
Case Raidmax Vampire / Chieftec Alum. Dragon Blue
Audio Device(s) Onboard Hd Audio / Onboard Hd Audio
Power Supply Corsair TX 850 watt / Corsair TX 750 watt
Mouse Logitech G500s
Keyboard Corsair Strafe
Software Win 10 pro / Win Vista Home prem. 64 bit
Benchmark Scores What are benchmarks anyway?
I do try to replace my paste atleast once a year and do a through system cleaning at the same time.
 
Joined
May 9, 2011
Messages
1,980 (0.42/day)
Location
Mainland Britain
System Name H2o Box
Processor Intel(R) Xeon e5-2690 v2 Stock 3.300 GHz stock
Motherboard MSI X79A-G43 Plus (MS-7760) v3
Cooling CPU EK & Phobya G-Changer 360 V2.0 RAD H2o VGA "AlphaCool M18" Hybrid [pump replaced 18/8/21]
Memory G.Skill TridentX 16Gb 11-12-12-32 2T @ 1866Mhz [locked]
Video Card(s) Zotac GTX 1080ti AMP EXTREME
Storage HyperX Fury 120GB & Savage 480GB SSD, Seagate 250GB,250GB 7200rpm Kingston 64GB SSD
Display(s) Asus TUF Gaming VG32VQR 2560*1440 165Hz VA Panel
Case Corsair O-800D
Audio Device(s) Creative Sound Blaster X-Fi Titanium Fatal1ty Pro
Power Supply Be Quiet! [Dark Power Pro 11] 1200W CM replaced [7-4-2017]
Mouse Zelotes T-90
Keyboard K66 Mechanical US Layout
Software Win 10 Pro 64Bit v 20H2 / OS [build 19043.1237] WFEP 120.2212.3530.0
Hi

Using a non curing paste, MX-4 get's changed when I service the H2o every six months or so

atb (all the best)

Law-II
 

theonedub

habe fidem
Joined
Apr 30, 2009
Messages
8,025 (1.47/day)
Location
Northern CA, USA
System Name Erakith || AsRock NUCS
Processor AMD ThreadRipper 2990WX ES (32c/64t 3.5ghz@1.02v) || Intel i7 1360P Raptor Lake-P
Motherboard MSI X399 MEG Creation || AsRock OE
Cooling EK Supremacy TR4 Full Nickel, D5 w/ EK Top, 2X EK-CoolStream XTX 360 & Photon 270 Res || OE
Memory 32GB (4x8GB) Corsair Vengeance PRO RGB DDR4 3000|| 2x16GB Corsair DDR4
Video Card(s) Vega 64 EK FC|| Intel Iris Xe
Storage 250gb WD Black NVMe & (2) 2TB Intel 660p NVMe || 2TB Corsair MP600 Pro
Display(s) 34" Dell Ultrasharp U3415W
Case CaseLabs Merlin SM8 || Aluminum Unibody
Power Supply Corsair HX1000
Mouse Corsair Harpoon Wireless RGB
Keyboard Corsair Strafe RGB w/ Cherry MX Silent
Software Windows 10 Pro x64 || WIndows 11 Pro x64
Benchmark Scores WCG & F@H Only
I honestly don't remember which thermal paste I had applied since it was like 2 years ago. I suspect it's the zalman paste which had come with the cooler... but I can't vouch for it.

As soon as I removed the cooler I realized the problem - the paste was like dry flaky paint, very brittle.

I was using this Zalman ZM-STG2 paste and it was performing really well, but when I upgraded my CPU I also noticed that it had dried up into a flaky mess too.
 

qubit

Overclocked quantum bit
Joined
Dec 6, 2007
Messages
17,866 (3.00/day)
Location
Quantum Well UK
System Name Quantumville™
Processor Intel Core i7-2700K @ 4GHz
Motherboard Asus P8Z68-V PRO/GEN3
Cooling Noctua NH-D14
Memory 16GB (2 x 8GB Corsair Vengeance Black DDR3 PC3-12800 C9 1600MHz)
Video Card(s) MSI RTX 2080 SUPER Gaming X Trio
Storage Samsung 850 Pro 256GB | WD Black 4TB | WD Blue 6TB
Display(s) ASUS ROG Strix XG27UQR (4K, 144Hz, G-SYNC compatible) | Asus MG28UQ (4K, 60Hz, FreeSync compatible)
Case Cooler Master HAF 922
Audio Device(s) Creative Sound Blaster X-Fi Fatal1ty PCIe
Power Supply Corsair AX1600i
Mouse Microsoft Intellimouse Pro - Black Shadow
Keyboard Yes
Software Windows 10 Pro 64-bit
I don't think every paste degrades like that. Of course, it's always worth checking your CPU temperature regularly and cleaning out the dust from the cooler.
 
