- Joined
- Mar 7, 2007
- Messages
- 3,842 (0.62/day)
- Location
- Maryland
System Name | HAL |
---|---|
Processor | Core i9 13900k @5.8-6.1 |
Motherboard | Z790 Arous master |
Cooling | EKWB Quantum Velocity V2 & (2) 360 Corsair XR7 Rads push/pull |
Memory | 2x 32GB (64GB) Gskill trident 6000 CL30 @28 1T |
Video Card(s) | RTX 4090 Gigagbyte gaming OC @ +200/1300 |
Storage | (M2's) 2x Samsung 980 pro 2TB, 1xWD Black 2TB, 1x SK Hynix Platinum P41 2TB |
Display(s) | 65" LG OLED 120HZ |
Case | Lian Li dyanmic Evo11 with distro plate |
Power Supply | Thermaltake 1350 |
Software | Microsoft Windows 11 x64 |
( Done now, need no advice)
I have been given some very good information so far about these things I think.
I'm not messing with any of the things that are supposed to increase longevity or anything.
I am enabling AHCI mode in bios.. But enable it in UEFI? Idk that one.. XD
I'll also disable scheduled defrag from inside windows I guess, from inside defrag I assume.
I see a bunch of places I can enable AHCI in bios though.. I enabled it only on the sata 3 port my ssd is attached to.
is that right?
What I did though so far is a standard install of the OS to the SSD.
My 1 TB still has the OS on it as well.. I wonder if I can access both, if both are plugged in..
Likely have to boot individually from both storage units I guess.
Glad my g/f believes in laptops..lol.. That's what I'm on right now..
Thanks yas.
I enabled the option for sata mode in bios on the x58 gigabyte mobo, the top option.. I got this message.. bios not up to date?
I didn't get this message when I just had AHCI enabled on the sata port my SSD is attached to..
Should I be changing ICH SATA control mode to AHCI from IDE? If I do, I get that error message..
I have been given some very good information so far about these things I think.
I'm not messing with any of the things that are supposed to increase longevity or anything.
I am enabling AHCI mode in bios.. But enable it in UEFI? Idk that one.. XD
I'll also disable scheduled defrag from inside windows I guess, from inside defrag I assume.
I see a bunch of places I can enable AHCI in bios though.. I enabled it only on the sata 3 port my ssd is attached to.
is that right?
What I did though so far is a standard install of the OS to the SSD.
My 1 TB still has the OS on it as well.. I wonder if I can access both, if both are plugged in..
Likely have to boot individually from both storage units I guess.
Glad my g/f believes in laptops..lol.. That's what I'm on right now..
Thanks yas.
I enabled the option for sata mode in bios on the x58 gigabyte mobo, the top option.. I got this message.. bios not up to date?
I didn't get this message when I just had AHCI enabled on the sata port my SSD is attached to..
Should I be changing ICH SATA control mode to AHCI from IDE? If I do, I get that error message..
Attachments
Last edited: