• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

[Build Log] MiT X 5 Water Cooled Micro ITX Worklog

Joined
Aug 17, 2009
Messages
1,585 (0.30/day)
Location
Los Angeles/Orange County CA
System Name Vulcan
Processor i6 6600K
Motherboard GIGABYTE Z170X UD3
Cooling Thermaltake Frio Silent 14
Memory 16GB Corsair Vengeance LPX 16GB (2 x 8GB)
Video Card(s) ASUS Strix GTX 970
Storage Mushkin Enhanced Reactor 1TB SSD
Display(s) QNIX 27 Inch 1440p
Case Fractal Design Define S
Audio Device(s) On Board
Power Supply Cooler Master V750
Software Win 10 64-bit
Looking forward to your progress. Thanks for the pics.
 
Joined
Aug 3, 2008
Messages
1,644 (0.29/day)
System Name Black Killing Machine
Processor Delidded NO IHS mount Intel i7-4770k
Motherboard Gigabyte Z87X-OC
Cooling Swiftech DIR655 pump, Watercool HEATKILLER® GPU-X³ 79X0 Ni-Bl gpu, DT SNIPER CPU block, UT60 420 RAD
Memory Gskill Trident 2400mhz CL9 Samsung IC9
Video Card(s) SAPPHIRE HD7950 OC 950mhz Edition, VaporX HD7950
Storage 2xM4 Crucial 64GB RAID 0, 1 OCZ AGILILITY 3 60GB, WDCB 500GB x2RAID0, WD Green, Hitachi 1TB
Display(s) Samsung SyncMaster 226BW and 24" 120hz BenQ gamer
Case SilverStone Raven rv-02
Audio Device(s) Audio Technica ATH-AD900 headphones, Topping D2 DAC/Headphone AMP
Power Supply Seasonic Platinum 860
Software Windows 7 Pro 64bit
Benchmark Scores http://hwbot.org/user/sonda5/ Delidding is magic. http://valid.canardpc.com/2878462
umm thats kinda hard since behind front panel may not fit the fans, btw have you measure the space? you may change your front fans


I measured the lip of the front case cover to be about 14/16" deep and there is a little crack to the front case as well about 1/16".


I think the 20mm radiator with a slim filter will fit.
 
Joined
Jan 18, 2012
Messages
751 (0.17/day)
System Name My PC
Processor i7 4790k @4.4ghz
Motherboard Gigabyte z97m-d3h
Cooling Corsair H105
Memory 4x4GB Corsair Dominator Platinum 2133-9-11-11-31-1T
Video Card(s) GTX970 Stric oc
Storage Samsung 840Pro 512GB
Display(s) Asus ROG SWIFT
Case Lian Li 359
Audio Device(s) Denon DA-300USB / Denon AH-D5000
Power Supply Corsair AX860
Mouse Roccat Kone Pure Optical
Keyboard Corsair K70
Software Win10 64-bit home
I think you should use the 20mm fans... think that the fans pushing air will already provide airflow through the radiator so the pull fans are just there to evacuate heat faster.
 
Joined
Aug 3, 2008
Messages
1,644 (0.29/day)
System Name Black Killing Machine
Processor Delidded NO IHS mount Intel i7-4770k
Motherboard Gigabyte Z87X-OC
Cooling Swiftech DIR655 pump, Watercool HEATKILLER® GPU-X³ 79X0 Ni-Bl gpu, DT SNIPER CPU block, UT60 420 RAD
Memory Gskill Trident 2400mhz CL9 Samsung IC9
Video Card(s) SAPPHIRE HD7950 OC 950mhz Edition, VaporX HD7950
Storage 2xM4 Crucial 64GB RAID 0, 1 OCZ AGILILITY 3 60GB, WDCB 500GB x2RAID0, WD Green, Hitachi 1TB
Display(s) Samsung SyncMaster 226BW and 24" 120hz BenQ gamer
Case SilverStone Raven rv-02
Audio Device(s) Audio Technica ATH-AD900 headphones, Topping D2 DAC/Headphone AMP
Power Supply Seasonic Platinum 860
Software Windows 7 Pro 64bit
Benchmark Scores http://hwbot.org/user/sonda5/ Delidding is magic. http://valid.canardpc.com/2878462
I think you should use the 20mm fans... think that the fans pushing air will already provide airflow through the radiator so the pull fans are just there to evacuate heat faster.