Joined
Jul 19, 2006
Messages
43,585 (6.74/day)
Processor AMD Ryzen 7 7800X3D
Motherboard ASUS TUF x670e
Cooling EK AIO 360. Phantek T30 fans.
Memory 32GB G.Skill 6000Mhz
Video Card(s) Asus RTX 4090
Storage WD m.2
Display(s) LG C2 Evo OLED 42"
Case Lian Li PC 011 Dynamic Evo
Audio Device(s) Topping E70 DAC, SMSL SP200 Headphone Amp.
Power Supply FSP Hydro Ti PRO 1000W
Mouse Razer Basilisk V3 Pro
Keyboard Tester84
Software Windows 11
Yeah, that Zalmann stuff is pretty bad. I had a little bottle of it that dried up about two weeks after I opened it.
 
Joined
Nov 27, 2007
Messages
28,754 (4.82/day)
Location
Miami, Florida
Processor AMD Ryzen 7 7800X3D
Motherboard ASUS ROG Crosshair X670E Hero
Cooling EK FLT 240 DDC, x2 Black Ice Nemesis 360GTX, x1 EK-Quantum Surface P240, Phanteks D30-120 fans x9
Memory G.SKILL Trident Z5 Neo RGB Series (AMD Expo) DDR5 RAM 32GB (2x16GB) 6000MT/s CL30
Video Card(s) ZOTAC Gaming GeForce RTX 4090 AMP Extreme AIRO
Storage Samsung Pro 980 2TB NVMe (OS and Games) // WD Black 10TB HDD (Storage)
Display(s) Samsung 49" Ultrawide Gaming Monitor
Case Phanteks NV7
Power Supply ASUS Rog Thor 1200 Certified 1200W
Software Windows 11 64 Bit Home Edition
I don't think I ever have a rig together that long :laugh:

But anyhow, that is a good catch BP. Thanks for sharing!
 

stinger608

Dedicated TPU Cruncher & Folder
Joined
Nov 11, 2008
Messages
11,102 (1.98/day)
Location
Wyoming
System Name Dean Machine/2020 Ryzenfall
Processor Intel 4790K/AMD Ryzen 3700X
Motherboard MSI 1150 Gaming mATX/Gigabyte AORUS ELITE B550
Cooling Cooler Master Hyper 212 LED/SilverStone AH240 AIO
Memory 16 gigs Crucial Ballistix Tactical Tracer/16 gigs G.Skill TridentZ NEO DDR4
Video Card(s) Gigabyte 1660 Super/Gigabyte GTX 1660
Storage Crucial SSD 256 and 2TB spinner/Dual Samsung 980 Pro M2 NVME 4.0
Display(s) Overlord 27" 2560 x 1440
Case Corsair Air 540
Audio Device(s) On board
Power Supply Seasonic modular 850 watt Platinum/EVGA T2-850 Titanium
Software Windows 10 Pro/Windows 10 Pro
I usually try to change out the TIM at least once a year if I have a rig together that long. It will start to "bake out" if it is not changed fairly regular. If one is in a hot area such as Arizona I would change it at least every 6 months.
 
Joined
Oct 27, 2008
Messages
2,230 (0.40/day)
Location
Look up. Look way up.
System Name Ultimate Vortex III
Processor Intel Core i7-9700K
Motherboard Asus ROG MAXIMUS XI GENE
Cooling Cooler Master Hyper 212 Black Edition
Memory Corsair Vengeance LPX 16GB (2x8Gb) DDR4 DRAM 3200MHz C16
Video Card(s) Asus RX5700-8G Radeon RX 5700
Storage 2 x WD Blue SN550 1Tb NVMe in RAID 0 Striped Set
Display(s) TUF Gaming VG279QL1A 165 Hz
Case Cooler Master MasterBox Pro 5 ARGB
Audio Device(s) Onboard Realtek
Power Supply Coolermaster Silent Pro 850W
Mouse Corsair RGB
Keyboard K70 Rapidfire with Cherry MX Speed
Software Windows 11 Pro x64
I usually do it at least once a year and sometimes 2. Usually at the same time I clean all the dust out.
 
