Your PC ATM

GreiverBlade · Aug 6, 2013

Or the USA bombing operation on Iraq in 1998?... The psu coloring is more "modern US" army tone than WWII german nazi kaki :roll:

Or maybe they just love fennec foxes or the football team with the same name .

Vario · Aug 6, 2013

Rubber edging from McMaster Carr on the front door fan hole

The part is Standard Rubber Edge Trim
1/4" Opening, 11/32" Inside Depth
SKU#: 8507K22
http://www.mcmaster.com/#8507k22/=ny9xh2

and all back together now

this hole looks really good, wish it photographed better

GreiverBlade · Aug 7, 2013

a little mail later ... they confrimed they will send the HAF-XB today ... weee at last! but the BitFenix Spectre Pro 120 are delayed to 12.08, recieved today : 2 shadow wings 80 and the true quiet 120

notice the "3d" effect on the Shadow Wings name? ... its not a 3d effect ... damn phone ...

too bad they where out of stock for Enermax Cluster UCCL12 white led, i had to go for that one instead

well they arent half bad the silicon insert and the 2 position speed switch make them even better technically than UCCL12 but ... they are not white ... :ohwell:

damn ... i really should invest in a digital camera instead of keeping using my UMI X1

maybe i should swap the 2 UCCL12 for 2 more true quiet since they are nearly 12chf less than the 1st mentioned (for the linux rig who need less "cooling" than the main) after a little testing the noises of the Antec are lower than the Enermax and the lighning is a bit brighter i think they might look fine in place of the UCCL12 i think i will do a all white light and a all red light when i recieve the Spectre pro.

also i thought on some custom tribal foxes paintjob for the mainrig to emphasise the PSU used, i just need to google some info and give a try on a unused black case i have aside.

Knight091 · Aug 7, 2013

MT Alex said:
That's why you keep one of these around, you simply pull the front panel off and snake this in the hole. No need for sliding the res out. His looks pretty classy with the eccentric twist in it, but I've seen others that don't.
http://img.techpowerup.org/130806/IMG_20130806_110549_327995.jpg

I just use a hardware store brass stopper and clamp, but mine is well hidden. I never plumb a loop without a drain, anymore.

http://img.techpowerup.org/110831/038.jpg
http://img.techpowerup.org/110831/036.jpg

I made the same thing for refilling my rez. Works great and simple and fast.

Jetster · Aug 7, 2013

Klipsch SW 350

rbrock · Aug 8, 2013

I wanted to add air filtration to my most recent build. I'm not sure why I began this tedious process. I'm single and probably don't vacuum as often as I should. My builds don't get very dusty inside and I blow them out at intervals, but why let dust in at all? There are vendors that sell filters that you can stick on your case but all that I found required replacement instead of just washing them out, so I bought a 5' roll of 1/8" 60 pore foam http://www.mcmaster.com/?m=true#foam...ilters/=nyqxj7 (2195K102). The 60 pore foam had longer lengths to work with than the 45 pore that they label as "Electronic Equipment Air Filter Pads". More pores per inch catches smaller particles than foam with fewer pores per inch.

I originally intended to use metal channels to frame the foam filters but I found some plastic edging near the doors and flooring section of Lowe's Hardware and decided it would be easier to cut into the shapes I wanted. I cut each piece with a paper cutter and/or scissors, but the plastic flexes and it does a sloppy job. The frames are held together with superglue and scotch tape. None of the angles on the ends match up exactly with the next piece but they come close enough and the foam sandwiched in the channel covers any air gaps.

It was easy to make frames to cover the TAC2.0 openings on the side and top. They are held on with magnetic tape. The front of the case also was easy, with two removable vents in the 5.25 holes. I cut some foam and glued it on the back of each and glued another piece of foam to the air hole in the bottom. The 5.25 vents can just be popped out and run under the faucet but I don't know how I can clean that bottom piece when it gets dirty. I probably could have found a better solution there but I got lazy.