The front fans are going to push air into the radiator and the fans on the inside of the case are going to pull. Both jobs are important. I'd like to have the AP 15 (120x25mm) fans for both but I may have to go with 120x20 mm fans on the front to push the air in because the front of the case isn't deep enough to fit the 120x25mm fans but will work with the 120x20 fans.


I also have an idea to mod the front of the case but it seems like too much work and money just to get the fans that I want to use. I would like to keep the clean Lian Li look on the front but I could go monster look.
 
Last edited:
Joined
Jun 27, 2011
Messages
6,680 (1.43/day)
Processor 7800x3d
Motherboard Gigabyte B650 Auros Elite AX
Cooling Custom Water
Memory GSKILL 2x16gb 6000mhz Cas 30 with custom timings
Video Card(s) MSI RX 6750 XT MECH 2X 12G OC
Storage Adata SX8200 1tb with Windows, Samsung 990 Pro 2tb with games
Display(s) HP Omen 27q QHD 165hz
Case ThermalTake P3
Power Supply SuperFlower Leadex Titanium
Software Windows 11 64 Bit
Benchmark Scores CB23: 1811 / 19424 CB24: 1136 / 7687
You could always cut a half inch off the gpu..
 
Joined
Aug 3, 2008
Messages
1,644 (0.29/day)
System Name Black Killing Machine
Processor Delidded NO IHS mount Intel i7-4770k
Motherboard Gigabyte Z87X-OC
Cooling Swiftech DIR655 pump, Watercool HEATKILLER® GPU-X³ 79X0 Ni-Bl gpu, DT SNIPER CPU block, UT60 420 RAD
Memory Gskill Trident 2400mhz CL9 Samsung IC9
Video Card(s) SAPPHIRE HD7950 OC 950mhz Edition, VaporX HD7950
Storage 2xM4 Crucial 64GB RAID 0, 1 OCZ AGILILITY 3 60GB, WDCB 500GB x2RAID0, WD Green, Hitachi 1TB
Display(s) Samsung SyncMaster 226BW and 24" 120hz BenQ gamer
Case SilverStone Raven rv-02
Audio Device(s) Audio Technica ATH-AD900 headphones, Topping D2 DAC/Headphone AMP
Power Supply Seasonic Platinum 860
Software Windows 7 Pro 64bit
Benchmark Scores http://hwbot.org/user/sonda5/ Delidding is magic. http://valid.canardpc.com/2878462
You could always cut a half inch off the gpu..


I'll probably preserve the front of the case and use 120x20mm fan for front push fans and then get a shorter better video card later on and then stick the other nice AP15 fans on the inside in push.
 
Joined
Jun 27, 2011
Messages
6,680 (1.43/day)
Processor 7800x3d
Motherboard Gigabyte B650 Auros Elite AX
Cooling Custom Water
Memory GSKILL 2x16gb 6000mhz Cas 30 with custom timings
Video Card(s) MSI RX 6750 XT MECH 2X 12G OC
Storage Adata SX8200 1tb with Windows, Samsung 990 Pro 2tb with games
Display(s) HP Omen 27q QHD 165hz
Case ThermalTake P3
Power Supply SuperFlower Leadex Titanium
Software Windows 11 64 Bit
Benchmark Scores CB23: 1811 / 19424 CB24: 1136 / 7687
This might get a bit too complicated but an pcie extender cable might allow you to mount the card in a place to allow the radiator to fit. Then there is the problems of where/how to mount it while still having video out from the card.
 
Joined
Aug 3, 2008
Messages
1,644 (0.29/day)
System Name Black Killing Machine
Processor Delidded NO IHS mount Intel i7-4770k
Motherboard Gigabyte Z87X-OC
Cooling Swiftech DIR655 pump, Watercool HEATKILLER® GPU-X³ 79X0 Ni-Bl gpu, DT SNIPER CPU block, UT60 420 RAD
Memory Gskill Trident 2400mhz CL9 Samsung IC9
Video Card(s) SAPPHIRE HD7950 OC 950mhz Edition, VaporX HD7950
Storage 2xM4 Crucial 64GB RAID 0, 1 OCZ AGILILITY 3 60GB, WDCB 500GB x2RAID0, WD Green, Hitachi 1TB
Display(s) Samsung SyncMaster 226BW and 24" 120hz BenQ gamer
Case SilverStone Raven rv-02
Audio Device(s) Audio Technica ATH-AD900 headphones, Topping D2 DAC/Headphone AMP
Power Supply Seasonic Platinum 860
Software Windows 7 Pro 64bit
Benchmark Scores http://hwbot.org/user/sonda5/ Delidding is magic. http://valid.canardpc.com/2878462
This might get a bit too complicated but an pcie extender cable might allow you to mount the card in a place to allow the radiator to fit. Then there is the problems of where/how to mount it while still having video out from the card.


I have been thinking about this and it may look odd but work well. I think I could mount the card vertical from the top of the case. :D


I'm having some problems with a new XSPC HD79XX block that I was gong to mod for this card, it has some rough spots on it and looks like a poorly made full cover block.
 
Joined
Nov 26, 2008
Messages
4,251 (0.76/day)
Location
California
System Name New Build - Oct. 2021
Processor Intel i7 10700k
Motherboard Asus TUF Gaming H570-PRO
Cooling Corsair H100i
Memory Corsair Vengence 16gb 3600 mhz
Video Card(s) Gigabyte RTX 3060ti 8gb
Storage 1Tb Samsung 970 EVO NvMe m.2
Display(s) 27" LG Ultragear 144hz
Case Fractal Design- Meshify 2
Audio Device(s) Onborad dts
Power Supply Corsair RX 650 W
Mouse Roccat Kiro
Keyboard Razer Tarantula
Software Windows 10 Home x64

That radiator is a BEAST!!:eek:
 
Joined
Jun 27, 2011
Messages
6,680 (1.43/day)
Processor 7800x3d
Motherboard Gigabyte B650 Auros Elite AX
Cooling Custom Water
Memory GSKILL 2x16gb 6000mhz Cas 30 with custom timings
Video Card(s) MSI RX 6750 XT MECH 2X 12G OC
Storage Adata SX8200 1tb with Windows, Samsung 990 Pro 2tb with games
Display(s) HP Omen 27q QHD 165hz
Case ThermalTake P3
Power Supply SuperFlower Leadex Titanium
Software Windows 11 64 Bit
Benchmark Scores CB23: 1811 / 19424 CB24: 1136 / 7687
That radiator is a BEAST!!:eek:

Nah, its a monsta. Cools like a beast though.

One question sonda5, why did you go with the xspc block? Sad to hear it isn't working out.
 
Joined
Aug 3, 2008
Messages
1,644 (0.29/day)
System Name Black Killing Machine
Processor Delidded NO IHS mount Intel i7-4770k
Motherboard Gigabyte Z87X-OC
Cooling Swiftech DIR655 pump, Watercool HEATKILLER® GPU-X³ 79X0 Ni-Bl gpu, DT SNIPER CPU block, UT60 420 RAD
Memory Gskill Trident 2400mhz CL9 Samsung IC9
Video Card(s) SAPPHIRE HD7950 OC 950mhz Edition, VaporX HD7950
Storage 2xM4 Crucial 64GB RAID 0, 1 OCZ AGILILITY 3 60GB, WDCB 500GB x2RAID0, WD Green, Hitachi 1TB
Display(s) Samsung SyncMaster 226BW and 24" 120hz BenQ gamer
Case SilverStone Raven rv-02
Audio Device(s) Audio Technica ATH-AD900 headphones, Topping D2 DAC/Headphone AMP
Power Supply Seasonic Platinum 860
Software Windows 7 Pro 64bit
Benchmark Scores http://hwbot.org/user/sonda5/ Delidding is magic. http://valid.canardpc.com/2878462
Nah, its a monsta. Cools like a beast though.

One question sonda5, why did you go with the xspc block? Sad to hear it isn't working out.

This is the new style that has 0.5mm fins which are half the spacing size of the first edition. This should lead to better cooling than the first version.

The only real reason I bought this block was because I think I can mod it to fit the Vapor X HD7950.

http://www.xs-pc.com/products/waterblocks/gpu-waterblocks/razor-7970-new-style/
 
Joined
Aug 3, 2008
Messages
1,644 (0.29/day)
System Name Black Killing Machine
Processor Delidded NO IHS mount Intel i7-4770k
Motherboard Gigabyte Z87X-OC
Cooling Swiftech DIR655 pump, Watercool HEATKILLER® GPU-X³ 79X0 Ni-Bl gpu, DT SNIPER CPU block, UT60 420 RAD
Memory Gskill Trident 2400mhz CL9 Samsung IC9
Video Card(s) SAPPHIRE HD7950 OC 950mhz Edition, VaporX HD7950
Storage 2xM4 Crucial 64GB RAID 0, 1 OCZ AGILILITY 3 60GB, WDCB 500GB x2RAID0, WD Green, Hitachi 1TB
Display(s) Samsung SyncMaster 226BW and 24" 120hz BenQ gamer
Case SilverStone Raven rv-02
Audio Device(s) Audio Technica ATH-AD900 headphones, Topping D2 DAC/Headphone AMP
Power Supply Seasonic Platinum 860
Software Windows 7 Pro 64bit
Benchmark Scores http://hwbot.org/user/sonda5/ Delidding is magic. http://valid.canardpc.com/2878462
Bump for an update in the parts lists.
Had some problems with a part but back on track now.

Will be testing new XSPC RAZER HD7970 "New Edition" soon. If you want to read up on my test I am comparing it to my HEatkiller block that is on my HD7950 950mhz Edition.

My tests here: http://www.overclock.net/t/1366829/...or-hd-7970-full-coverage-vga-block-new-design


I'd like to thank JAMES888 for giving me some good ideas to help improve my loop. :cool:
 
Joined
May 1, 2008
Messages
1,039 (0.18/day)
Location
Frankfurt/Main - Germany
System Name Shaman of Sexy
Processor AMD Phenom II X4 955 BE@4Ghz EK Supreme Block
Motherboard M3A79-T Deluxe Anfi-Tech Waterblocks
Cooling Magicool 360 + 120 + 120 Slim scythe slipped Laing DDC-1/T
Memory 4GB Corsair Dominator CM2X2048-8500C5D
Video Card(s) Sapphire ATI Radeon HD 4870 X2 EK 4870 X2 Block
Storage RAID 0 Seagate
Display(s) Samsung 226BW 22"
Case CoolerMaster Cosmos RC-1000 in mod progress
Audio Device(s) onboard
Power Supply Coba Nitrox 750W
Software Windows 7 Ultimate
Benchmark Scores http://service.futuremark.com/compare?3dmv=1056967
The front cover of the case will not fit properly with the 120x25 mm fans. I really wanted to use the fans but I am considering getting a 120x20mm fan to preserve the front of the case. If I stick with the Scythe fans I'm going to have to hack up the front of case to allow the fans to stick out. not going to look pretty.


I wish Koolance made a 2x120mm radiator shroud so that I could stick that onto the front to the case. I think that would look tough.

Not sure what I am going to do.


I think the koolance 2x92mm fan shroud could be modified to fit over the fans but It's going to take alot of hacking.


I'm leaning towards just using 120x20mm fans on the front to preserve the front of the case....


what about using 2x



Scythe Slip Stream Slim 120 mm Fan (12 mm height, regular 25mm height) and 2 regular
to go push / pull
 
Joined
Aug 3, 2008
Messages
1,644 (0.29/day)
System Name Black Killing Machine
Processor Delidded NO IHS mount Intel i7-4770k
Motherboard Gigabyte Z87X-OC
Cooling Swiftech DIR655 pump, Watercool HEATKILLER® GPU-X³ 79X0 Ni-Bl gpu, DT SNIPER CPU block, UT60 420 RAD
Memory Gskill Trident 2400mhz CL9 Samsung IC9
Video Card(s) SAPPHIRE HD7950 OC 950mhz Edition, VaporX HD7950
Storage 2xM4 Crucial 64GB RAID 0, 1 OCZ AGILILITY 3 60GB, WDCB 500GB x2RAID0, WD Green, Hitachi 1TB
Display(s) Samsung SyncMaster 226BW and 24" 120hz BenQ gamer
Case SilverStone Raven rv-02
Audio Device(s) Audio Technica ATH-AD900 headphones, Topping D2 DAC/Headphone AMP
Power Supply Seasonic Platinum 860
Software Windows 7 Pro 64bit
Benchmark Scores http://hwbot.org/user/sonda5/ Delidding is magic. http://valid.canardpc.com/2878462
what about using 2x

