In Need Of New Pump and Tubing Suggestions

[Durvelle27]

In need of new pump as my MCP655 bite the dust a few days ago and is no longer working. What would you guys recommend that's not to costly. I'll be running 3x 240MM rads, CPU, and GPU block. Any help is greatly appreciated.

Also tubing i considered already

http://www.performance-pcs.com/cata..._info&cPath=59_413_292_1152&products_id=23922

http://www.performance-pcs.com/cata..._info&cPath=59_413_292_1152&products_id=23360

http://www.performance-pcs.com/cata...oduct_info&cPath=59_413_455&products_id=24994

http://www.performance-pcs.com/cata...oduct_info&cPath=59_413_455&products_id=24997

http://www.performance-pcs.com/cata...duct_info&cPath=59_413_1177&products_id=36728

 

[VSG]

The only soft tubing I can recommend is Primochill Advanced LRT. Norprene is also good but is a different material entirely and has no color options. Note that the LRT tubing, while being the only one yet to not leach plasticizers, can turn yellow at loop temps higher than 35-40 C. Nothing a colored coolant can't handle though!

Is your pump out of warranty? It is so rare To hear a failed D5 pump.

 

[erocker]

Just get colored tubing. I bought two MCP350's cheap from a guy here on TPU that are working great. I think he still has a thread.

 

[Durvelle27]

Just get colored tubing. I bought two MCP350's cheap from a guy here on TPU that are working great. I think he still has a thread.

I really thought about that guy but can't find his thread if my life depended on it

I know colored tubing lol but so many choices. I'm currently using blue PrimcoChill Advance LRT


Also no my 655 does not have warranty

 

[erocker]

Yeah, I'm using PC Adv. Black . I found his thread... He sold out

Ditch one of your Rads. I'm not surprised your pump burnt out. What is the max you want to spend on a pump?

 

[Durvelle27]

Yeah, I'm using PC Adv. Black . I found his thread... He sold out

Ditch one of your Rads. I'm not surprised your pump burnt out. What is the max you want to spend on a pump?

Aww that sucks

Really don't want to ditch a rad and about $50

 

[erocker]

Consider trying two loops?

 

[Durvelle27]

Consider trying two loops?

I don't mind if I can find two pumps as I do have three reservoirs at my disposal.

 

[erocker]

Phobya DC12's and EK DCP 2.2's are cheap and have about the same flow rate as a MCP350. Two of those should work great.

 

[Durvelle27]

Phobya DC12's and EK DCP 2.2's are cheap and have about the same flow rate as a MCP350. Two of those should work great.

Seems both will run $50 each

 

[crazyeyesreaper]

I run the Norprene tubing and love the stuff paired with anti-kink coils you can add a splash of color as well. Have had zero issues with the stuff in my custom AIO which I have checked just recently and required no topping off of fluid after nearly a year.

http://www.frozencpu.com/products/1...moplastic_Elastomer_Tubing.html?tl=g30c99s171

 

[erocker]

Seems both will run $50 each

Which is about as inexpensive as you're going to get with pumps.

 

[Durvelle27]

I run the Norprene tubing and love the stuff paired with anti-kink coils you can add a splash of color as well. Have had zero issues with the stuff in my custom AIO which I have checked just recently and required no topping off of fluid after nearly a year.

http://www.frozencpu.com/products/1...moplastic_Elastomer_Tubing.html?tl=g30c99s171

No need for anti-kink coil but great to hear

Which is about as inexpensive as you're going to get with pumps.

Hmmmmm alright but I'll still keep my eyes open.