• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

Unusual Memtest error

sneekypeet

Retired Super Moderator
Joined
Apr 12, 2006
Messages
29,407 (4.48/day)
System Name EVA-01
Processor Intel i7 13700K
Motherboard Asus ROG Maximus Z690 HERO EVA Edition
Cooling ASUS ROG Ryujin III 360 with Noctua Industrial Fans
Memory PAtriot Viper Elite RGB 96GB @ 6000MHz.
Video Card(s) Asus ROG Strix GeForce RTX 3090 24GB OC EVA Edition
Storage Addlink S95 M.2 PCIe GEN 4x4 2TB
Display(s) Asus ROG SWIFT OLED PG42UQ
Case Thermaltake Core P3 TG
Audio Device(s) Realtek on board > Sony Receiver > Cerwin Vegas
Power Supply be quiet DARK POWER PRO 12 1500W
Mouse ROG STRIX Impact Electro Punk
Keyboard ROG STRIX Scope TKL Electro Punk
Software Windows 11
So I just slapped in a kit of Gskill TridentX 2666 11-13-13-35 into the MVE. Cleared CMOS and all that jazz, got back in bios and set the XMP #1 @2667.

That profile fails with the DIMM set to 1.65V in bios, 1.67V actual, and with the recommended VCCIO of 1.25V manually set delivering 1.27V actual.

So I swapped over to profile #2 @ 2665, all the rest looks the same on paper. I was able to run memtest just over 30 minutes and I ran across an error I had never seen on any kit of ram I have abused.

If you have ideas of what it stems from or how to correct it, I am all ears (well eyes really:p )



 

cadaveca

My name is Dave
Joined
Apr 10, 2006
Messages
17,232 (2.63/day)
Don't adjust VCCIO/VTT or VCCSA/IMC. Both are fine at stock, 1.05 V for VTT, 0.925 V for VCCSA. Don't let anyone tell you any different. G.skill tests all kits with those voltages, recommended voltages in XMP profiles are for other platforms.


My kit works fine on MVE. IF yours does not, it's CPU, and voltage ain't gonna HELP YOU THERE.


Also, note that XMP profile and ASUS settings for secondary and tertiary are not the same. Try setting TWCL and such to same setting as in XMP.




I have more tips, let's start with those.

drop some screens of your BIOS settings. ;)
 

sneekypeet

Retired Super Moderator
Joined
Apr 12, 2006
Messages
29,407 (4.48/day)
System Name EVA-01
Processor Intel i7 13700K
Motherboard Asus ROG Maximus Z690 HERO EVA Edition
Cooling ASUS ROG Ryujin III 360 with Noctua Industrial Fans
Memory PAtriot Viper Elite RGB 96GB @ 6000MHz.
Video Card(s) Asus ROG Strix GeForce RTX 3090 24GB OC EVA Edition
Storage Addlink S95 M.2 PCIe GEN 4x4 2TB
Display(s) Asus ROG SWIFT OLED PG42UQ
Case Thermaltake Core P3 TG
Audio Device(s) Realtek on board > Sony Receiver > Cerwin Vegas
Power Supply be quiet DARK POWER PRO 12 1500W
Mouse ROG STRIX Impact Electro Punk
Keyboard ROG STRIX Scope TKL Electro Punk
Software Windows 11
off to try this...

Setting XMP with defaults leads to a post code of 23 and no boot, no beep.
Also the XMP profile shows 1.65V /1.25V in the profile :confused:

One last question...bmp save files are too large, how do I shrink them to get tpu.org to host without going smaller in pixels?
 
Last edited:

cadaveca

My name is Dave
Joined
Apr 10, 2006
Messages
17,232 (2.63/day)
off to try this...

Setting XMP with defaults leads to a post code of 23 and no boot, no beep.
Also the XMP profile shows 1.65V /1.25V in the profile :confused:

I could post a screenshot of G.Skill telling me what I've told you, but I won't. I don't care what the profile reads. :p Corsair programs 1.4 V into theirs...go ahead and try that. :p

Voltage adjust is for X79. VTT doesn't affect ram clocking. VTT is BCLK on SB/SB-E/IVB.

Is PLL overvolt enabled? If no, then enable.


You had issues with the Corsair sticks @ 2666, right? These G.skills are basically the same stick. If you couldn't run the Corsairs, these aren't going to be any better.

Let me know about PLL Overvolt...this is used to correct "23" if possible. To me, this is a sign your CPU is not capable of running that divider, simply can bench it only.

I have these sticks, that board, same CPU, I've done most my testing for my review... IF you gotta work for it....usually you are wasting your time. Benching...that's a different story. If you want to go down the old road of running the Redlines @ C6 again, after I told ya not to, be my guest. Just keep in mind how well that went last time.:roll:

adjust screenshots in paint, or "save for web" in PS.

You should be able to set 11-14-14-35, 1.7V, and boot 2800 MHz. IF no boot, your CPU IMC is crap. If that's the case, I'd say 2400 MHz max for your CPU, 2666 MHZ benching only...just like those Corsairs...go figure...:p
 
Last edited:

sneekypeet

Retired Super Moderator
Joined
Apr 12, 2006
Messages
29,407 (4.48/day)
System Name EVA-01
Processor Intel i7 13700K
Motherboard Asus ROG Maximus Z690 HERO EVA Edition
Cooling ASUS ROG Ryujin III 360 with Noctua Industrial Fans
Memory PAtriot Viper Elite RGB 96GB @ 6000MHz.
Video Card(s) Asus ROG Strix GeForce RTX 3090 24GB OC EVA Edition
Storage Addlink S95 M.2 PCIe GEN 4x4 2TB
Display(s) Asus ROG SWIFT OLED PG42UQ
Case Thermaltake Core P3 TG
Audio Device(s) Realtek on board > Sony Receiver > Cerwin Vegas
Power Supply be quiet DARK POWER PRO 12 1500W
Mouse ROG STRIX Impact Electro Punk
Keyboard ROG STRIX Scope TKL Electro Punk
Software Windows 11
Enabling PLL overvoltage doesnt correct the error, yes i had similar on the Plats and I grabbed these to sort of it was those or the CPU.

CPU will push 2600 without issue, just 2666 is a bit flaky so far.
 

Athlon2K15

HyperVtX™
Joined
Sep 27, 2006
Messages
7,909 (1.24/day)
Location
O-H-I-O
Processor Intel Core i9 11900K
Motherboard MSI Z590 Carbon EK X
Cooling Custom Water
Memory Team DDR4 4000MHz
Video Card(s) ASUS TUF RTX 3080 OC
Storage WD WN850 1TB
Display(s) 43" LG NanoCell 4K 120Hz
Power Supply Asus Thor 1200w
Mouse Asus Strix Evolve
Keyboard Asus Strix Claymore
Enabling PLL overvoltage doesnt correct the error, yes i had similar on the Plats and I grabbed these to sort of it was those or the CPU.

resize in windas paint
 

cadaveca

My name is Dave
Joined
Apr 10, 2006
Messages
17,232 (2.63/day)
Enabling PLL overvoltage doesnt correct the error, yes i had similar on the Plats and I grabbed these to sort of it was those or the CPU.

Don't bother wasting your time, it's the CPU. Code "23" is the key..."55" you can fix...


"23" = Buy new CPU.

:laugh:

You cannot boot 2800 MHz...and these G.skill kits are capable of 3000 MHz with the right CPU.

CPU will push 2600 without issue, just 2666 is a bit flaky so far.

Even my 3570K will do 2666 MHz with ease, with both these and the Corsair sticks. NO voltage adjustments are needed. IF 2666 is flaky, for sure it's CPU.
 

sneekypeet

Retired Super Moderator
Joined
Apr 12, 2006
Messages
29,407 (4.48/day)
System Name EVA-01
Processor Intel i7 13700K
Motherboard Asus ROG Maximus Z690 HERO EVA Edition
Cooling ASUS ROG Ryujin III 360 with Noctua Industrial Fans
Memory PAtriot Viper Elite RGB 96GB @ 6000MHz.
Video Card(s) Asus ROG Strix GeForce RTX 3090 24GB OC EVA Edition
Storage Addlink S95 M.2 PCIe GEN 4x4 2TB
Display(s) Asus ROG SWIFT OLED PG42UQ
Case Thermaltake Core P3 TG
Audio Device(s) Realtek on board > Sony Receiver > Cerwin Vegas
Power Supply be quiet DARK POWER PRO 12 1500W
Mouse ROG STRIX Impact Electro Punk
Keyboard ROG STRIX Scope TKL Electro Punk
Software Windows 11
this is the sort of info I really needed. I dont mind settling for 2666, but I had to be sure it was the CPU before i went barking to Corsair to see why those didnt go.

Can't beat it really, breakfast at Denny's for three and a few dollars and I came home from Vegas with it. Now off to look for a CPU i guess.

Let me ask this....Is the IMC on the 3770K that much better, or did I just get my usual poop chip?
 
Joined
Jul 19, 2006
Messages
43,585 (6.74/day)
Processor AMD Ryzen 7 7800X3D
Motherboard ASUS TUF x670e
Cooling EK AIO 360. Phantek T30 fans.
Memory 32GB G.Skill 6000Mhz
Video Card(s) Asus RTX 4090
Storage WD m.2
Display(s) LG C2 Evo OLED 42"
Case Lian Li PC 011 Dynamic Evo
Audio Device(s) Topping E70 DAC, SMSL SP200 Headphone Amp.
Power Supply FSP Hydro Ti PRO 1000W
Mouse Razer Basilisk V3 Pro
Keyboard Tester84
Software Windows 11
23 = Adjust your 3rd set of timings.

I had this issue when OC'ing some sticks

Try these settings in your 3rd timings:

tRWDR = 4
tRWSR = 4
tRRSR = 4
tWWSR = 4
 

sneekypeet

Retired Super Moderator
Joined
Apr 12, 2006
Messages
29,407 (4.48/day)
System Name EVA-01
Processor Intel i7 13700K
Motherboard Asus ROG Maximus Z690 HERO EVA Edition
Cooling ASUS ROG Ryujin III 360 with Noctua Industrial Fans
Memory PAtriot Viper Elite RGB 96GB @ 6000MHz.
Video Card(s) Asus ROG Strix GeForce RTX 3090 24GB OC EVA Edition
Storage Addlink S95 M.2 PCIe GEN 4x4 2TB
Display(s) Asus ROG SWIFT OLED PG42UQ
Case Thermaltake Core P3 TG
Audio Device(s) Realtek on board > Sony Receiver > Cerwin Vegas
Power Supply be quiet DARK POWER PRO 12 1500W
Mouse ROG STRIX Impact Electro Punk
Keyboard ROG STRIX Scope TKL Electro Punk
Software Windows 11
2800 is a no go....looking into rockers tip for a second.
 

cadaveca

My name is Dave
Joined
Apr 10, 2006
Messages
17,232 (2.63/day)
this is the sort of info I really needed. I dont mind settling for 2666, but I had to be sure it was the CPU before i went barking to Corsair to see why those didnt go.

Can't beat it really, breakfast at Denny's for three and a few dollars and I came home from Vegas with it. Now off to look for a CPU i guess.

Let me ask this....Is the IMC on the 3770K that much better, or did I just get my usual poop chip?

You have ES chip, right? That says it all.


Yes, 3770K should have better IMC on average than 3570k. On average. For me, both are the same, 3770k can boot higher, but no 3000 MHz...I can boot 2800 MHz no problem, but benching only.


Testing max mem divider is easy. It's simply a matter of if it boots or not. The Highest for boot is usually not stable, and bench only, one lower for max 24/7 stable.


PLL overvolt is used when divider won't boot up...not for multis like on SB...IVB is a very different chip.

23 = Adjust your 3rd set of timings.

I had this issue when OC'ing some sticks

Try these settings in your 3rd timings:

tRWDR = 4
tRWSR = 4
tRRSR = 4
tWWSR = 4

I don't agree. When you set those to those settings is lowers the load on IMC. You're simply faking it, doing that, and the bandwidth will show it. ASUS already uses far relaxed timings...you either run without manual adjustments, or you get crap performance. It can help push some DIMMs to speeds they shouldn't run, but won't help with IMC. "23" is IMC problem, not timings.
 

sneekypeet

Retired Super Moderator
Joined
Apr 12, 2006
Messages
29,407 (4.48/day)
System Name EVA-01
Processor Intel i7 13700K
Motherboard Asus ROG Maximus Z690 HERO EVA Edition
Cooling ASUS ROG Ryujin III 360 with Noctua Industrial Fans
Memory PAtriot Viper Elite RGB 96GB @ 6000MHz.
Video Card(s) Asus ROG Strix GeForce RTX 3090 24GB OC EVA Edition
Storage Addlink S95 M.2 PCIe GEN 4x4 2TB
Display(s) Asus ROG SWIFT OLED PG42UQ
Case Thermaltake Core P3 TG
Audio Device(s) Realtek on board > Sony Receiver > Cerwin Vegas
Power Supply be quiet DARK POWER PRO 12 1500W
Mouse ROG STRIX Impact Electro Punk
Keyboard ROG STRIX Scope TKL Electro Punk
Software Windows 11
Not an ES, retail, just no box.

As for the timings, it didn't work, thanks anyways erocker.
 
Joined
Jul 19, 2006
Messages
43,585 (6.74/day)
Processor AMD Ryzen 7 7800X3D
Motherboard ASUS TUF x670e
Cooling EK AIO 360. Phantek T30 fans.
Memory 32GB G.Skill 6000Mhz
Video Card(s) Asus RTX 4090
Storage WD m.2
Display(s) LG C2 Evo OLED 42"
Case Lian Li PC 011 Dynamic Evo
Audio Device(s) Topping E70 DAC, SMSL SP200 Headphone Amp.
Power Supply FSP Hydro Ti PRO 1000W
Mouse Razer Basilisk V3 Pro
Keyboard Tester84
Software Windows 11
Bummer. :(

Can you post a bios shot of your 3rd timings so I can compare it to mine? This has worked for my old AsRock board (which didn't OC RAM worth a stink since I changed them) and my MV5. :)
 

cadaveca

My name is Dave
Joined
Apr 10, 2006
Messages
17,232 (2.63/day)
Not an ES, retail, just no box.

Must be an early chip, or run under cold before you got it, IMHO.

Bummer. :(

Can you post a bios shot of your 3rd timings so I can compare it to mine? This has worked for my old AsRock board (which didn't OC RAM worth a stink since I changed them) and my MV5. :)

Sure, but you're going off of info used for clocking or benchmarking, not running stock. These sticks should simply work, without any intervention other than enabling XMP. All those actual settings are easily set properly using the profiles that are provided for IC type at the top of the Memory timings page, and the latency boundry setting on the MVE.

I've taken the time to adjust each setting one by one, and test each.

For those sticks:

trrdr = 3
trrdd = 3
twwdr = 4
twwdd = 4
trwdr = 5
trrsr = 5
twrdr = 1
twwsr = 7
trwsr = 5

You can tweak latency boundry all the way down to 4 or 5, it will adjust all these for you. The Corsairs need 6 to 7 for latency boundry (since they are binned with alternate secondary timings).
 
Last edited:

sneekypeet

Retired Super Moderator
Joined
Apr 12, 2006
Messages
29,407 (4.48/day)
System Name EVA-01
Processor Intel i7 13700K
Motherboard Asus ROG Maximus Z690 HERO EVA Edition
Cooling ASUS ROG Ryujin III 360 with Noctua Industrial Fans
Memory PAtriot Viper Elite RGB 96GB @ 6000MHz.
Video Card(s) Asus ROG Strix GeForce RTX 3090 24GB OC EVA Edition
Storage Addlink S95 M.2 PCIe GEN 4x4 2TB
Display(s) Asus ROG SWIFT OLED PG42UQ
Case Thermaltake Core P3 TG
Audio Device(s) Realtek on board > Sony Receiver > Cerwin Vegas
Power Supply be quiet DARK POWER PRO 12 1500W
Mouse ROG STRIX Impact Electro Punk
Keyboard ROG STRIX Scope TKL Electro Punk
Software Windows 11
May be early, going to look and see if I took an image that is readable of the IHS.


Bios Shots:












 
Joined
Jul 19, 2006
Messages
43,585 (6.74/day)
Processor AMD Ryzen 7 7800X3D
Motherboard ASUS TUF x670e
Cooling EK AIO 360. Phantek T30 fans.
Memory 32GB G.Skill 6000Mhz
Video Card(s) Asus RTX 4090
Storage WD m.2
Display(s) LG C2 Evo OLED 42"
Case Lian Li PC 011 Dynamic Evo
Audio Device(s) Topping E70 DAC, SMSL SP200 Headphone Amp.
Power Supply FSP Hydro Ti PRO 1000W
Mouse Razer Basilisk V3 Pro
Keyboard Tester84
Software Windows 11
Sure, but you're going off of info used for clocking or benchmarking, not running stock. These sticks should simply work, without any intervention other than enabling XMP.

Nope. I'm going off info I got from ASUS in regards to running my 2133Mhz RAM at stock. This also worked for my 2500K (which has a dud of a IMC) for running any kind of sticks (OC'd or not) past 1866Mhz.
 

cadaveca

My name is Dave
Joined
Apr 10, 2006
Messages
17,232 (2.63/day)
Nope. I'm going off info I got from ASUS in regards to running my 2133Mhz RAM at stock. This also worked for my 2500K (which has a dud of a IMC) for running any kind of sticks (OC'd or not) past 1866Mhz.

