AMD FX OC'ers Club

ThE_MaD_ShOt · Sep 15, 2013

I am running right around 45c under load. I am also on air with a Hyper 212+ in push pull.

suraswami · Sep 15, 2013

ThE_MaD_ShOt said:
I am running right around 45c under load. I am also on air with a Hyper 212+ in push pull.

I thought u got ur water cooler!

n0tiert · Sep 15, 2013

theoneandonlymrk said:
Not according to asus I and others were rebuked when asking in the Rog forum for a bios update for the crosshair V, apparently it supports 9series fx's unofficially and they wouldn't give an answer about if a bios update beyond 1703 is coming much to my dissmay.

Crosshair V is EOL (End of Live) so it might be the last anyway

TheoneandonlyMrK · Sep 15, 2013

n0tiert said:
Crosshair V is EOL (End of Live) so it might be the last anyway

Gay and the ch4 seemed to get more updates its a few years old max damn it.

cdawall · Sep 15, 2013

theoneandonlymrk said:
Not according to asus I and others were rebuked when asking in the Rog forum for a bios update for the crosshair V, apparently it supports 9series fx's unofficially and they wouldn't give an answer about if a bios update beyond 1703 is coming much to my dissmay.

My 5ghz run is a chvf you don't need a new bios for 9 series chip.

ThE_MaD_ShOt · Sep 15, 2013

suraswami said:
I thought u got ur water cooler!

Not yet but I may have something in the works :toast:

Random Murderer · Sep 15, 2013

ThE_MaD_ShOt said:
Not yet but I may have something in the works

I'll be interested to see what you can coax out of the UD3. It'll at least give me an idea of what to expect from this UD5 when I finally have time to sit and clock it.

ThE_MaD_ShOt · Sep 15, 2013

4.4 seemed to easy for it. So we will see. I may have to up the cooling on the vrm's. Mine is the 1.1 rev. The 4.0 rev and Ud5/Ud7 boards would be a better candidate for extreme oc'ing. But I have a ideal on mosfet cooling and may do something better for the northbridge.

suraswami · Sep 15, 2013

ThE_MaD_ShOt said:
4.4 seemed to easy for it. So we will see. I may have to up the cooling on the vrm's. Mine is the 1.1 rev. The 4.0 rev and Ud5/Ud7 boards would be a better candidate for extreme oc'ing. But I have a ideal on mosfet cooling and may do something better for the northbridge.

The stupid Northbridge heatsink is a cheap ass wiggly one same as my 970-UD3, I changed the hs to small vga cooler with a fan on it, its much better, runs cool. I also put a small fan on the VRM sink.

TheoneandonlyMrK · Sep 15, 2013

cdawall said:
My 5ghz run is a chvf you don't need a new bios for 9 series chip.

I just want a new bios dude im not getting a 9 anyway but I feel there is still room for improvement and I told asus rep so btw he at no point mentioned eol to me or anyone but hey its no biggie its working after all.

Johan45 · Sep 15, 2013

d1nky said:
I only run win7

I got your super1M back tho, im working on the wprime and superpi 32m again!

if I get a good outcome with the bios ill be trying that cinebench other wise im done on that.

d1nky said:
@cdawall get some benches going on tpu hwbot when you got the time, the thread and interest is dying..

TPU is a tough crowd lol

@johan I just noticed you've taken a couple of my topspots!

I need to get this benching up a gear, either mobo or cooling!

No worries D1nky wnjoy it while it lasts. I've got this thing straightened out finally so in time they will be mine again :nutkick:

Just have to get my benching OS's all straightened out. I've been kicking my buddy around over at OCF in the monthly challenge, UCBench all CPU got a 1827.2 and still have a fall back :cool:

nemesis.ie · Sep 16, 2013

theoneandonlymrk said:
I just want a new bios dude im not getting a 9 anyway but I feel there is still room for improvement and I told asus rep so btw he at no point mentioned eol to me or anyone but hey its no biggie its working after all.

If they even added the latest errata/AGESA that would be something.

d1nky · Sep 16, 2013

Johan45 said:
No worries D1nky wnjoy it while it lasts. I've got this thing straightened out finally so in time they will be mine again
Just have to get my benching OS's all straightened out. I've been kicking my buddy around over at OCF in the monthly challenge, UCBench all CPU got a 1827.2 and still have a fall back

ive never done UCbench, will do tomorrow or tonight.

theres a few you've got from me wprime1024 and superpi32m I want back!

I managed to bench at the weaker tests with 5.6ghz 1.72v but I had to drop my cpunb volts low to allow the vcore to go higher.

http://hwbot.org/submission/2425522_d1nky_superpi___1m_fx_8350_13sec_400ms

I don't think many have pushed the boundaries of h20 lol

Random Murderer · Sep 16, 2013

d1nky said:
ive never done UCbench, will do tomorrow or tonight.

theres a few you've got from me wprime1024 and superpi32m I want back!

I managed to bench at the weaker tests with 5.6ghz 1.72v but I had to drop my cpunb volts low to allow the vcore to go higher.

http://hwbot.org/submission/2425522_d1nky_superpi___1m_fx_8350_13sec_400ms

I don't think many have pushed the boundaries of h20 lol

Damn nice run!
Did you use the piledriver fix? It'll shave some time off.

suraswami · Sep 16, 2013

suraswami said:
Yay! turned off APM and now the board doesn't throttle (with LLC set at Regular).

This issue is still there, after resuming from S3 sleep if I run IBT test I see the board throttles the CPU frequency. But after a restart no issue.

Anybody has similar issue?

Johan45 · Sep 16, 2013

d1nky said:
ive never done UCbench, will do tomorrow or tonight.

theres a few you've got from me wprime1024 and superpi32m I want back!

I managed to bench at the weaker tests with 5.6ghz 1.72v but I had to drop my cpunb volts low to allow the vcore to go higher.

http://hwbot.org/submission/2425522_d1nky_superpi___1m_fx_8350_13sec_400ms

I don't think many have pushed the boundaries of h20 lol

Nice you really smoked me on that one. I'm patient though D1nky and a man of my word.

d1nky · Sep 16, 2013

Random Murderer said:
Damn nice run!
Did you use the piledriver fix? It'll shave some time off.

yea that was with the patch, the amount of time it takes off

Johan45 said:
Nice you really smoked me on that one. I'm patient though D1nky and a man of my word.

you have to be patient, I haven't benched for a bit properly. life is starting to get back on track as been laid off work for a bit. so hopefully I can up my game soon

I could of done better on that run tbh, but was trying to hit both 1M and 32M with the same config and couldn't get a full 32m

so johan apart from 6350 what else you bench?

Random Murderer · Sep 16, 2013

Alright guys, I found the perfect fan for my UD5's VRM heatsink. The twin fan unit(two 70mm fans in a single, oval shroud) from the original "fat" Xbox 360 fits perfectly between the backs of the I/O ports and the back of the Xig Aegir. Once it's properly wired with a cable that's long enough, I'll put it over the heatsink and hopefully find the time to clock this beast.
For those unfamiliar with the internals of the fat 360, you can see the fans clearly in the back of this pic from PCPer. I would have taken a pic of the one I had lying around, but I can't be arsed to, lol.

d1nky · Sep 16, 2013

I found the high speed AMD fan to work well and the screw fits right inside the metal fins

TheoneandonlyMrK · Sep 17, 2013

Random Murderer said:
Alright guys, I found the perfect fan for my UD5's VRM heatsink. The twin fan unit(two 70mm fans in a single, oval shroud) from the original "fat" Xbox 360 fits perfectly between the backs of the I/O ports and the back of the Xig Aegir. Once it's properly wired with a cable that's long enough, I'll put it over the heatsink and hopefully find the time to clock this beast.
For those unfamiliar with the internals of the fat 360, you can see the fans clearly in the back of this pic from PCPer. I would have taken a pic of the one I had lying around, but I can't be arsed to, lol.

id use some sort of fan control on it as ive got one in the roof of my kandalf and at full tilt its sounds like a soddin turbo, works well at mid revs though

my pc is lookin a bit too geto these days..

Durvelle27 · Sep 17, 2013

d1nky said:
I found the high speed AMD fan to work well and the screw fits right inside the metal fins

http://cdn.overclock.net/9/91/900x900px-LL-9162012f_2013-09-0811.56.43.jpeg

I use than fan off my 4100 HSF :rockout:

d1nky · Sep 17, 2013

doesn't FTW mean 'for the win'?

fits well with that lil mod I think..

TheoneandonlyMrK · Sep 17, 2013

d1nky said:
doesn't FTW mean 'for the win'?

fits well with that lil mod I think..

i thought your mobo was waterblocked d1nky , your 5.5 at 1.6+ volts is highly surpriseing :eek:

, have you got your base out the window

and how many phases does the fatality mobo have pls?

d1nky · Sep 17, 2013

lol no its just the same in that pic and my rigs 8-10 foot away from a window, but with the window open can get around 10*c ambients at night. sometimes I even bench with the side on :eek:

the loop is pretty amazing tbh!

the fatlady has 12 phases on cpu, but as johan has shown that doesn't count at all!

Durvelle27 · Sep 17, 2013

d1nky said:
lol no its just the same in that pic and my rigs 8-10 foot away from a window, but with the window open can get around 10*c ambients at night. sometimes I even bench with the side on

the loop is pretty amazing tbh!

the fatlady has 12 phases on cpu, but as johan has shown that doesn't count at all!

Yep. My board is only 6+2 and I have pushed 1.6v through it with no problems.

System Name	Selene / Yoda
Processor	Fx 8350 @ 4.4 / Phenom II x6 1090t @ 3.6
Motherboard	Gigabyte 990FXA-UD3 r4.0 / Gigabyte 890XA-UD3
Cooling	H100i / Xig Dark Knight
Memory	4x 8gb G.Skill Snipers / 4x 4gb G.Skill Ares
Video Card(s)	Gigabyte R9 290x / XfX DD & VisionTek HD6850's C'fired
Storage	256gb ssd, 2x 2tb Wd Blacks & 1x 1tb Wd black / 1x 1tb
Display(s)	Dell Ultra Sharp 2408 WFp / Hp w2207
Case	Raidmax Vampire / Chieftec Alum. Dragon Blue
Audio Device(s)	Onboard Hd Audio / Onboard Hd Audio
Power Supply	Corsair TX 850 watt / Corsair TX 750 watt
Mouse	Logitech G500s
Keyboard	Corsair Strafe
Software	Win 10 pro / Win Vista Home prem. 64 bit
Benchmark Scores	What are benchmarks anyway?

System Name	---
Processor	FX 8350 @ 4.00 Ghz with 1.28v
Motherboard	Gigabyte 990FX-UD3 v4.0, Hacked Bios F4.x
Cooling	Silenx 4 pipe Tower cooler + 2 x Cougar 120mm fan, 3 x 120mm, 1 x 200 mm Red LED fan
Memory	Kingston HyperX DDR3 1866 16GB + Patriot Memory DDR3 1866 16GB
Video Card(s)	Asus R9 290 OC @ GPU - 1050, MEM - 1300
Storage	Inland 256GB PCIe NVMe SSD for OS, WDC Black - 2TB + 1TB Storage, Inland 480GB SSD - Games
Display(s)	3 x 1080P LCDs - Acer 25" + Acer 23" + HP 23"
Case	AeroCool XPredator X3
Audio Device(s)	Built-in Realtek
Power Supply	Corsair HX1000 Modular
Software	Windows 10 Pro 64 bit

System Name	Shaman of Sexy
Processor	AMD Phenom II X4 955 BE@4Ghz EK Supreme Block
Motherboard	M3A79-T Deluxe Anfi-Tech Waterblocks
Cooling	Magicool 360 + 120 + 120 Slim scythe slipped Laing DDC-1/T
Memory	4GB Corsair Dominator CM2X2048-8500C5D
Video Card(s)	Sapphire ATI Radeon HD 4870 X2 EK 4870 X2 Block
Storage	RAID 0 Seagate
Display(s)	Samsung 226BW 22"
Case	CoolerMaster Cosmos RC-1000 in mod progress
Audio Device(s)	onboard
Power Supply	Coba Nitrox 750W
Software	Windows 7 Ultimate
Benchmark Scores	http://service.futuremark.com/compare?3dmv=1056967

System Name	RyzenGtEvo/ Asus strix scar II
Processor	Amd R5 5900X/ Intel 8750H
Motherboard	Crosshair hero8 impact/Asus
Cooling	360EK extreme rad+ 360$EK slim all push, cpu ek suprim Gpu full cover all EK
Memory	Corsair Vengeance Rgb pro 3600cas14 16Gb in four sticks./16Gb/16GB
Video Card(s)	Powercolour RX7900XT Reference/Rtx 2060
Storage	Silicon power 2TB nvme/8Tb external/1Tb samsung Evo nvme 2Tb sata ssd/1Tb nvme
Display(s)	Samsung UAE28"850R 4k freesync.dell shiter
Case	Lianli 011 dynamic/strix scar2
Audio Device(s)	Xfi creative 7.1 on board ,Yamaha dts av setup, corsair void pro headset
Power Supply	corsair 1200Hxi/Asus stock
Mouse	Roccat Kova/ Logitech G wireless
Keyboard	Roccat Aimo 120
VR HMD	Oculus rift
Software	Win 10 Pro
Benchmark Scores	8726 vega 3dmark timespy/ laptop Timespy 6506

System Name	All the cores
Processor	2990WX
Motherboard	Asrock X399M
Cooling	CPU-XSPC RayStorm Neo, 2x240mm+360mm, D5PWM+140mL, GPU-2x360mm, 2xbyski, D4+D5+100mL
Memory	4x16GB G.Skill 3600
Video Card(s)	(2) EVGA SC BLACK 1080Ti's
Storage	2x Samsung SM951 512GB, Samsung PM961 512GB
Display(s)	Dell UP2414Q 3840X2160@60hz
Case	Caselabs Mercury S5+pedestal
Audio Device(s)	Fischer HA-02->Fischer FA-002W High edition/FA-003/Jubilate/FA-011 depending on my mood
Power Supply	Seasonic Prime 1200w
Mouse	Thermaltake Theron, Steam controller
Keyboard	Keychron K8
Software	W10P

AMD FX OC'ers Club

ThE_MaD_ShOt

suraswami

n0tiert

TheoneandonlyMrK

cdawall

where the hell are my stars

ThE_MaD_ShOt

Random Murderer

The Anti-Midas

ThE_MaD_ShOt

suraswami

TheoneandonlyMrK

Johan45

nemesis.ie

d1nky

Random Murderer

The Anti-Midas

suraswami

Johan45

d1nky

Random Murderer

The Anti-Midas

d1nky

TheoneandonlyMrK

Durvelle27

Moderator

d1nky

TheoneandonlyMrK

d1nky

Durvelle27

Moderator

System Name	TOO MUCH RADIATOR! \| The TV Box a.k.a. The Shoebox
Processor	Core i7 4930K @ 4.5GHz \| Core i5 6600K @ 4.5GHz
Motherboard	Asus X79 Rampage IV Extreme \| Asus Z170i Pro Gaming
Cooling	Custom water on CPU and GPU, dual 360mm radiators \| Corsair H80i
Memory	4x 8GB G.Skill TridentX DDR3-1600 \| 2x 4GB G.Skill RipJaws 4 DDR4-3000
Video Card(s)	Sapphire AMD R9 295x2 \| PowerColor AMD HD7970
Storage	Samsung SSD 830 256GB, various others \| 2x 1TB Seagate Barracudas in RAID1
Display(s)	Dell U2713HM 2560x1440 IPS \| Panasonic TC-L32E5 1080p IPS TV
Case	Thermaltake Suppressor F51 (stripped down to hold two radiators) \| Cooler Master Elite 130
Audio Device(s)	RM-DAC -> Xiang Sheng 708b -> Sennheiser HD650 \| HDMI sound device on 7970
Power Supply	LEPA G1600-MA 1600W \| Corsair CX750M 750W
Software	Win 10 64
Benchmark Scores	over 9000 BungholioMarks, "Bitchin' Fast"

System Name	Gamer/ HTPC
Processor	AMD Ryzen 5 2600
Motherboard	ROG Crosshair VI
Cooling	Alphacool Eisbaer 420 AIO
Memory	G.Skill TridentZ RGB 2x8GB 3333 CL14
Video Card(s)	Gigabyte Aorus RX 580
Storage	Corsair Neutron 480 GB
Display(s)	Samsung 42" 1080p
Case	Phanteks Enthoo Luxe Tempered Glass
Power Supply	Corsair 750
Software	Win10 Pro
Benchmark Scores	http://hwbot.org/user/johan45/

System Name	"Run of the mill" (except GPU)
Processor	R9 3900X
Motherboard	ASRock X470 Taich Ultimate
Cooling	Cryorig (not recommended)
Memory	32GB (2 x 16GB) Team 3200 MT/s, CL14
Video Card(s)	Radeon RX6900XT
Storage	Samsung 970 Evo plus 1TB NVMe
Display(s)	Samsung Q95T
Case	Define R5
Audio Device(s)	On board
Power Supply	Seasonic Prime 1000W
Mouse	Roccat Leadr
Keyboard	K95 RGB
Software	Windows 11 Pro x64, insider preview dev channel
Benchmark Scores	#1 worldwide on 3D Mark 99, back in the (P133) days. :)

System Name	Zotan
Processor	i9-10850K
Motherboard	Gigabyte Z490 Gaming X AX
Cooling	H100
Memory	32GB Viper 3200
Video Card(s)	Zotac RTX3080
Case	Airflow 275R
Power Supply	RMX850
Benchmark Scores	d1nky@hwbot.org

System Name	Black Prometheus
Processor	\|AMD Ryzen 7 1700X
Motherboard	ASRock B550M Pro4\|MSI X370 Gaming PLUS
Cooling	Thermalright PA120 SE \| AMD Stock Cooler
Memory	G.Skill 64GB(2x32GB) 3200MHz \| 32GB(4x8GB) DDR4
Video Card(s)	\|AMD R9 290
Storage	Sandisk X300 512GB + WD Black 6TB+WD Black 6TB
Display(s)	LG Nanocell85 49" 4K 120Hz + ACER AOPEN 34" 3440x1440 144Hz
Case	DeepCool Matrexx 55 V3 w/ 6x120mm Intake + 3x120mm Exhaust
Audio Device(s)	LG Dolby Atmos 5.1
Power Supply	Corsair RMX850 Fully Modular\| EVGA 750W G2
Mouse	Logitech Trackman
Keyboard	Logitech K350
Software	Windows 10 EDU x64