http://img.techpowerup.org/130224/Slip-Stream-120-SLIM--fan3_01.jpg

Scythe Slip Stream Slim 120 mm Fan (12 mm height, regular 25mm height) and 2 regular
to go push / pull


Thanks. :)

I just happen to have 2 of those sitting around and they are nice little fans but I want to use a more proper water cooling fan.

I have a few ideas in mind but right now I'm focusing on other areas of my loop. The front end of the case will come together once I get my loop configuration down.
 
Joined
May 1, 2008
Messages
1,039 (0.18/day)
Location
Frankfurt/Main - Germany
System Name Shaman of Sexy
Processor AMD Phenom II X4 955 BE@4Ghz EK Supreme Block
Motherboard M3A79-T Deluxe Anfi-Tech Waterblocks
Cooling Magicool 360 + 120 + 120 Slim scythe slipped Laing DDC-1/T
Memory 4GB Corsair Dominator CM2X2048-8500C5D
Video Card(s) Sapphire ATI Radeon HD 4870 X2 EK 4870 X2 Block
Storage RAID 0 Seagate
Display(s) Samsung 226BW 22"
Case CoolerMaster Cosmos RC-1000 in mod progress
Audio Device(s) onboard
Power Supply Coba Nitrox 750W
Software Windows 7 Ultimate
Benchmark Scores http://service.futuremark.com/compare?3dmv=1056967
Thanks. :)

I just happen to have 2 of those sitting around and they are nice little fans but I want to use a more proper water cooling fan.

I have a few ideas in mind but right now I'm focusing on other areas of my loop. The front end of the case will come together once I get my loop configuration down.

what i was trying to tell is, attach em @ gfx side as pull and the "proper" fans as push
that fixes your prob with the space in gfx card area



might also safe you from cutting the Case front
 
Last edited:
Joined
Aug 3, 2008
Messages
1,644 (0.29/day)
System Name Black Killing Machine
Processor Delidded NO IHS mount Intel i7-4770k
Motherboard Gigabyte Z87X-OC
Cooling Swiftech DIR655 pump, Watercool HEATKILLER® GPU-X³ 79X0 Ni-Bl gpu, DT SNIPER CPU block, UT60 420 RAD
Memory Gskill Trident 2400mhz CL9 Samsung IC9
Video Card(s) SAPPHIRE HD7950 OC 950mhz Edition, VaporX HD7950
Storage 2xM4 Crucial 64GB RAID 0, 1 OCZ AGILILITY 3 60GB, WDCB 500GB x2RAID0, WD Green, Hitachi 1TB
Display(s) Samsung SyncMaster 226BW and 24" 120hz BenQ gamer
Case SilverStone Raven rv-02
Audio Device(s) Audio Technica ATH-AD900 headphones, Topping D2 DAC/Headphone AMP
Power Supply Seasonic Platinum 860
Software Windows 7 Pro 64bit
Benchmark Scores http://hwbot.org/user/sonda5/ Delidding is magic. http://valid.canardpc.com/2878462
what i was trying to tell is, attach em @ gfx side as pull and the "proper" fans as push
that fixes your prob with the space in gfx card area


might also safe you from cutting the Case front


Thanks for the help. I don't mean to be rude but I already thought about that as well and... I'm really hell bent on getting the AP15's in push pull or putting some Yate Loon high speed 120x20mm up front....

:toast:
 
Joined
Jun 27, 2011
Messages
6,680 (1.43/day)
Processor 7800x3d
Motherboard Gigabyte B650 Auros Elite AX
Cooling Custom Water
Memory GSKILL 2x16gb 6000mhz Cas 30 with custom timings
Video Card(s) MSI RX 6750 XT MECH 2X 12G OC
Storage Adata SX8200 1tb with Windows, Samsung 990 Pro 2tb with games
Display(s) HP Omen 27q QHD 165hz
Case ThermalTake P3
Power Supply SuperFlower Leadex Titanium
Software Windows 11 64 Bit
Benchmark Scores CB23: 1811 / 19424 CB24: 1136 / 7687
It is a race now to see who implements that idea first!
 
Joined
May 1, 2008
Messages
1,039 (0.18/day)
Location
Frankfurt/Main - Germany
System Name Shaman of Sexy
Processor AMD Phenom II X4 955 BE@4Ghz EK Supreme Block
Motherboard M3A79-T Deluxe Anfi-Tech Waterblocks
Cooling Magicool 360 + 120 + 120 Slim scythe slipped Laing DDC-1/T
Memory 4GB Corsair Dominator CM2X2048-8500C5D
Video Card(s) Sapphire ATI Radeon HD 4870 X2 EK 4870 X2 Block
Storage RAID 0 Seagate
Display(s) Samsung 226BW 22"
Case CoolerMaster Cosmos RC-1000 in mod progress
Audio Device(s) onboard
Power Supply Coba Nitrox 750W
Software Windows 7 Ultimate
Benchmark Scores http://service.futuremark.com/compare?3dmv=1056967
Thanks for the help. I don't mean to be rude but I already thought about that as well and... I'm really hell bent on getting the AP15's in push pull or putting some Yate Loon high speed 120x20mm up front....

:toast:

i´m looking forward how u gonna manage it :cool:
 
Joined
Aug 3, 2008
Messages
1,644 (0.29/day)
System Name Black Killing Machine
Processor Delidded NO IHS mount Intel i7-4770k
Motherboard Gigabyte Z87X-OC
Cooling Swiftech DIR655 pump, Watercool HEATKILLER® GPU-X³ 79X0 Ni-Bl gpu, DT SNIPER CPU block, UT60 420 RAD
Memory Gskill Trident 2400mhz CL9 Samsung IC9
Video Card(s) SAPPHIRE HD7950 OC 950mhz Edition, VaporX HD7950
Storage 2xM4 Crucial 64GB RAID 0, 1 OCZ AGILILITY 3 60GB, WDCB 500GB x2RAID0, WD Green, Hitachi 1TB
Display(s) Samsung SyncMaster 226BW and 24" 120hz BenQ gamer
Case SilverStone Raven rv-02
Audio Device(s) Audio Technica ATH-AD900 headphones, Topping D2 DAC/Headphone AMP
Power Supply Seasonic Platinum 860
Software Windows 7 Pro 64bit
Benchmark Scores http://hwbot.org/user/sonda5/ Delidding is magic. http://valid.canardpc.com/2878462
It is a race now to see who implements that idea first!



No race here. I'm just enjoying the build.

Good idea and I hope it works out.
 
Joined
Aug 5, 2007
Messages
2,320 (0.38/day)
Location
Australia
System Name All Ryze
Processor Ryzen 7 1700
Motherboard MSI X370 Pro Carbon
Cooling Air
Memory G-skill Flare x 16GB 2400MHz
Video Card(s) MSI 1080
Storage Intel 600p NVMe 512GB for OS , 1TB WD Black and a 4TB Toshiba
Display(s) BENQ PD3200U
Case Phanteks
Audio Device(s) Onboard
Power Supply Corsair 750W
Mouse Logitech G403 wired
Keyboard G19
Software Win 10 Pro
subbed , looking good.
 
Joined
Aug 3, 2008
Messages
1,644 (0.29/day)
System Name Black Killing Machine
Processor Delidded NO IHS mount Intel i7-4770k
Motherboard Gigabyte Z87X-OC
Cooling Swiftech DIR655 pump, Watercool HEATKILLER® GPU-X³ 79X0 Ni-Bl gpu, DT SNIPER CPU block, UT60 420 RAD
Memory Gskill Trident 2400mhz CL9 Samsung IC9
Video Card(s) SAPPHIRE HD7950 OC 950mhz Edition, VaporX HD7950
Storage 2xM4 Crucial 64GB RAID 0, 1 OCZ AGILILITY 3 60GB, WDCB 500GB x2RAID0, WD Green, Hitachi 1TB
Display(s) Samsung SyncMaster 226BW and 24" 120hz BenQ gamer
Case SilverStone Raven rv-02
Audio Device(s) Audio Technica ATH-AD900 headphones, Topping D2 DAC/Headphone AMP
Power Supply Seasonic Platinum 860
Software Windows 7 Pro 64bit
Benchmark Scores http://hwbot.org/user/sonda5/ Delidding is magic. http://valid.canardpc.com/2878462
It is a race now to see who implements that idea first!


Update on my Monster build featuring the Asus Maximus VI Impact, 4770k and AMD R9 290x. Look ma no reservoir in my loop! :cool:

Main work is done. Finish work to follow.


 
Joined
Jun 27, 2011
Messages
6,680 (1.43/day)
Processor 7800x3d
Motherboard Gigabyte B650 Auros Elite AX
Cooling Custom Water
Memory GSKILL 2x16gb 6000mhz Cas 30 with custom timings
Video Card(s) MSI RX 6750 XT MECH 2X 12G OC
Storage Adata SX8200 1tb with Windows, Samsung 990 Pro 2tb with games
Display(s) HP Omen 27q QHD 165hz
Case ThermalTake P3
Power Supply SuperFlower Leadex Titanium
Software Windows 11 64 Bit
Benchmark Scores CB23: 1811 / 19424 CB24: 1136 / 7687
I like your taste in hardware.

I have the same motherboard, ram, cpu, a sapphire 7970 compared to your 7950.

My loop has an apogee drive II in it so less tubing. I am quite fond of it.
 
Joined
Aug 3, 2008
Messages
1,644 (0.29/day)
System Name Black Killing Machine
Processor Delidded NO IHS mount Intel i7-4770k
Motherboard Gigabyte Z87X-OC
Cooling Swiftech DIR655 pump, Watercool HEATKILLER® GPU-X³ 79X0 Ni-Bl gpu, DT SNIPER CPU block, UT60 420 RAD
Memory Gskill Trident 2400mhz CL9 Samsung IC9
Video Card(s) SAPPHIRE HD7950 OC 950mhz Edition, VaporX HD7950
Storage 2xM4 Crucial 64GB RAID 0, 1 OCZ AGILILITY 3 60GB, WDCB 500GB x2RAID0, WD Green, Hitachi 1TB
Display(s) Samsung SyncMaster 226BW and 24" 120hz BenQ gamer
Case SilverStone Raven rv-02
Audio Device(s) Audio Technica ATH-AD900 headphones, Topping D2 DAC/Headphone AMP
Power Supply Seasonic Platinum 860
Software Windows 7 Pro 64bit
Benchmark Scores http://hwbot.org/user/sonda5/ Delidding is magic. http://valid.canardpc.com/2878462
I like your taste in hardware.

I have the same motherboard, ram, cpu, a sapphire 7970 compared to your 7950.

My loop has an apogee drive II in it so less tubing. I am quite fond of it.

Very nice.

My 4770k is bare die mount and its to delicate to put a motor vibrating on it.

Love the no reservoir loop with the Monster 240 radiator which works great as we have done it. Thanks for the idea. :cool:
 
Joined
Jun 27, 2011
Messages
6,680 (1.43/day)
Processor 7800x3d
Motherboard Gigabyte B650 Auros Elite AX
Cooling Custom Water
Memory GSKILL 2x16gb 6000mhz Cas 30 with custom timings
Video Card(s) MSI RX 6750 XT MECH 2X 12G OC
Storage Adata SX8200 1tb with Windows, Samsung 990 Pro 2tb with games
Display(s) HP Omen 27q QHD 165hz
Case ThermalTake P3
Power Supply SuperFlower Leadex Titanium
Software Windows 11 64 Bit
Benchmark Scores CB23: 1811 / 19424 CB24: 1136 / 7687
Very nice.

My 4770k is bare die mount and its to delicate to put a motor vibrating on it.

Love the no reservoir loop with the Monster 240 radiator which works great as we have done it. Thanks for the idea. :cool:

I don't want to risk bare die mounting... I am too clumsy. So far I don't see a need whatsoever. My 4770k hits 55c under max load. 65c if I get the cpu going too.
 
Top