• Welcome to TechPowerUp Forums, Guest! Please check out our forum guidelines for info related to our community.

XPredator Build

n0tiert

n0tiert

Joined
May 1, 2008
Messages
1,039 (0.18/day)
Location
Frankfurt/Main - Germany
System Specs
System Name Shaman of Sexy
Processor AMD Phenom II X4 955 BE@4Ghz EK Supreme Block
Motherboard M3A79-T Deluxe Anfi-Tech Waterblocks
Cooling Magicool 360 + 120 + 120 Slim scythe slipped Laing DDC-1/T
Memory 4GB Corsair Dominator CM2X2048-8500C5D
Video Card(s) Sapphire ATI Radeon HD 4870 X2 EK 4870 X2 Block
Storage RAID 0 Seagate
Display(s) Samsung 226BW 22"
Case CoolerMaster Cosmos RC-1000 in mod progress
Audio Device(s) onboard
Power Supply Coba Nitrox 750W
Software Windows 7 Ultimate
Benchmark Scores http://service.futuremark.com/compare?3dmv=1056967
a few Benchmarks Tests.......


3DMark AMD FX-8150








Cinebench 11.5 AMD FX-8150





Unigine 4.0 DX11 AMD FX-8150





FINAL FANTASY XIV Benchmark







ALLBenchmark 1.0 Beta21



SSD Speed Test:



I will do same Test on FX-8350 with this Setup ..... tonight

AMD FX-8350 Results
 
Last edited:
n0tiert

n0tiert

Joined
May 1, 2008
Messages
1,039 (0.18/day)
Location
Frankfurt/Main - Germany
System Specs
System Name Shaman of Sexy
Processor AMD Phenom II X4 955 BE@4Ghz EK Supreme Block
Motherboard M3A79-T Deluxe Anfi-Tech Waterblocks
Cooling Magicool 360 + 120 + 120 Slim scythe slipped Laing DDC-1/T
Memory 4GB Corsair Dominator CM2X2048-8500C5D
Video Card(s) Sapphire ATI Radeon HD 4870 X2 EK 4870 X2 Block
Storage RAID 0 Seagate
Display(s) Samsung 226BW 22"
Case CoolerMaster Cosmos RC-1000 in mod progress
Audio Device(s) onboard
Power Supply Coba Nitrox 750W
Software Windows 7 Ultimate
Benchmark Scores http://service.futuremark.com/compare?3dmv=1056967
build update:

changed CPU to AMD FX-8350

2x Aerocool Shark 140mm Fans Red, the Bitfenix Spectre 140mm was not available.









 
n0tiert

n0tiert

Joined
May 1, 2008
Messages
1,039 (0.18/day)
Location
Frankfurt/Main - Germany
System Specs
System Name Shaman of Sexy
Processor AMD Phenom II X4 955 BE@4Ghz EK Supreme Block
Motherboard M3A79-T Deluxe Anfi-Tech Waterblocks
Cooling Magicool 360 + 120 + 120 Slim scythe slipped Laing DDC-1/T
Memory 4GB Corsair Dominator CM2X2048-8500C5D
Video Card(s) Sapphire ATI Radeon HD 4870 X2 EK 4870 X2 Block
Storage RAID 0 Seagate
Display(s) Samsung 226BW 22"
Case CoolerMaster Cosmos RC-1000 in mod progress
Audio Device(s) onboard
Power Supply Coba Nitrox 750W
Software Windows 7 Ultimate
Benchmark Scores http://service.futuremark.com/compare?3dmv=1056967
as final finish i suggested this pieces:

1x BitFenix 8-Pin EPS12V 1x BitFenix 24-Pin ATX RED and 2x BitFenix 6-Pin PCIe RED/Black



to get that blue PCB covered and stabilize the GPU PCB my personal add would be:



and

Corsair AF120 Performance Edition Twin Pack




^^ Corsair please do this for the GS800 PSU too !!

the grey fans which where included had LED holders but the hole is not drilled
do this Fans have LED holes ?
 
Last edited:
K

king1367

New Member
Joined
Jun 14, 2013
Messages
2 (0.00/day)
aerocool xpredator x3

Hi I have aerocool xpredator x3 do you think I can fit msi z77a-gd55 and h100i in it ?
MY case dimensions are : 527 mm (H)×533 mm (D) ×223 (W)
:confused:
 
n0tiert

n0tiert

Joined
May 1, 2008
Messages
1,039 (0.18/day)
Location
Frankfurt/Main - Germany
System Specs
System Name Shaman of Sexy
Processor AMD Phenom II X4 955 BE@4Ghz EK Supreme Block
Motherboard M3A79-T Deluxe Anfi-Tech Waterblocks
Cooling Magicool 360 + 120 + 120 Slim scythe slipped Laing DDC-1/T
Memory 4GB Corsair Dominator CM2X2048-8500C5D
Video Card(s) Sapphire ATI Radeon HD 4870 X2 EK 4870 X2 Block
Storage RAID 0 Seagate
Display(s) Samsung 226BW 22"
Case CoolerMaster Cosmos RC-1000 in mod progress
Audio Device(s) onboard
Power Supply Coba Nitrox 750W
Software Windows 7 Ultimate
Benchmark Scores http://service.futuremark.com/compare?3dmv=1056967
king1367 said:
Hi I have aerocool xpredator x3 do you think I can fit msi z77a-gd55 and h100i in it ?
MY case dimensions are : 527 mm (H)×533 mm (D) ×223 (W)
:confused:
Click to expand...

the case is almost same as shown here... and yeeah it would fit,
i cannot guaranty that you can center the rad but atleast you should be able to mount it that way:



mainboard should be independent if they do not have huge Mosfet Heatsinks sticking up, since they all get mounted on same position @ top

