New i5 or just mobo?

[fango]

I would like to upgrade mbo & processor, at first I thought just for the ssd reason, but since mbo is sata II I'm not sure that's wise at the moment. I stuck on a processor really since i5 3570 is way too expensive (or at least 2500), and if I get the new i3 it is really downgrade in comparison with the present i5 750, or should I just replace the plate?, any advice? .. thank you!


Gigabyte GA-P55-UD3R
QuadCore Intel Core i5 750, 3116 MHz
Corsair XMS3 CM3X2G1333C9 2x2GB
NVIDIA GeForce GTX 560
Corsair VX550W

 

[eidairaman1]

thats intel for you. But Honestly what is your purpose for upgrading this time?

Your CPU in Turbo should operate at 3.2GHz and normally at 2.4GHz, and I believe that is a S Model CPU you have there

 

[bogmali]

You can still run Intel's RST in that setup using an SSD. i3 even the Ivy Bridge variant is not better compared to that 750 for what you're intentions are. Just keep that setup, it's more than sufficient.

 

[fango]

thats intel for you. But Honestly what is your purpose for upgrading this time?

.. sata III mbo, Gigabyte 1155 series - as I mentioned, upgrading to ssd, and when I do that, processor need to go also ..

 

[eidairaman1]

You can still run Intel's RST in that setup using an SSD. i3 even the Ivy Bridge variant is not better compared to that 750 for what you're intentions are. Just keep that setup, it's more than sufficient.

I agree with you dude. People are still running machines with skt 1366 core i7 920 processor.

To OP you can overclock that CPU beyond turbo speed if you have the proper cooling for it and i dont mean the stock heatsink, it will be FSB only since the multiplier is locked from going higher.

Honestly 1366, 1156, AM2+, AM3 are still capable and pretty fast today. Honestly Id wait 1 to 2 more gens before a upgrade is really needed.

Also You dont need SATA 3 to run SSDs either as SATA II isnt saturated.

My Bros Machine with a PH II 555 BE unlocked to 955 BE with a 970 board and a Seagate 7200.12 drive boots in less than a minute using windows 7 Home Premium. The machine is over a year old now but its as fast as it was when i powered it up the first time.

 

[hat]

Actually SATA II can get saturated by today's SSDs... though even on SATA I an SSD is faster than a spinner any day of the year, including leap years.

 

[fango]

Also You dont need SATA 3 to run SSDs either as SATA II isnt saturated.

I know, ssd will work on sata II, but limited on sata II speed

 

[hat]

SSDs really shine because of their access time (.1ms vs ~15ms on a spinner) and their random 4k read/write speeds, which are over 20MB/s where a spinner struggles to get 1MB/s. I doubt going from SATA II to SATA III would help much, the benefits are already there.

 

[Jetster]

I know, ssd will work on sata II, but limited on sata II speed

It will still be way faster then a platter drive. I say go for it

Then wait till you have the cash for a proper upgrade

 

[fango]

Ok then, I'll keep this configuration for sometime + ssd upgrade


thanks for advices!

 

[eidairaman1]

SSDs really shine because of their access time (.1ms vs ~15ms on a spinner) and their random 4k read/write speeds, which are over 20MB/s where a spinner struggles to get 1MB/s. I doubt going from SATA II to SATA III would help much, the benefits are already there.

considering even a Pentium 2,3,4 or AMD K6, K7, K8 would definitely benefit from such a drive

 

[Jetster]

I have a SSD in my HTPC that is only SATA II and it boots in 42 sec

 

[eidairaman1]

I have a SSD in my HTPC that is only SATA II and it boots in 42 sec

ya that HTPC of yours is comparable to his pc.