Joined
Nov 29, 2011
Messages
5,975 (1.33/day)
Location
Hi! I'm from the Internet
System Name Selene / Yoda
Processor Fx 8350 @ 4.4 / Phenom II x6 1090t @ 3.6
Motherboard Gigabyte 990FXA-UD3 r4.0 / Gigabyte 890XA-UD3
Cooling H100i / Xig Dark Knight
Memory 4x 8gb G.Skill Snipers / 4x 4gb G.Skill Ares
Video Card(s) Gigabyte R9 290x / XfX DD & VisionTek HD6850's C'fired
Storage 256gb ssd, 2x 2tb Wd Blacks & 1x 1tb Wd black / 1x 1tb
Display(s) Dell Ultra Sharp 2408 WFp / Hp w2207
Case Raidmax Vampire / Chieftec Alum. Dragon Blue
Audio Device(s) Onboard Hd Audio / Onboard Hd Audio
Power Supply Corsair TX 850 watt / Corsair TX 750 watt
Mouse Logitech G500s
Keyboard Corsair Strafe
Software Win 10 pro / Win Vista Home prem. 64 bit
Benchmark Scores What are benchmarks anyway?
I am planning doing all the systems next weekend. And while I am at it I will take a group photo of my farm.
 
Joined
Dec 16, 2010
Messages
1,662 (0.34/day)
Location
State College, PA, US
System Name My Surround PC
Processor AMD Ryzen 9 7950X3D
Motherboard ASUS STRIX X670E-F
Cooling Swiftech MCP35X / EK Quantum CPU / Alphacool GPU / XSPC 480mm w/ Corsair Fans
Memory 96GB (2 x 48 GB) G.Skill DDR5-6000 CL30
Video Card(s) MSI NVIDIA GeForce RTX 4090 Suprim X 24GB
Storage WD SN850 2TB, 2 x 512GB Samsung PM981a, 4 x 4TB HGST NAS HDD for Windows Storage Spaces
Display(s) 2 x Viotek GFI27QXA 27" 4K 120Hz + LG UH850 4K 60Hz + HMD
Case NZXT Source 530
Audio Device(s) Sony MDR-7506 / Logitech Z-5500 5.1
Power Supply Corsair RM1000x 1 kW
Mouse Patriot Viper V560
Keyboard Corsair K100
VR HMD HP Reverb G2
Software Windows 11 Pro x64
Benchmark Scores Mellanox ConnectX-3 10 Gb/s Fiber Network Card
I'm curious. If this is a major issue, does it affect white box systems and pre-applied heatsinks (e.g. most GPUs)?
 
Joined
May 22, 2010
Messages
2,516 (0.50/day)
Location
Canada
System Name m1dg3t | DeathBox | HairPi 3
Processor 3570k @ 4.0 1.15v BIOS | q9550 @ 3.77 1.325v BIOS
Motherboard Asrock z77e iTX | p5q Dlx 2301 BIOS
Cooling Custom Water | D-14 & HR-03gt | Passive HSF
Memory Samsung MV-3V4G3D 4g x 2 @ 1866 1.35v | OcZ RpR 2g x 4 @ 1067 2.2v
Video Card(s) MSi 7950 tf3 @1000 / 1350 | Asus 5870 V2 @ 900 / 1275
Storage Adata sx900 256Gb / WD 2500 HHTZ | WD 1001 FALS x 2
Display(s) BenQ gw2750hm | 46" Sharp Quatron
Case BitFenix Prodigy - m0dd3d | Antec Fusion Remote MAX
Audio Device(s) Onboard Toslink > Yamaha HTR 6290 | Xonar HDAV1.3 > Yamaha DSP z7
Power Supply Ocz mXp700w | Ocz zx850w | Cannakit 5v 2.5a
Mouse Logitech G700s | Logitech G9x - Cable Repaired
Keyboard TT Meka G1 - Black w Cherry Blacks| Logitech G11
Software Win7 Home | Xp sp3 & Vista ultimate | Raspbian
Benchmark Scores Epeen!! Who needs epeen??
I reTIM when I dust the PC, so twice/year....

Never thought of it untill after I did some mods on my very first build, then it hit me :pimp:

All pastes dry up eventually, it's only beneficial to perform regular/preventative maintenance :)

Edit: It's also the first thing I do when I get a GFX card/new CPU :roll:
 
Last edited:
Joined
Mar 18, 2008
Messages
5,398 (0.92/day)
Location
Australia
System Name Night Rider | Mini LAN PC | Workhorse
Processor AMD R7 5800X3D | Ryzen 1600X | i7 970
Motherboard MSi AM4 Pro Carbon | GA- | Gigabyte EX58-UD5
Cooling Noctua U9S Twin Fan| Stock Cooler, Copper Core)| Big shairkan B
Memory 2x8GB DDR4 G.Skill Ripjaws 3600MHz| 2x8GB Corsair 3000 | 6x2GB DDR3 1300 Corsair
Video Card(s) MSI AMD 6750XT | 6500XT | MSI RX 580 8GB
Storage 1TB WD Black NVME / 250GB SSD /2TB WD Black | 500GB SSD WD, 2x1TB, 1x750 | WD 500 SSD/Seagate 320
Display(s) LG 27" 1440P| Samsung 20" S20C300L/DELL 15" | 22" DELL/19"DELL
Case LIAN LI PC-18 | Mini ATX Case (custom) | Atrix C4 9001
Audio Device(s) Onboard | Onbaord | Onboard
Power Supply Silverstone 850 | Silverstone Mini 450W | Corsair CX-750
Mouse Coolermaster Pro | Rapoo V900 | Gigabyte 6850X
Keyboard MAX Keyboard Nighthawk X8 | Creative Fatal1ty eluminx | Some POS Logitech
Software Windows 10 Pro 64 | Windows 10 Pro 64 | Windows 7 Pro 64/Windows 10 Home
I can understand this for people that have there rig running at 100% and with a OC it makes sense. Me personally i haven't had a problem even with my machine running near 24/7. My current rig is 2yrs old still same temps at full load, and my older rig would be 5yrs since its been changed and it still runs very cold, i use IBM paste.
 

stinger608

Dedicated TPU Cruncher & Folder
Joined
Nov 11, 2008
Messages
11,102 (1.98/day)
Location
Wyoming
System Name Dean Machine/2020 Ryzenfall
Processor Intel 4790K/AMD Ryzen 3700X
Motherboard MSI 1150 Gaming mATX/Gigabyte AORUS ELITE B550
Cooling Cooler Master Hyper 212 LED/SilverStone AH240 AIO
Memory 16 gigs Crucial Ballistix Tactical Tracer/16 gigs G.Skill TridentZ NEO DDR4
Video Card(s) Gigabyte 1660 Super/Gigabyte GTX 1660
Storage Crucial SSD 256 and 2TB spinner/Dual Samsung 980 Pro M2 NVME 4.0
Display(s) Overlord 27" 2560 x 1440
Case Corsair Air 540
Audio Device(s) On board
Power Supply Seasonic modular 850 watt Platinum/EVGA T2-850 Titanium
Software Windows 10 Pro/Windows 10 Pro
Joined
Jun 25, 2012
Messages
1,027 (0.24/day)
Location
Patna, Bihar, India, Asia, Earth, Terron System, M
System Name Oldtimer(Always Crunching)
Processor Intel P4 631 @ 3.2 GHz [Stock 3.0 GHz]
Motherboard Intel D945GCPE
Memory 512 MB x2 DDR2 (533MHZ and 366 MHZ)
Storage 160GB Sata1 7200rpm
Display(s) ViewSonic VA703m
Power Supply Normal 450W PSU
Software Windows 7 Ultimate 32bit
Well i replace my thermal paste every 9 months(Well you can call me a thermal paste specialist:cool:)

When the thermal paste gets dry or evaporated then you CPU reaches high temps!
I will suggest to check(and replace it if it is dry or evaporated) every 10-12 month but if you live in hot places like India i will suggest to do it every 9 months:toast:
Well your GPU also needs thermal paste to cool up!:cool:

