Vddc

[Vaultekk]

please

on left up vddc? it is problem? It varies a lot in what could be the problem.. Please help

 

[brandonwh64]

Looks fine. What card is this?

 

[Vaultekk]

it is 7950 3 gb Gigabyte and i have problem you can help me pleasse

 

[RCoon]

please http://gpuz.techpowerup.com/12/12/03/hc8.png on left up vddc? it is problem? It varies a lot in what could be the problem.. Please help

default mvddc is 1.5, seems ok to me, many people have it at 1.6

 

[manofthem]

So what's the problem?

 

[brandonwh64]

What is the exact problem? VDDC is probably low due to the card being at idle state.

 

[RCoon]

Your card is fine, it's idle. AMD Zero Core is pretty cool guy

 

[Vaultekk]

this is the second card, and the same problem in the game artifacts and occasional fluctuations vddc when i play

 

[brandonwh64]

What PSU do you have?

 

[Vaultekk]

i can make screenshot when i playing

 

[Vaultekk]

Seasonic m12II-750 BRONZE please i really need help

 

[brandonwh64]

Seasonic m12II-750 BRONZE

ok have you tried to use MSI afterburner and adjust the voltage up alittle to see if that helps the artifacts?

 

[Vaultekk]

I have not tried the program with experience but sometimes I go to download it vddc 127a has a lot of play when it fluctuates

 

[Vaultekk]

please how should I set it up correctly voltage. I am a llama

 

[RCoon]

I am a llama

You are my hero. Knock your mvddc to 1.6 and vddc at 1.1v

 

[Vaultekk]

how? When the PC is at rest so vddc varies 1.8a, 2.5a 2.0a 2.8a it is normal?

 

[RCoon]

how? When the PC is at rest so vddc varies 1.8a, 2.5a 2.0a 2.8a it is normal?

download Trixx, and enabled custom voltage

 

[Vaultekk]

I downloaded afterburner is it enough?

 

[Vaultekk]

What should I change in Afterburner is a core voltage (mV) and power limit%

 

[Vaultekk]

Please, please I'm desperate, I downloaded Trixx
I know how i can change vddc in default is 1093, but how change mvddc?

 

[cadaveca]

I have the same card, what you see is normal. Even 7970 uses 0.85V for desktop.


under load, it should vary a fair bit. If you are getting artifacts or crashing, try the latest driver, and if that fails, then it is time to try replacing the card.

VDDC is only default 1.090V when second monitor is connected, BTW. Connect second monitor, and you will see that 1.09V in 3D(although it will droop a bit).


Actaul single-monitor 3D voltage is 0.95V.


NOTHING IS WRONG OTHER THAN THE ISSUES, which to me would indicate a faulty card.

 

[RCoon]

Please, please I'm desperate, I downloaded Trixx
I know how i can change vddc in default is 1093, but how change mvddc?

1.5 is just fine, increase the voltage on the core by tiny amounts (1.000 - 1.100) and see if the situation improves, but not too much. Other than that, could be faulty and RMA TIME!!!!

 

[EarthDog]

I have the same card, what you see is normal. Even 7970 uses 0.85V for desktop.


under load, it should vary a fair bit. If you are getting artifacts or crashing, try the latest driver, and if that fails, then it is time to try replacing the card.

THIS.

And get off the amperage and just look at the voltage.

.850 is normal for idle. Play a game and come back, your max should be around .950. Memory I believe should be around 1.5v.

 

[cadaveca]

THIS.

And get off the amperage and just look at the voltage.

.850 is normal for idle. Play a game and come back, your max should be around 1.1 to 1.25v. Memory I believe should be around 1.5v.

0.95V 3d load for that card. 1.1 V or 1.25V is far too high. I have both retail card and ES sample, both are the same.

I run my ES card with 7970 BIOS...THAT BIOS is 1.1 V on load, 1.170 V with dual monitor.

 

[Vaultekk]

this is normal? this is when i play Far cry 3 and this is the same problem with the same second card