[url]http://i1091.photobucket.com/albums/i386/aybcs89/case_airfilter_1_zps570981cc.jpg[/URL]
[[url]http://i1091.photobucket.com/albums/i386/aybcs89/case_airfilter_2_zps91eede6f.jpg[/URL]

There are openings in the bottom for the power supply fan and an 80mm case fan which are larger than they need to be, and there are stress bends and feet and rivets and lumps inside and out. I couldn't create easy rectangular frames that sat flush on the outside, and the inside was cramped and required measurements more precise than I could create with a carpet knife and plastic edging. Frames on the inside would have to go under the fans, and they would have to be removed to clean the filter, so I decided to just lay out loose foam in the shape I needed and clamp it down with the fan/PSU. Those will be an big pain to clean but the PC will be on my desk and shouldn't collect a let of dust.

[url]http://i1091.photobucket.com/albums/i386/aybcs89/case_airfilter_3_zps54cea64c.jpg[/URL]

The back has an exhaust fan and exhaust doesn't get filtered. There's an opening about 1" x 6", and I took two lengths of edging and velcroed them inside the case on either side of the opening. There wasn't room for a full frame, I'll just slip the foam in and out when it needs to be cleaned.

[url]http://i1091.photobucket.com/albums/i386/aybcs89/case_airfilter_4_zpsf5d40e59.jpg[/URL]

There were also a lot of holes that were in the back and bottom of the case that served no apparent purpose. I got some silicone sealer and plugged them up. It's messy, but this is a machine not a piece of furniture.

[url]http://i1091.photobucket.com/albums/i386/aybcs89/case_airfilter_5_zps5e41e5e7.jpg[/URL]
[url]http://i1091.photobucket.com/albums/i386/aybcs89/case_airfilter_6_zpsfd965afa.jpg[/URL]

Some of these vents may turn out to be exhausts when everything is assembled and running. I can just remove the framing around them and be good to go. If I had bought stronger magnetic tape I likely could have omitted the frames, but the Lowes stuff is weak sauce. The unused slots in and around the rear card panel can't be easily filtered. I could tape some foam across them on the inside but I'm really not that compulsive, I was just bored and looking for something to do until I could actually build the box. McMaster-Carr is a great place. It has raw materials for almost any project and they don't mind taking very small and inexpensive orders.

GreiverBlade · Aug 8, 2013

Raise the flag Red'n White its allright!

well now waiting for the Red BitFenix Spectre pro 120 and the red will be finish[r]ed
i think full white on the main rig looks gorgeous!

Edit: when i mean IFX-14: overkill ... the 65w PHII X2 511 sit at 19c idle ... and the Hawk at 26c idle ... lets start a Unigine Heaven Linux to see ... huhuhu

not too bad considering the crap CPU i have in that ... haha.

t_ski · Aug 8, 2013

GreiverBlade said:
http://img441.imageshack.us/img441/4923/qx0a.jpg http://img13.imageshack.us/img13/1056/itup.jpg http://img856.imageshack.us/img856/3589/3w68.jpg http://img694.imageshack.us/img694/5231/4pbv.jpg
http://imageshack.us/a/img38/2152/srra.jpg
http://imageshack.us/a/img844/1884/ppr7.jpg

well now waiting for the Red BitFenix Spectre pro 120 and the red will be finish[r]ed
i think full white on the main rig looks gorgeous!

woops i forgot to set "resize" oh well Spoiler is mandatory now xD

Edit: when i mean IFX-14: overkill ... the 65w PHII X2 511 sit at 19c idle ... and the Hawk at 26c idle ... lets start a Unigine Heaven Linux to see ... huhuhu

http://img.techpowerup.org/130808/Capturedu2013-08-08133233.png
http://img.techpowerup.org/130808/Capturedu2013-08-08133255.png
not too bad considering the crap CPU i have in that ... haha.
http://img.techpowerup.org/130808/Capturedu2013-08-08133331.png

Pro tip: don't use mega huge images with spoiler tags :slap:

GreiverBlade · Aug 8, 2013

i just used mega huge image with spoiler because they werent resized ... to avoid mega huge loading time and added a lile "woops" to warn about the lack of resize, so those with a small... aherm connection, would pass on

here take a beer :toast:

till i re upload or resize them

i hope the beer wasnt to hot or too cold.

craigo · Aug 8, 2013

I bought some heatsinks for the VRM on my AMD setup..

Vario · Aug 8, 2013

rbrock said:
I wanted to add air filtration to my most recent build. I'm not sure why I began this tedious process. I'm single and probably don't vacuum as often as I should. My builds don't get very dusty inside and I blow them out at intervals, but why let dust in at all? There are vendors that sell filters that you can stick on your case but all that I found required replacement instead of just washing them out, so I bought a 5' roll of 1/8" 60 pore foam http://www.mcmaster.com/?m=true#foam...ilters/=nyqxj7 (2195K102). The 60 pore foam had longer lengths to work with than the 45 pore that they label as "Electronic Equipment Air Filter Pads". More pores per inch catches smaller particles than foam with fewer pores per inch.

I originally intended to use metal channels to frame the foam filters but I found some plastic edging near the doors and flooring section of Lowe's Hardware and decided it would be easier to cut into the shapes I wanted. I cut each piece with a paper cutter and/or scissors, but the plastic flexes and it does a sloppy job. The frames are held together with superglue and scotch tape. None of the angles on the ends match up exactly with the next piece but they come close enough and the foam sandwiched in the channel covers any air gaps.

It was easy to make frames to cover the TAC2.0 openings on the side and top. They are held on with magnetic tape. The front of the case also was easy, with two removable vents in the 5.25 holes. I cut some foam and glued it on the back of each and glued another piece of foam to the air hole in the bottom. The 5.25 vents can just be popped out and run under the faucet but I don't know how I can clean that bottom piece when it gets dirty. I probably could have found a better solution there but I got lazy.

[url]http://i1091.photobucket.com/albums/i386/aybcs89/case_airfilter_1_zps570981cc.jpg[/URL]
[[url]http://i1091.photobucket.com/albums/i386/aybcs89/case_airfilter_2_zps91eede6f.jpg[/URL]

There are openings in the bottom for the power supply fan and an 80mm case fan which are larger than they need to be, and there are stress bends and feet and rivets and lumps inside and out. I couldn't create easy rectangular frames that sat flush on the outside, and the inside was cramped and required measurements more precise than I could create with a carpet knife and plastic edging. Frames on the inside would have to go under the fans, and they would have to be removed to clean the filter, so I decided to just lay out loose foam in the shape I needed and clamp it down with the fan/PSU. Those will be an big pain to clean but the PC will be on my desk and shouldn't collect a let of dust.

[url]http://i1091.photobucket.com/albums/i386/aybcs89/case_airfilter_3_zps54cea64c.jpg[/URL]

The back has an exhaust fan and exhaust doesn't get filtered. There's an opening about 1" x 6", and I took two lengths of edging and velcroed them inside the case on either side of the opening. There wasn't room for a full frame, I'll just slip the foam in and out when it needs to be cleaned.

[url]http://i1091.photobucket.com/albums/i386/aybcs89/case_airfilter_4_zpsf5d40e59.jpg[/URL]

There were also a lot of holes that were in the back and bottom of the case that served no apparent purpose. I got some silicone sealer and plugged them up. It's messy, but this is a machine not a piece of furniture.

[url]http://i1091.photobucket.com/albums/i386/aybcs89/case_airfilter_5_zps5e41e5e7.jpg[/URL]
[url]http://i1091.photobucket.com/albums/i386/aybcs89/case_airfilter_6_zpsfd965afa.jpg[/URL]

Some of these vents may turn out to be exhausts when everything is assembled and running. I can just remove the framing around them and be good to go. If I had bought stronger magnetic tape I likely could have omitted the frames, but the Lowes stuff is weak sauce. The unused slots in and around the rear card panel can't be easily filtered. I could tape some foam across them on the inside but I'm really not that compulsive, I was just bored and looking for something to do until I could actually build the box. McMaster-Carr is a great place. It has raw materials for almost any project and they don't mind taking very small and inexpensive orders.

The filters turned out well. Might have misread, but you should not run exhaust filters , because its exhaust it will blow out any dust that falls in and it certainly won't intake any dust (because ... its exhaust

)

GreiverBlade · Aug 8, 2013

craigo said:
I bought some heatsinks for the VRM on my AMD setup..

Cute Maneki -Neko here ... insta thanks +

funny sidenote ... i noticed that the MSI Twin FrozrII logo on the side of my card appear lighted but its not, in live it does look like it due to the sunlight :eek:

wich make it shine white instead of red as the lightning of the case is meant to be, by night its of a nice red glow... now i know why i love those MSI coolers

ibay190 · Aug 9, 2013

Recently upgrade GPU from HIS HD 7750 1GB GDDR5 iceQ to MSI-GTX 650 Ti Boost twin frozr, and add WD cavlar blue 1TB HDD, replace my old Seagate 250 GB.

- AMD Phenom II X4 955BE (non OC)
- Gigabyte 78LMT-S2P
- Cooler Master Hyper 212X (1 fan)
- MSI GTX 650 ti Boost Twin Frozr 2GB GDDR5
- GSKILL Ripjaws PC-1600 2 x 4GB (8GB)
- WD Cavlar Blue 1 TB
- WD Cavlar Blue 500 GB
- Enermax NAXN 550-B 82+ Bronze Power Suplly
- Azza Toledo 301 - Side Window Case

i'll update soom with open side panel since i'm bit busy

Deleted member 24505 · Aug 9, 2013

Here's what mine is like now.

Big thx to Moonpig :toast:

RCoon · Aug 9, 2013

tigger said:
Here's what mine is like now.

Big thx to Moonpig

http://img.techpowerup.org/130809/pc1.jpg
http://img.techpowerup.org/130809/pc2.jpg

Now that sir is a fine and sexy clean rig. :toast:

Mine is an utter mess atm, waiting on my new bits.

Black.Raven · Aug 9, 2013

tigger said:
Here's what mine is like now.

Big thx to Moonpig

http://img.techpowerup.org/130809/pc1.jpg
http://img.techpowerup.org/130809/pc2.jpg

Wich case is that? I like the clean look :cool:

Nvm. its in ur discription

Deleted member 24505 · Aug 9, 2013

RCoon said:
Now that sir is a fine and sexy clean rig.

Mine is an utter mess atm, waiting on my new bits.

Thx.

I will get some prettier fans soon, and maybe sleeve the psu cables(I know it's a Hiper) I am considering going water again in this case too, maybe a 240/280 in the top and a 120 in the bottom or front. Can't wait to get my 3570k cpu.....soon my precious.

d1nky · Aug 9, 2013

i love the look of that psu tigger!

beefy and sexy like a buff female wrestler lol

Deleted member 24505 · Aug 9, 2013

d1nky said:
i love the look of that psu tigger!

beefy and sexy like a buff female wrestler lol

It's a Hiper type R 580w, some might disagree, I think they have a very bad rep. It seems fine, and I guess I am nowhere near the 580 so hopefully will be ok.

GreiverBlade · Aug 9, 2013

Black.Raven said:
Wich case is that? I like the clean look Nvm. its in ur discription

seems to be a Fractal Design hum ... i'd say ... Arc Mini R2 judging by the front, nope Arc Mini 1st serie the R2 have the logo Fractal Design in the front mesh bottom

and i didnt bothered looking the "system specs" of tigger :roll:

tigger said:
It's a Hiper type R 580w, some might disagree, I think they have a very bad rep. It seems fine, and I guess I am nowhere near the 580 so hopefully will be ok.

well ,... im using a Chieftec Nitro85+ 650w in my linux rig ... bad rep too xD but it works just fine

n3rdf1ght3r · Aug 10, 2013

Adding LEDs to a file server was a terrible idea...

PopcornMachine · Aug 10, 2013

It has a nice utilitarian look about it.

GreiverBlade · Aug 10, 2013

considering a 660 :eek:

cant find some review on it (and i think i know why

) but i like the look and the seller ship it for free at 200ish $ price

evaluating financial state

other "White" card are either for mac (as the 7950 from sapphire i think) or cant find them where i live :confused:

well

de.das.dude · Aug 10, 2013

go 760!

RCoon · Aug 10, 2013

GreiverBlade said:
considering a 660
http://img.techpowerup.org/130810/706078584_2_Big.jpg
cant find some review on it (and i think i know why ) but i like the look and the seller ship it for free at 200ish $ price

evaluating financial state

other "White" card are either for mac (as the 7950 from sapphire i think) or cant find them where i live well

KFA2 and Galaxy make white cards. I've considered them in the past.

System Name	main/SFFHTPCARGH!(tm)/Xiaomi Mi TV Stick/Samsung Galaxy S23/Ally
Processor	Ryzen 7 5800X3D/i7-3770/S905X/Snapdragon 8 Gen 2/Ryzen Z1 Extreme
Motherboard	MSI MAG B550 Tomahawk/HP SFF Q77 Express/uh?/uh?/Asus
Cooling	Enermax ETS-T50 Axe aRGB /basic HP HSF /errr.../oh! liqui..wait, no:sizable vapor chamber/a nice one
Memory	64gb Corsair Vengeance Pro 3600mhz DDR4/8gb DDR3 1600/2gb LPDDR3/8gb LPDDR5x 4200/16gb LPDDR5
Video Card(s)	Hellhound Spectral White RX 7900 XTX 24gb/GT 730/Mali 450MP5/Adreno 740/RDNA3 768 core
Storage	250gb870EVO/500gb860EVO/2tbSandisk/NVMe2tb+1tb/4tbextreme V2/1TB Arion/500gb/8gb/256gb/2tb SN770M
Display(s)	X58222 32" 2880x1620/32"FHDTV/273E3LHSB 27" 1920x1080/6.67"/AMOLED 2X panel FHD+120hz/FHD 120hz
Case	Cougar Panzer Max/Elite 8300 SFF/None/back/back-front Gorilla Glass Victus 2+ UAG Monarch Carbon
Audio Device(s)	Logi Z333/SB Audigy RX/HDMI/HDMI/Dolby Atmos/KZ x HBB PR2/Edifier STAX Spirit S3 & SamsungxAKG beans
Power Supply	Chieftec Proton BDF-1000C /HP 240w/12v 1.5A/4Smart Voltplug PD 30W/Asus USB-C 65W
Mouse	Speedlink Sovos Vertical-Asus ROG Spatha-Logi Ergo M575/Xiaomi XMRM-006/touch/touch
Keyboard	Endorfy Thock 75% <3/none/touch/virtual
VR HMD	Medion Erazer
Software	Win10 64/Win8.1 64/Android TV 8.1/Android 13/Win11 64
Benchmark Scores	bench...mark? i do leave mark on bench sometime, to remember which one is the most comfortable. :o

System Name	Computer of Theseus
Processor	Intel i9-12900KS: 50x Pcore multi @ 1.18Vcore (target 1.275V -100mv offset)
Motherboard	EVGA Z690 Classified
Cooling	Noctua NH-D15S, 2xThermalRight TY-143, 4xNoctua NF-A12x25,3xNF-A12x15, 2xAquacomputer Splitty9Active
Memory	G-Skill Trident Z5 (32GB) DDR5-6000 C36 F5-6000J3636F16GX2-TZ5RK
Video Card(s)	EVGA Geforce 3060 XC Black Gaming 12GB
Storage	1x Samsung 970 Pro 512GB NVMe (OS), 2x Samsung 970 Evo Plus 2TB (data 1 and 2), ASUS BW-16D1HT
Display(s)	Dell S3220DGF 32" 2560x1440 165Hz Primary, Dell P2017H 19.5" 1600x900 Secondary, Ergotron LX arms.
Case	Lian Li O11 Air Mini
Audio Device(s)	Audiotechnica ATR2100X-USB, El Gato Wave XLR Mic Preamp, ATH M50X Headphones, Behringer 302USB Mixer
Power Supply	Super Flower Leadex Platinum SE 1000W 80+ Platinum White
Mouse	Zowie EC3-C
Keyboard	Vortex Multix 87 Winter TKL (Gateron G Pro Yellow)
Software	Win 10 LTSC 21H2

System Name	main/SFFHTPCARGH!(tm)/Xiaomi Mi TV Stick/Samsung Galaxy S23/Ally
Processor	Ryzen 7 5800X3D/i7-3770/S905X/Snapdragon 8 Gen 2/Ryzen Z1 Extreme
Motherboard	MSI MAG B550 Tomahawk/HP SFF Q77 Express/uh?/uh?/Asus
Cooling	Enermax ETS-T50 Axe aRGB /basic HP HSF /errr.../oh! liqui..wait, no:sizable vapor chamber/a nice one
Memory	64gb Corsair Vengeance Pro 3600mhz DDR4/8gb DDR3 1600/2gb LPDDR3/8gb LPDDR5x 4200/16gb LPDDR5
Video Card(s)	Hellhound Spectral White RX 7900 XTX 24gb/GT 730/Mali 450MP5/Adreno 740/RDNA3 768 core
Storage	250gb870EVO/500gb860EVO/2tbSandisk/NVMe2tb+1tb/4tbextreme V2/1TB Arion/500gb/8gb/256gb/2tb SN770M
Display(s)	X58222 32" 2880x1620/32"FHDTV/273E3LHSB 27" 1920x1080/6.67"/AMOLED 2X panel FHD+120hz/FHD 120hz
Case	Cougar Panzer Max/Elite 8300 SFF/None/back/back-front Gorilla Glass Victus 2+ UAG Monarch Carbon
Audio Device(s)	Logi Z333/SB Audigy RX/HDMI/HDMI/Dolby Atmos/KZ x HBB PR2/Edifier STAX Spirit S3 & SamsungxAKG beans
Power Supply	Chieftec Proton BDF-1000C /HP 240w/12v 1.5A/4Smart Voltplug PD 30W/Asus USB-C 65W
Mouse	Speedlink Sovos Vertical-Asus ROG Spatha-Logi Ergo M575/Xiaomi XMRM-006/touch/touch
Keyboard	Endorfy Thock 75% <3/none/touch/virtual
VR HMD	Medion Erazer
Software	Win10 64/Win8.1 64/Android TV 8.1/Android 13/Win11 64
Benchmark Scores	bench...mark? i do leave mark on bench sometime, to remember which one is the most comfortable. :o

System Name	Devil Red
Processor	Intel i7 3820 @ 4.7GHz
Motherboard	ASUS Rampage IV Formula x79
Cooling	Water cooling CPU, MOSFET,SLI GTX 690
Memory	Corsair 32GB DDR3 1866 MHz
Video Card(s)	(SLI) ASUS GTX 690
Storage	120GB Corsair SSD/WD 300GB VRaptor
Display(s)	HP ZR30w Pro 30" LCD
Case	Corsair 900d Modded
Audio Device(s)	X-FI
Power Supply	Corsair AX1200i
Software	3DsMax, Maya, ZBrush, Photoshop Master Collection, and some more software

System Name	Juliette // HTPC
Processor	Intel i7 9700K // AMD Ryzen 5 5600G
Motherboard	ASUS Prime Z390X-A // ASRock B550 ITX-AC
Cooling	Noctua NH-U12 Black // Stock
Memory	Corsair DDR4 3600 32gb //G.SKILL Trident Z Royal Series 16GB (2 x 8GB) 3600
Video Card(s)	ASUS RTX4070 OC// GTX 1650
Storage	Samsung 970 EVO NVMe 1Tb, Intel 665p Series M.2 2280 1TB // Samsung 1Tb SSD
Display(s)	ASUS VP348QGL 34" Quad HD 3440 x 1440 // 55" LG 4K SK8000 Series
Case	Seasonic SYNCRO Q7// Silverstone Granada GD05
Audio Device(s)	Focusrite Scarlett 4i4 // HDMI to Samsung HW-R650 sound bar
Power Supply	Seasonic SYNCRO 750 W // CORSAIR Vengeance 650M
Mouse	Cooler Master MM710 53G
Keyboard	Logitech 920-009300 G512 SE
Software	Windows 10 Pro // Windows 10 Pro

Your PC ATM

GreiverBlade

Vario

GreiverBlade

Knight091

Jetster

rbrock

New Member

GreiverBlade

t_ski

Former Staff

GreiverBlade

craigo

Attachments

Vario

GreiverBlade

ibay190

Deleted member 24505

Guest

RCoon

Black.Raven

Deleted member 24505

Guest

d1nky

Deleted member 24505

Guest

GreiverBlade

n3rdf1ght3r

PopcornMachine

GreiverBlade

de.das.dude

Pro Indian Modder

RCoon

System Name	Brocks PC
Processor	AMD a4-5400
Motherboard	Biostar Hi-Fi A85W
Cooling	stock
Memory	PNY 8GB (2 x 4GB) DDR3-1866
Video Card(s)	none
Storage	Seagate 3TB, WD 750GB, WD 160GB and many loose ones
Display(s)	Dell CRT
Case	Sentey 1410+
Audio Device(s)	none
Power Supply	OCZ Fatal1ty
Software	Windoiws 7 Home Premium 64bit

System Name	My i7 Beast
Processor	Intel Core i7 6800K
Motherboard	Asus X99-A II
Cooling	Nickel-plated EK Supremacy EVO, D5 with XSPC Bayres & BIX Quad Radiator
Memory	4 x 8GB EVGA SuperSC DDR4-3200
Video Card(s)	EVGA 1080 SuperClocked
Storage	Samsung 950 Pro 256GB m.2 SSD + 480GB Sandisk storage SSD
Display(s)	Three Asus 24" VW246H LCD's
Case	Silverstone TJ07
Audio Device(s)	Onboard
Power Supply	Corsair AX1200
Keyboard	Corsair K95
Software	Windows 10 x64 Pro

System Name	HP Omen 17
Processor	i7 7700HQ
Memory	16GB 2400Mhz DDR4
Video Card(s)	GTX 1060
Storage	Samsung SM961 256GB + HGST 1TB
Display(s)	1080p IPS G-SYNC 75Hz
Audio Device(s)	Bang & Olufsen
Power Supply	230W
Mouse	Roccat Kone XTD+
Software	Win 10 Pro

System Name	Main Pc \| Xeon rig
Processor	Intel Core i5-4670 @3.6Ghz \| Intel Xeon X5675 @stock
Motherboard	Gigabyte GA-Z87-HD3 \| Sabertooth X58
Cooling	Noctua NH-U9B SE2 \| Noctua NH-D14
Memory	16GB Crucial OC @ 2133mhz \| 12 GB Various
Video Card(s)	MSI RX480 \| MSI R7970 TF III 3GD5 OC BE (Bios mod 1081 mV)
Storage	120GB Samsung Evo\ 4TB WD HDD \| 120GB Samsung Evo
Case	NZXT H440 \| Fractal Design Define R5
Power Supply	Seasonic 650 Watt\| Nexus 450
Software	Windows 10 Pro x64 \| Windows Server 2016 Datacenter x64

System Name	Zotan
Processor	i9-10850K
Motherboard	Gigabyte Z490 Gaming X AX
Cooling	H100
Memory	32GB Viper 3200
Video Card(s)	Zotac RTX3080
Case	Airflow 275R
Power Supply	RMX850
Benchmark Scores	d1nky@hwbot.org

System Name	That computer
Processor	Intel I7 960 OC @ 4GHz
Motherboard	Gigabyte G.1 Guerilla
Cooling	Corsair H80
Memory	12gb G.Skill DDR3 1333MHz
Video Card(s)	Gigabyte Radeon 6950 2GB
Storage	120GB Samsung 840, 2x 1TB WD Black Raid 0
Display(s)	2X ACER S232HL
Case	Thermaltake Amour A90
Audio Device(s)	Asus Xonar DX
Power Supply	600W OCZ MODXSTREAM PRO
Software	Windows 7 Ultimate x64

System Name	Vulcan
Processor	i6 6600K
Motherboard	GIGABYTE Z170X UD3
Cooling	Thermaltake Frio Silent 14
Memory	16GB Corsair Vengeance LPX 16GB (2 x 8GB)
Video Card(s)	ASUS Strix GTX 970
Storage	Mushkin Enhanced Reactor 1TB SSD
Display(s)	QNIX 27 Inch 1440p
Case	Fractal Design Define S
Audio Device(s)	On Board
Power Supply	Cooler Master V750
Software	Win 10 64-bit

System Name	Monke \| Work Thinkpad\| Old Monke
Processor	Ryzen 5600X \| Ryzen 5500U \| FX8320
Motherboard	ASRock B550 Extreme4 \| ? \| Asrock 990FX Extreme 4
Cooling	240mm Rad \| Not needed \| hyper 212 EVO
Memory	2x16GB DDR4 3600 Corsair RGB \| 16 GB DDR4 3600 \| 16GB DDR3 1600
Video Card(s)	Sapphire Pulse RX6700XT 12GB \| Vega 8 \| Sapphire Pulse RX580 8GB
Storage	Samsung 980 nvme (Primary) \| some samsung SSD
Display(s)	Dell 2723DS \| Some 14" 1080p 98%sRGB IPS \| Dell 2240L
Case	Ant Esports Tempered case \| Thinkpad \| Antec
Audio Device(s)	Logitech Z333 \| Jabra corpo stuff
Power Supply	Corsair RM750e \| not needed \| Corsair GS 600
Mouse	Logitech G400 \| nipple
Keyboard	Logitech G213 \| stock kb is awesome \| Logitech K230
VR HMD	;_;
Software	Windows 10 Professional x3
Benchmark Scores	There are no marks on my bench