Well i could made my video for How to remove old thermal paste and install a new coat but i don't have a tripod and no one to hold the camera for me but anyway i searched on youtube and i found this video is the best(The video is at the end of the post) and i will say you must not use normal tissue paper! and the video is demonstrated on a i7 2600K however you can use a different company for the thermal paste but i will recommend to use Artic Silver 5 and for the cleaning solution you can use any cleaning solution !:D

Do you think this is a small and tiny tutorial?:rolleyes:
:rockout:

The youtube video below
 
Last edited by a moderator:
Joined
May 22, 2010
Messages
2,516 (0.50/day)
Location
Canada
System Name m1dg3t | DeathBox | HairPi 3
Processor 3570k @ 4.0 1.15v BIOS | q9550 @ 3.77 1.325v BIOS
Motherboard Asrock z77e iTX | p5q Dlx 2301 BIOS
Cooling Custom Water | D-14 & HR-03gt | Passive HSF
Memory Samsung MV-3V4G3D 4g x 2 @ 1866 1.35v | OcZ RpR 2g x 4 @ 1067 2.2v
Video Card(s) MSi 7950 tf3 @1000 / 1350 | Asus 5870 V2 @ 900 / 1275
Storage Adata sx900 256Gb / WD 2500 HHTZ | WD 1001 FALS x 2
Display(s) BenQ gw2750hm | 46" Sharp Quatron
Case BitFenix Prodigy - m0dd3d | Antec Fusion Remote MAX
Audio Device(s) Onboard Toslink > Yamaha HTR 6290 | Xonar HDAV1.3 > Yamaha DSP z7
Power Supply Ocz mXp700w | Ocz zx850w | Cannakit 5v 2.5a
Mouse Logitech G700s | Logitech G9x - Cable Repaired
Keyboard TT Meka G1 - Black w Cherry Blacks| Logitech G11
Software Win7 Home | Xp sp3 & Vista ultimate | Raspbian
Benchmark Scores Epeen!! Who needs epeen??
:laugh: Ya think? :roll:

No. It's too complicated :laugh:

Obviously the CPU gets done when swapping but GFX as soon as the anti static wrapper is off, so is the cooler! :twitch:
 
Joined
Jun 27, 2011
Messages
6,680 (1.43/day)
Processor 7800x3d
Motherboard Gigabyte B650 Auros Elite AX
Cooling Custom Water
Memory GSKILL 2x16gb 6000mhz Cas 30 with custom timings
Video Card(s) MSI RX 6750 XT MECH 2X 12G OC
Storage Adata SX8200 1tb with Windows, Samsung 990 Pro 2tb with games
Display(s) HP Omen 27q QHD 165hz
Case ThermalTake P3
Power Supply SuperFlower Leadex Titanium
Software Windows 11 64 Bit
Benchmark Scores CB23: 1811 / 19424 CB24: 1136 / 7687
mx-2 claims to last up to 8 years
 
Joined
Sep 20, 2011
Messages
527 (0.12/day)
Location
somewhere in Eastern Europe
System Name Cruncher
Processor AMD FX-8370
Motherboard Asus Crosshair V Formula
Cooling Thermalright Silver Arrow SB-E
Memory 2x4 GB Corsair XMS3 2000
Video Card(s) Sapphire HD7870+Powercolor HD7850 CrossFire
Storage Corsair ForceGT 90 SSD,WD Black 500
Display(s) Acer 24'' 2ms
Case Cooler Master HAF 932
Audio Device(s) onboard
Power Supply Thermaltake Grand 1050w 80+Gold
Software Win 7 SP1 Ult x64
Joined
Jan 2, 2009
Messages
9,899 (1.78/day)
Location
Essex, England
System Name My pc
Processor Ryzen 5 3600
Motherboard Asus Rog b450-f
Cooling Cooler master 120mm aio
Memory 16gb ddr4 3200mhz
Video Card(s) MSI Ventus 3x 3070
Storage 2tb intel nvme and 2tb generic ssd
Display(s) Generic dell 1080p overclocked to 75hz
Case Phanteks enthoo
Power Supply 650w of borderline fire hazard
Mouse Some wierd Chinese vertical mouse
Keyboard Generic mechanical keyboard
Software Windows ten
I'm curious. If this is a major issue, does it affect white box systems and pre-applied heatsinks (e.g. most GPUs)?

