- Joined
- Nov 9, 2011
- Messages
- 407 (0.09/day)
System Name | ChaoticG8R / Lil'G8R |
---|---|
Processor | Intel i7-970 / Intel i7-4790K |
Motherboard | ASUS Sabertooth X58 / ASUS ROG Impact VII Z97 |
Cooling | Swiftech H220 AIO / Cooler Master Nepton 140XL |
Memory | Mushkin Enh. Radioactive 3x4GB DDR3 1600 / Corsair Vengeance 2x8GB DDR3 2133 |
Video Card(s) | 2 x EVGA GTX 680 4GB / Zotac AMP! GTX 980 |
Storage | 240GB Crucial M500 + RAID1 2x2TB WD BlackCaviar / Raid0 3x256 GB Crucial MX100 + 2TB WD BlackCaviar |
Display(s) | QNIX QX2710 @ 120hz + 2x Sceptre 20" |
Case | Cooler Master Storm Sniper Black Edition / Thermaltake Core V1 |
Power Supply | BFG LS1200 1250W / Corsair AX860i 860W |
Mouse | ROCCAT Kone XTD |
Keyboard | ROCCAT Ryos MK Pro |
Benchmark Scores | Runs daily @ 4.5Ghz; Runs stable @ 4.8Ghz; Max OC on air: 5.0Ghz |
Budget: Any (without customization required, like Newegg/NCIX etc supplied, not some custom deal from DangerDen or anything)
Form Factor: ATX, preferentially Mid to large Mid (wants to avoid Full towers if possible)
Goal: Full WC build. Visible guts: Wants the WC to look nice and be visible
Current components: i7-3930k, ASUS P9X79 Deluxe, Ripjaw 4x8GB 2133 RAM, EVGA Signature GTX 690, XPSC Raystorm + Razor 690.
This will be a new build for a first time WC'er. Kit will likely be custom, so radiator dimensions/etc are currently unavailable for your recommendations. He currently has a first-gen core series system in a 600T, and is upgrading to an Sandy-E system. He wants to go "all-out" (within reason) with this build, WC will likely involve2 GFX (1 GTX 690), 1 CPU, with the possibility of RAM/Northbridge (he likes the idea/look, even if it provides low functionality). There will probably be a second thread dedicated to cooling recommendations later as more of the hard components are assembled, but if you wish to add those along with your case selection, feel free!
So I would greatly appreciate your recommendations. I immediately said Switch 810 but he was worried about the size being too big (it's not off the table but would like more options). Please also don't just say a case, please attempt to give a pro/con to your selection, especially if they are against the initial requests (size/etc). Thanks so much everyone!!
Form Factor: ATX, preferentially Mid to large Mid (wants to avoid Full towers if possible)
Goal: Full WC build. Visible guts: Wants the WC to look nice and be visible
Current components: i7-3930k, ASUS P9X79 Deluxe, Ripjaw 4x8GB 2133 RAM, EVGA Signature GTX 690, XPSC Raystorm + Razor 690.
This will be a new build for a first time WC'er. Kit will likely be custom, so radiator dimensions/etc are currently unavailable for your recommendations. He currently has a first-gen core series system in a 600T, and is upgrading to an Sandy-E system. He wants to go "all-out" (within reason) with this build, WC will likely involve
So I would greatly appreciate your recommendations. I immediately said Switch 810 but he was worried about the size being too big (it's not off the table but would like more options). Please also don't just say a case, please attempt to give a pro/con to your selection, especially if they are against the initial requests (size/etc). Thanks so much everyone!!
If you feel this makes a huge difference, please provide your case selections for these options with said note.I would find out if you are going to be buying a triple rad or a pair of dual rads first. It will make a huge difference on case recommendations.
Last edited: