- Joined
- Jun 27, 2011
- Messages
- 6,684 (1.43/day)
Processor | 7800x3d |
---|---|
Motherboard | Gigabyte B650 Auros Elite AX |
Cooling | Custom Water |
Memory | GSKILL 2x16gb 6000mhz Cas 30 with custom timings |
Video Card(s) | MSI RX 6750 XT MECH 2X 12G OC |
Storage | Adata SX8200 1tb with Windows, Samsung 990 Pro 2tb with games |
Display(s) | HP Omen 27q QHD 165hz |
Case | ThermalTake P3 |
Power Supply | SuperFlower Leadex Titanium |
Software | Windows 11 64 Bit |
Benchmark Scores | CB23: 1811 / 19424 CB24: 1136 / 7687 |
Old:
New:
I got this new memory because it was for a good price and I was looking for some, albeit not as fast as this or for my main rig. I got lucky though. Thanks HammerON for the great deal!!
Anyways it is design for x58 and I want to use it in z77. It is 2000mhz memory which z77 does not do by default as far as I know. Compared to my old ram this stuff is heavy. You can see the copper on there. I am not the most experienced with memory overclocking and related things but I feel these sticks are where to learn. I will have some questions at the end of the thread. For now I shall show benchmarks.
Old:
7zip
SuperPie
New:
1866 mhz is what the ram booted to. I was curious as to where it would boot to because of the x58 and 2000 mhz as I mentioned above. Had marginal, but visible improvements over my old ram.
7zip
SuperPie
I did try just changing the ram to 2133mhz. It booted but could not finish any benchmarks without failing.
Basically my questions boil down to how do I get more out of this ram, or if I even can? I am poking through some memory overclocking guides at this moment.
New:
I got this new memory because it was for a good price and I was looking for some, albeit not as fast as this or for my main rig. I got lucky though. Thanks HammerON for the great deal!!
Anyways it is design for x58 and I want to use it in z77. It is 2000mhz memory which z77 does not do by default as far as I know. Compared to my old ram this stuff is heavy. You can see the copper on there. I am not the most experienced with memory overclocking and related things but I feel these sticks are where to learn. I will have some questions at the end of the thread. For now I shall show benchmarks.
Old:
7zip
SuperPie
New:
1866 mhz is what the ram booted to. I was curious as to where it would boot to because of the x58 and 2000 mhz as I mentioned above. Had marginal, but visible improvements over my old ram.
7zip
SuperPie
I did try just changing the ram to 2133mhz. It booted but could not finish any benchmarks without failing.
Basically my questions boil down to how do I get more out of this ram, or if I even can? I am poking through some memory overclocking guides at this moment.