Yup, I'm sure everyone's heard of the 360 ring of death.

That's caused initially by the paste being to thick/drying up which causes load temperatures to go up which makes the lead free solder melt and break the damn thing :laugh:
 

fullinfusion

Vanguard Beta Tester
Joined
Jan 11, 2008
Messages
9,909 (1.67/day)
Nice read there BB :toast:
you have a problem with TP and I have a hose problem. Seems it shrinks a tad and gets a bit harder and alowing air to enter the system..
 
Joined
Dec 16, 2010
Messages
1,662 (0.34/day)
Location
State College, PA, US
System Name My Surround PC
Processor AMD Ryzen 9 7950X3D
Motherboard ASUS STRIX X670E-F
Cooling Swiftech MCP35X / EK Quantum CPU / Alphacool GPU / XSPC 480mm w/ Corsair Fans
Memory 96GB (2 x 48 GB) G.Skill DDR5-6000 CL30
Video Card(s) MSI NVIDIA GeForce RTX 4090 Suprim X 24GB
Storage WD SN850 2TB, 2 x 512GB Samsung PM981a, 4 x 4TB HGST NAS HDD for Windows Storage Spaces
Display(s) 2 x Viotek GFI27QXA 27" 4K 120Hz + LG UH850 4K 60Hz + HMD
Case NZXT Source 530
Audio Device(s) Sony MDR-7506 / Logitech Z-5500 5.1
Power Supply Corsair RM1000x 1 kW
Mouse Patriot Viper V560
Keyboard Corsair K100
VR HMD HP Reverb G2
Software Windows 11 Pro x64
Benchmark Scores Mellanox ConnectX-3 10 Gb/s Fiber Network Card
Yup, I'm sure everyone's heard of the 360 ring of death.

That's caused initially by the paste being to thick/drying up which causes load temperatures to go up which makes the lead free solder melt and break the damn thing :laugh:

I didn't realize that. I just thought that the heatsinks were inadequately sized for the system and that's what caused it to run hot and damage the solder.
 
Joined
Jan 2, 2009
Messages
9,899 (1.78/day)
Location
Essex, England
System Name My pc
Processor Ryzen 5 3600
Motherboard Asus Rog b450-f
Cooling Cooler master 120mm aio
Memory 16gb ddr4 3200mhz
Video Card(s) MSI Ventus 3x 3070
Storage 2tb intel nvme and 2tb generic ssd
Display(s) Generic dell 1080p overclocked to 75hz
Case Phanteks enthoo
Power Supply 650w of borderline fire hazard
Mouse Some wierd Chinese vertical mouse
Keyboard Generic mechanical keyboard
Software Windows ten
I didn't realize that. I just thought that the heatsinks were inadequately sized for the system and that's what caused it to run hot and damage the solder.
The Heat sinks are just about enough for the job, but that's why it all goes so wrong when the TIM goes bad or wasn't applied correctly in the first instance.

I Don't know why they use that crappy cement like TIM, it's always drys out way to fast. A lot of GPU companies use this crappy TIM as well.. or used to anyways.
 
Joined
Oct 5, 2010
Messages
861 (0.17/day)
System Name FragBox
Processor Intel Core i7 2600K @ 5.0GHz/1.45 volts
Motherboard Asus P8Z77 WS
Cooling Custom CPU loop
Memory Kingston 12GB DDR3 1600
Video Card(s) Galaxy GTX 680/Zotac GTX 680 in SLi/EVGA GTX 650Ti
Storage 2 Vertex 3 120's, raid 0, 2 Seagate Momentus XT 500GB's in raid 0, 1 Hitatchi 2TB for backup
Display(s) 3 Acer S232HLX2 in nvidia surround
Case Corsair C70 White
Audio Device(s) Onboard
Power Supply Corsair AX1200
Software Win 7 x64 Pro
The Heat sinks are just about enough for the job, but that's why it all goes so wrong when the TIM goes bad or wasn't applied correctly in the first instance.

I Don't know why they use that crappy cement like TIM, it's always drys out way to fast. A lot of GPU companies use this crappy TIM as well.. or used to anyways.

Still do, I re-timed my zotac 680, and it was flaking off.
 
Top