- Joined
- Jan 20, 2007
- Messages
- 217 (0.03/day)
- Location
- Mataram-NTB, Indonesia
System Name | Folding System |
---|---|
Processor | Intel 4770K Haswell |
Motherboard | Gigabyte G1 Sniper |
Cooling | EK Clean CSQ WB + EK CoolStream RAD XTX 480 + EK GTX780Ti Full WB + Swiftech D5 Pump |
Memory | 4 x 4 GB DDR3 GSkill Ripjaws F3 17000 GBZL | 4 x 4GB DDR3 Corsair Dominator Platinum |
Video Card(s) | 2 x Inno3D GTX 780Ti 3GB SLI |
Storage | 2x Patriot Pyro 240GB Raid 0 | 2x WD Green 3TB Raid 0 | 4x Seagate 4TB Raid 0 |
Display(s) | Viewsonic LED VA1938wa 19" / 2 x Dell U2312HM 23" IPS Panel |
Case | Corsair 900D + 1 Aerocool 14cm Fan, 3 CM Fan 12cm, 4 Scythe Slim Fan 12cm, 4 Aerocool Shark 12cm |
Audio Device(s) | ASUS Xonar Phoebus + Hippo cri head amp + Sennheiser HD 598 + Razer Megalodon |
Power Supply | Seasonic P1000 Platinum |
Mouse | Logitech G502 |
Keyboard | Gigabyte Aivia Osmium Mech Keyboard |
Software | Windows 10 Home |
Hi guys, i need second opinion here..
I have combine gaming and a folding rig, with HD 6990, it have been running for few years with reference cooling, it's hot, normal gaming load will reach Temp 85C, with folding load it reach 100C. So i already have EK 6990 water block for few month before i have time to install it last night, but i only have EK 140 Rad. the water cooling will only for the GPU. i use 1 Xigmatek 140 fan to pull out the air. no more room for push fan because small space in casing. from my previous experience building several custom watercooling PC the 140 Rad are quite good so at first i think it will be enough to cool 6990.
after preliminary load test the idle temp is low, only around 40C but 5 minutes full load it will reach over 90C and the screen goes blank, with reference cooler sometimes it reach 103C depending on room temp but never cause blank screen. do i need bigger radiator? or something i miss?
I have combine gaming and a folding rig, with HD 6990, it have been running for few years with reference cooling, it's hot, normal gaming load will reach Temp 85C, with folding load it reach 100C. So i already have EK 6990 water block for few month before i have time to install it last night, but i only have EK 140 Rad. the water cooling will only for the GPU. i use 1 Xigmatek 140 fan to pull out the air. no more room for push fan because small space in casing. from my previous experience building several custom watercooling PC the 140 Rad are quite good so at first i think it will be enough to cool 6990.
after preliminary load test the idle temp is low, only around 40C but 5 minutes full load it will reach over 90C and the screen goes blank, with reference cooler sometimes it reach 103C depending on room temp but never cause blank screen. do i need bigger radiator? or something i miss?