I have the guide that info is based off of. It's for clocking and not 24/7, trust me.

It's very simple stuff, really, no mystery here other than the ones perpetuated by those that run LN2, and keep their tweaks hidden from the public. ASUS has even opened all that up with the Latency boundry setting and the IC profiles, since tertiaries do have a set formula based on IC type. Only max clock settings will adjust tertiaries in that way. Anyone with one of these boards can change the settings and see for themselves.

Peet, you posted JEDEC settings on those screenshot. :p get that 2666 booted, then show the screenshot, you'll have far different secondaries and tertiaries listed. I already posted the tertiaries, however. ;)

The difference I have in my tool belt is that I know many of these listed settings are something that is onbly present on ASUS boards, since they name things odd, as can be seen by comparing listings in the SPD tool, and what they give in BIOS..what's in BIOS doesn't translate directly unless you "know the code". That's how stupid all of this really is. Why the fuck didn't they use the same labels? To keep out the noobs. :p
 
Last edited:

sneekypeet

Retired Super Moderator
Joined
Apr 12, 2006
Messages
29,407 (4.48/day)
System Name EVA-01
Processor Intel i7 13700K
Motherboard Asus ROG Maximus Z690 HERO EVA Edition
Cooling ASUS ROG Ryujin III 360 with Noctua Industrial Fans
Memory PAtriot Viper Elite RGB 96GB @ 6000MHz.
Video Card(s) Asus ROG Strix GeForce RTX 3090 24GB OC EVA Edition
Storage Addlink S95 M.2 PCIe GEN 4x4 2TB
Display(s) Asus ROG SWIFT OLED PG42UQ
Case Thermaltake Core P3 TG
Audio Device(s) Realtek on board > Sony Receiver > Cerwin Vegas
Power Supply be quiet DARK POWER PRO 12 1500W
Mouse ROG STRIX Impact Electro Punk
Keyboard ROG STRIX Scope TKL Electro Punk
Software Windows 11
cant get them to boot 2666, could do it for my 2600 I am running.
 

cadaveca

My name is Dave
Joined
Apr 10, 2006
Messages
17,232 (2.63/day)
cant get them to boot 2666, could do it for my 2600 I am running.

voltage added to VCCSA doesn't make for good boot? It won't be 24/7 stable, but you might be able to bench for some time if voltage helps. Like BS...:p I mean SB...:p, try to keep VTT/VCCSA under 1.2 V.
 

sneekypeet

Retired Super Moderator
Joined
Apr 12, 2006
Messages
29,407 (4.48/day)
System Name EVA-01
Processor Intel i7 13700K
Motherboard Asus ROG Maximus Z690 HERO EVA Edition
Cooling ASUS ROG Ryujin III 360 with Noctua Industrial Fans
Memory PAtriot Viper Elite RGB 96GB @ 6000MHz.
Video Card(s) Asus ROG Strix GeForce RTX 3090 24GB OC EVA Edition
Storage Addlink S95 M.2 PCIe GEN 4x4 2TB
Display(s) Asus ROG SWIFT OLED PG42UQ
Case Thermaltake Core P3 TG
Audio Device(s) Realtek on board > Sony Receiver > Cerwin Vegas
Power Supply be quiet DARK POWER PRO 12 1500W
Mouse ROG STRIX Impact Electro Punk
Keyboard ROG STRIX Scope TKL Electro Punk
Software Windows 11
IDK let me try it out Post code 23 at 1.20V VCCSA

Just for giggles at 2600:
 
Joined
Jul 19, 2006
Messages
43,585 (6.74/day)
Processor AMD Ryzen 7 7800X3D
Motherboard ASUS TUF x670e
Cooling EK AIO 360. Phantek T30 fans.
Memory 32GB G.Skill 6000Mhz
Video Card(s) Asus RTX 4090
Storage WD m.2
Display(s) LG C2 Evo OLED 42"
Case Lian Li PC 011 Dynamic Evo
Audio Device(s) Topping E70 DAC, SMSL SP200 Headphone Amp.
Power Supply FSP Hydro Ti PRO 1000W
Mouse Razer Basilisk V3 Pro
Keyboard Tester84
Software Windows 11
I have the guide that info is based off of. It's for clocking and not 24/7, trust me.


I didn't get it from a guide. :confused: I had quite a few back and forth PM's with Raja. But okay, I trust you.

Good luck!
 

cadaveca

My name is Dave
Joined
Apr 10, 2006
Messages
17,232 (2.63/day)
I didn't get it from a guide. :confused: I had quite a few back and forth PM's with Raja. But okay, I trust you.

Good luck!

He got it from a guide..or he wrote the guide. :p Part of the info pack with the review sample. :p It's for benching, as is the increased voltages.

I can see already, peet, that timings are not set correctly. ASUS doesn't listen to tRC, tRFC or tWCL from SPD, but none of those will help you, unfortunately.

Post code 23 at 1.20V VCCSA

PLL overvolt enabled? And is this two stick kit or 4?
 
Last edited:

sneekypeet

Retired Super Moderator
Joined
Apr 12, 2006
Messages
29,407 (4.48/day)
System Name EVA-01
Processor Intel i7 13700K
Motherboard Asus ROG Maximus Z690 HERO EVA Edition
Cooling ASUS ROG Ryujin III 360 with Noctua Industrial Fans
Memory PAtriot Viper Elite RGB 96GB @ 6000MHz.
Video Card(s) Asus ROG Strix GeForce RTX 3090 24GB OC EVA Edition
Storage Addlink S95 M.2 PCIe GEN 4x4 2TB
Display(s) Asus ROG SWIFT OLED PG42UQ
Case Thermaltake Core P3 TG
Audio Device(s) Realtek on board > Sony Receiver > Cerwin Vegas
Power Supply be quiet DARK POWER PRO 12 1500W
Mouse ROG STRIX Impact Electro Punk
Keyboard ROG STRIX Scope TKL Electro Punk
Software Windows 11
shit IDK, let me try again...lol

XMP #1...2667 1.65V, 1.20 VCCSA, Internal PLL OV enabled = post code 23
XMP#2...2665 1.65V, 1.20 VCCSA, Internal PLL OV Enabled = post code 23

Edit: 2 X 4 GB kit to try to ease the IMC strain versus the 16GB Plats, didn't seem to help:(
 
Last edited:

cadaveca

My name is Dave
Joined
Apr 10, 2006
Messages
17,232 (2.63/day)
shit IDK, let me try again...lol

That''s the one or two things to try when faced with "23". Boost voltages and PLL overvolt. PLL overvolt is OK 24/7, boosted voltages, I don't believe are needed, seems to be what memory makers say too(still waiting for reply from one maker).


I tested 32 new CPUs over Christmas holidays now, all those CPUs are just the same too, voltages not needed, no tweaks needed...

Unfortunate thing is not one would do 2800 MHz, either. I'm still hunting for that.:banghead:

XMP #1...2667 1.65V, 1.20 VCCSA, Internal PLL OV enabled = post code 23
XMP#2...2665 1.65V, 1.20 VCCSA, Internal PLL OV Enabled = post code 23

Enable XMP, set 2400 Mhz divider, then 2600 MHz, do those work?


Also, set CPU voltage manually to 1.3 V while testing, just to make sure it's not fouling things.

Profile #1 or Profile #2 has never made any difference for me.

My second MVE will be here later today, I'll toss up some screenshots then. I'm not gonna mount up the CPU and stuff to my current board just to take it down later today.
 
Last edited:

sneekypeet

Retired Super Moderator
Joined
Apr 12, 2006
Messages
29,407 (4.48/day)
System Name EVA-01
Processor Intel i7 13700K
Motherboard Asus ROG Maximus Z690 HERO EVA Edition
Cooling ASUS ROG Ryujin III 360 with Noctua Industrial Fans
Memory PAtriot Viper Elite RGB 96GB @ 6000MHz.
Video Card(s) Asus ROG Strix GeForce RTX 3090 24GB OC EVA Edition
Storage Addlink S95 M.2 PCIe GEN 4x4 2TB
Display(s) Asus ROG SWIFT OLED PG42UQ
Case Thermaltake Core P3 TG
Audio Device(s) Realtek on board > Sony Receiver > Cerwin Vegas
Power Supply be quiet DARK POWER PRO 12 1500W
Mouse ROG STRIX Impact Electro Punk
Keyboard ROG STRIX Scope TKL Electro Punk
Software Windows 11
I am running XMP set to 2600mhz now without issue.

Haven't tried the CPU voltage this time, but I know it didnt help the plats with 1.3V CPU running.

Locked on 23 again.
 
Top