EDIT:
if you check the upper mounting holes from the X3, there still fits a regular fan between, and the radiator isn´t that thick like the build in upper fan, and usually the mounting holes are close at PCB end.



but seriosly the case sux,

  • upper air flaps clatter
  • flaps can only be open / close
  • front I/O Top is only a sticker no brushed metall/aluminum


you can get better cases in that price range.

hope that help´d ya a bit
 
Last edited:
K

king1367

New Member
Joined
Jun 14, 2013
Messages
2 (0.00/day)
aerocool xpredator x3

QUOTE=n0tiert;2922245]the case is almost same as shown here... and yeeah it would fit,
i cannot guaranty that you can center the rad but atleast you should be able to mount it that way""

As long as I can fit it is okay
I should gone with better case but I bought it anyway
I will sell this build after it finish
My build will be
Intel i7 3770k
Msi z77a-gd55
Evga gtx 650 ti
Xpredator x3
16 gb corsair ram
H100i
1 tb hard
256 ssd
What kind of power supply do you think I should get?
 
n0tiert

n0tiert

Joined
May 1, 2008
Messages
1,039 (0.18/day)
Location
Frankfurt/Main - Germany
System Specs
System Name Shaman of Sexy
Processor AMD Phenom II X4 955 BE@4Ghz EK Supreme Block
Motherboard M3A79-T Deluxe Anfi-Tech Waterblocks
Cooling Magicool 360 + 120 + 120 Slim scythe slipped Laing DDC-1/T
Memory 4GB Corsair Dominator CM2X2048-8500C5D
Video Card(s) Sapphire ATI Radeon HD 4870 X2 EK 4870 X2 Block
Storage RAID 0 Seagate
Display(s) Samsung 226BW 22"
Case CoolerMaster Cosmos RC-1000 in mod progress
Audio Device(s) onboard
Power Supply Coba Nitrox 750W
Software Windows 7 Ultimate
Benchmark Scores http://service.futuremark.com/compare?3dmv=1056967
king1367 said:
QUOTE=n0tiert;2922245]the case is almost same as shown here... and yeeah it would fit,
i cannot guaranty that you can center the rad but atleast you should be able to mount it that way""

As long as I can fit it is okay
I should gone with better case but I bought it anyway
I will sell this build after it finish
My build will be
Intel i7 3770k
Msi z77a-gd55
Evga gtx 650 ti
Xpredator x3
16 gb corsair ram
H100i
1 tb hard
256 ssd
What kind of power supply do you think I should get?
Click to expand...

well my choice would be atleast a 750W so customer could easy add another 650 TI
i always go for higher psu to be save on upgrade/update
 
H

Harvey lewis

New Member
Joined
Oct 29, 2014
Messages
1 (0.00/day)
Do any of the know if the top fan which is 230mm To be removed to attach the h100i heat sink water cooler?
 
ThE_MaD_ShOt

ThE_MaD_ShOt

Joined
Nov 29, 2011
Messages
5,975 (1.32/day)
Location
Hi! I'm from the Internet
System Specs
System Name Selene / Yoda
Processor Fx 8350 @ 4.4 / Phenom II x6 1090t @ 3.6
Motherboard Gigabyte 990FXA-UD3 r4.0 / Gigabyte 890XA-UD3
Cooling H100i / Xig Dark Knight
Memory 4x 8gb G.Skill Snipers / 4x 4gb G.Skill Ares
Video Card(s) Gigabyte R9 290x / XfX DD & VisionTek HD6850's C'fired
Storage 256gb ssd, 2x 2tb Wd Blacks & 1x 1tb Wd black / 1x 1tb
Display(s) Dell Ultra Sharp 2408 WFp / Hp w2207
Case Raidmax Vampire / Chieftec Alum. Dragon Blue
Audio Device(s) Onboard Hd Audio / Onboard Hd Audio
Power Supply Corsair TX 850 watt / Corsair TX 750 watt
Mouse Logitech G500s
Keyboard Corsair Strafe
Software Win 10 pro / Win Vista Home prem. 64 bit
Benchmark Scores What are benchmarks anyway?
He has a h100i installed in the top. So yes
 
eidairaman1

eidairaman1

The Exiled Airman
Joined
Jul 2, 2007
Messages
40,435 (6.58/day)
Location
Republic of Texas (True Patriot)
System Specs
System Name PCGOD
Processor AMD FX 8350@ 5.0GHz
Motherboard Asus TUF 990FX Sabertooth R2 2901 Bios
Cooling Scythe Ashura, 2×BitFenix 230mm Spectre Pro LED (Blue,Green), 2x BitFenix 140mm Spectre Pro LED
Memory 16 GB Gskill Ripjaws X 2133 (2400 OC, 10-10-12-20-20, 1T, 1.65V)
Video Card(s) AMD Radeon 290 Sapphire Vapor-X
Storage Samsung 840 Pro 256GB, WD Velociraptor 1TB
Display(s) NEC Multisync LCD 1700V (Display Port Adapter)
Case AeroCool Xpredator Evil Blue Edition
Audio Device(s) Creative Labs Sound Blaster ZxR
Power Supply Seasonic 1250 XM2 Series (XP3)
Mouse Roccat Kone XTD
Keyboard Roccat Ryos MK Pro
Software Windows 7 Pro 64
Harvey lewis said:
Do any of the know if the top fan which is 230mm To be removed to attach the h100i heat sink water cooler?
Click to expand...

Yes it has to be removed. I own the full size XPredator, theres plenty of cable routing too.

Unfortunately im gonna have to pull my mobo and check for board flexing. This cooler on average runs at 41 degrees... in my specs...
 
Last edited:
You must log in or register to reply here.
Top